Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Tip-Over Hazard: Furniture tip-overs can cause serious or fatal crushing injuries. Always secure this dresser to the wall using the provided anti-tip kit.
- Weight Limits: Do not exceed the specified weight limits for drawers and the top surface. Overloading can cause structural failure and injury.
- Assembly: Assembly requires two adults. Do not attempt to assemble alone. Ensure all hardware is securely tightened before use.
- Children Safety: Keep children away from the assembly area. Do not allow children to climb on or play with the dresser.
- Electrical Safety: Ensure the LED light power cord is not pinched or damaged. Do not expose the LED light components to water.
Package Contents
Verify all components and hardware are present before beginning assembly. If any parts are missing or damaged, contact Homsee customer service.
This product is shipped in one package.
Components Overview
Image: The Homsee 8-Drawer Double Dresser with LED Light, showcasing its white high-gloss finish and integrated LED lighting at the base.
Dimensions and Load Capacity
Image: A detailed diagram illustrating the overall dimensions of the dresser (63"W x 15.7"D x 30.9"H) and individual drawer dimensions (29.6"W x 11.7"D x 4.6"H). It also indicates a load-bearing capacity of 11 lbs per drawer and 66 lbs for the tabletop.
Setup and Assembly Instructions
Assembly is required. Please follow these steps carefully. Do not mix hardware during assembly.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your manual to identify each piece.
- Assemble the Base: Attach the side panels to the bottom panel using the specified hardware (e.g., cam locks, dowels). Ensure the base is stable and level.
- Attach Back Panel: Secure the back panel to the assembled base and side panels. This adds stability to the structure.
- Install Drawer Glides: Attach the drawer glides to the interior side panels of the dresser frame according to the markings. Ensure they are level and aligned.
- Assemble Drawers: For each of the eight drawers, assemble the front, back, and side panels. Insert the bottom panel into the grooves and secure it. Attach the drawer glides to the sides of each drawer.
- Insert Drawers: Carefully slide each assembled drawer into its designated slot in the dresser frame. Test each drawer for smooth operation.
- Install LED Light Strip: Locate the LED light strip and its power adapter. Adhere the light strip to the designated area on the underside of the dresser, ensuring the cable is routed safely and not pinched. Connect the power adapter.
- Secure to Wall (Anti-Tip Kit): Attach the anti-tip bracket to the back of the dresser and to a wall stud using the provided hardware. This step is crucial for safety.
Assembly Video (Example)
Video: A general assembly guide for furniture, demonstrating key steps and techniques. This video is 3 minutes and 19 seconds long.
Operating Instructions
Using the Drawers
The dresser features eight smoothly sliding drawers for storage. To open, gently pull the drawer front. To close, push firmly until it is fully seated. Avoid slamming drawers to prevent damage to the glides.
Image: The Homsee dresser with several drawers partially open, revealing the interior storage space for clothing or other items.
Image: A close-up view of the interior of an open drawer, showing its construction and capacity for storing folded garments.
Operating the LED Light
The integrated LED light strip provides warm white illumination. Connect the power adapter to a standard electrical outlet. The light can be turned on or off using the inline switch on the power cord. The LED light is designed to create an ambient glow at the base of the dresser.
Image: A close-up view of the LED light strip illuminated at the bottom of the dresser, casting a warm glow on the floor.
Product Feature Overview
Video: A brief overview of the dresser's features, including its design and LED lighting. This video is 1 minute and 5 seconds long.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your Homsee dresser.
- Cleaning: Wipe the surface with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the high-gloss finish.
- Spills: Clean spills immediately to prevent staining or damage to the finish.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
- Heat and Moisture: Do not place hot items directly on the surface. Protect the dresser from excessive moisture.
- Hardware: Periodically check all assembly hardware and tighten if necessary to ensure stability.
Image: A close-up view of the dresser's high-gloss white surface, highlighting its smooth and reflective finish.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly or get stuck. | Misaligned glides, loose hardware, obstruction. | Check that drawer glides are correctly installed and aligned. Ensure all screws are tightened. Remove any obstructions in the drawer tracks. |
| LED light does not turn on. | Power not connected, faulty switch, damaged cable. | Ensure the power adapter is securely plugged into a working outlet. Check the inline switch position. Inspect the cable for any visible damage. |
| Dresser feels wobbly. | Loose assembly hardware, uneven floor. | Tighten all assembly screws. Ensure the dresser is placed on a level surface. Use shims if necessary. Verify the anti-tip kit is properly installed. |
Specifications
- Brand: Homsee
- Model: 8 Drawers
- Overall Dimensions (W x D x H): 63" x 15.7" x 30.9"
- Drawer Interior Dimensions (W x D x H): 29.6" x 11.7" x 4.6"
- Material: Engineered Wood
- Finish Type: High Gloss
- Color: White
- Number of Drawers: 8
- Item Weight: 136 lbs
- Load-bearing Capacity (Each Drawer): 11 lbs
- Load-bearing Capacity (Table Top): 66 lbs
- Assembly Required: Yes
Warranty and Support
Homsee products are manufactured with quality and care. For specific warranty details, please refer to the documentation included with your purchase or contact Homsee customer service directly.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Homsee Official Store customer service. Provide your product model number (8 Drawers) and ASIN (B0CB86ZLKR) for faster service.
Homsee Official Store: Contact Seller
