ZAGG InvisibleShield Glass+ Screen Protector for iPhone 15 User Manual

Introduction

Thank you for choosing the ZAGG InvisibleShield Glass+ Screen Protector for your iPhone 15. This screen protector is engineered to provide superior protection against drops, scratches, and smudges, ensuring your device's screen remains pristine. It features Ion Matrix Technology for 3X stronger protection and is made with up to 30% post-consumer recycled glass, reflecting a commitment to both durability and sustainability.

What's in the Box

• ZAGG InvisibleShield Glass+ Screen Protector
• EZ Apply Installation Kit (includes wet wipe, microfiber cloth, dust removal sticker, and installation tray)

Setup & Installation

The ZAGG InvisibleShield Glass+ features an EZ Apply installation system for a simple, precise, and bubble-free application. Follow these steps carefully:

Preparation

1. Clean Your Screen: Use the provided wet wipe to thoroughly clean your iPhone 15 screen, removing any smudges, oils, or fingerprints.
2. Dry Your Screen: Follow up with the microfiber cloth to dry the screen completely, ensuring no moisture remains.
3. Remove Dust: Use the dust removal sticker to pick up any remaining dust particles or debris that may have settled on the screen. Ensure the screen is completely free of dust before proceeding.

Application with EZ Apply Tray

4. Position the Tray: Place the blue EZ Apply tray on a flat, stable surface with the pegs pointing upwards.
5. Insert Your Phone: Carefully set your iPhone 15 into the tray, ensuring the top of your phone aligns with the end of the tray marked 'TOP'.
6. Prepare the Screen Protector: Gently peel away the protective backing from the InvisibleShield using the tab marked '1'. Ensure the adhesive side of the screen protector is facing down and avoid touching the exposed surface.
7. Align and Place: Place the InvisibleShield onto the EZ Apply tray by fitting the cutouts on each tab over the corresponding pegs on the tray. The exposed adhesive side should be facing down towards your phone's screen. The tray holds the InvisibleShield just above the screen for perfect alignment.
8. Apply the Protector: Press down firmly on the center of the InvisibleShield and slowly swipe your finger downwards and across the screen protector. This action will adhere the protector to your phone's screen.
9. Remove Tabs and Top Layer: Detach the top and bottom tabs from the installation tray. The InvisibleShield will now be fully installed. Carefully peel away the top protective layer from the screen protector.
10. Final Clean-up: Use the microfiber cloth to gently press out any remaining micro-bubbles towards the edges of the screen. Wipe away any fingerprints or dust that may have accumulated during the installation process.

Image: Detailed steps for the EZ Apply installation system, illustrating how to peel, press, and insert the screen protector using the alignment tray.

Official Installation Video

Product Features & Operation

The ZAGG InvisibleShield Glass+ is designed to enhance your iPhone 15's durability and user experience:

• Ultimate Protection: Features Ion Matrix Technology, providing 3X stronger protection than traditional glass against drops, dings, and scratches.
• Total Scratch Resistance: A precision surface finishing process ensures maximum scratch resistance, protecting your screen from everyday hazards like keys.
• Clean, Smudge-Free Screen: An innovative smudge-resistant surface treatment effectively disperses fingerprint oils, keeping your screen clear and maintaining original touch sensitivity.
• Odor Fighting Treatment: Special properties inhibit the growth of odor-causing agents and guard against the degradation of the screen protector itself.
• Ultra Smooth Surface & Super Precise: Maintains the phone's original tactile familiarity and ensures precise touch response for gaming and other activities.
• Reinforced Edges: Offers unparalleled protection against chips and cracks along the edges of your screen.

Image: Visual representation of the screen protector's extreme impact protection, highlighting its superior strength and the inclusion of recycled glass.

Image: Demonstrates the super clear visibility, reinforced edges for maximum protection, and resistance to discoloration and smudges.

Image: Highlights the ultra-smooth surface, pristine glass clarity, and super precise touch response for an optimal user experience.

Image: Illustrates the smudge-free surface, where fingerprints vanish when the screen is turned on, ensuring a clean display.

Image: Emphasizes the product's environmental commitment, stating it is made with up to 30% recycled glass.

Maintenance

To ensure the longevity and clarity of your ZAGG InvisibleShield Glass+ screen protector, follow these simple maintenance tips:

• Regular Cleaning: Use the provided microfiber cloth or a similar soft, lint-free cloth to gently wipe down the screen protector daily. This will help maintain its smudge-free surface.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol, or ammonia-based solutions, as these can damage the screen protector's oleophobic coating.
• Handle with Care: While the screen protector is highly durable, avoid placing your phone face down on rough surfaces or exposing it to sharp objects unnecessarily.

Troubleshooting

If you encounter any issues during or after installation, consider the following common solutions:

• Bubbles After Installation: Small bubbles are common immediately after installation. Most will dissipate naturally within 24-48 hours. For larger bubbles, gently push them towards the nearest edge using the microfiber cloth or a credit card wrapped in the cloth.
• Dust Under the Protector: If dust particles are visible under the protector, it indicates the screen was not completely clean before application. While difficult to remove without re-application, for minor specks, you might carefully lift a corner of the protector (using a piece of tape to avoid touching the adhesive) and use the dust removal sticker to dab the dust off the screen or the adhesive side. Re-apply immediately.
• Misalignment: If the protector is significantly misaligned, it may be necessary to carefully remove it and re-apply, ensuring proper use of the EZ Apply tray for precise alignment.

For persistent issues or further assistance, please refer to the warranty and support information.

Specifications

Warranty & Support

ZAGG InvisibleShield Glass+ Screen Protectors come with a Limited Lifetime Warranty. For detailed warranty information and to register your product, please refer to the documentation included in your product packaging or visit the official ZAGG website:

zagg.com/register

Registering your product ensures you can take advantage of ZAGG's warranty program, which typically covers replacements for damaged screen protectors (shipping and handling fees may apply).