Walfront 50KG Manual Suction Cup Vacuum Lifter

1. Product Overview

The Walfront 50KG Manual Suction Cup Vacuum Lifter is a robust and practical tool designed for safely lifting and moving non-porous materials such as large glass panels, floor or ceramic tiles, and car shells. Constructed from durable aluminum alloy, this single-claw lifter features a high-abrasion rubber chassis that creates a strong vacuum seal, ensuring a secure grip for heavy-duty tasks. It is engineered for reliability and ease of use in various industrial and domestic applications.

Image: The Walfront Suction Cup Lifter, showcasing its durable aluminum alloy construction and robust design, engineered for exceptional durability and resistance to deformation.

This lifter is capable of handling horizontal loads up to approximately 50kg (110.2lbs) and vertical lifts up to 35kg (77.2lbs), making it suitable for a wide range of lifting requirements. Its design prioritizes user safety and efficiency, providing a dependable solution for material handling.

Image: Various applications of the suction cup lifter, demonstrating its use for safely lifting glass panels, floor/ceramic tiles, car shells, and other non-porous surfaces without bumps or holes.

2. Important Safety Instructions

To ensure safe operation and prevent injury or damage to the product, please adhere to the following safety guidelines:

• Inspect Before Use: Always check the suction cup and rubber chassis for any signs of damage, cracks, or wear before each use. Do not use if any part is compromised.
• Clean Surfaces: Ensure both the surface of the material to be lifted and the rubber suction cup are clean, dry, and free of dust, grease, or debris. Contaminants can compromise the vacuum seal.
• Suitable Surfaces: This lifter is designed for use on smooth, non-porous surfaces only. Do not attempt to use it on rough, textured, porous, or uneven surfaces.
• Weight Limits: Do not exceed the maximum horizontal suction capacity of 50kg (110.2lbs) or vertical lift capacity of 35kg (77.2lbs). Overloading can lead to loss of suction and material drop.
• Secure Engagement: Ensure the lever is fully engaged and the suction cup is firmly attached before attempting to lift. Test the grip by gently pulling on the handle.
• Maintain Grip: During lifting and transport, maintain a firm and steady grip on the handle. Avoid sudden movements or jerking.
• Release Carefully: When releasing the suction, do so slowly and deliberately to prevent the material from dropping unexpectedly.
• Personal Protective Equipment: Wear appropriate safety gear, such as gloves and safety footwear, especially when handling heavy or fragile materials.
• Children and Pets: Keep the suction cup lifter and materials being moved out of reach of children and pets.

3. Product Components

The Walfront Manual Suction Cup Vacuum Lifter consists of the following primary components:

• Aluminum Alloy Handle: The sturdy, ergonomic handle provides a secure grip for lifting and maneuvering.
• Lever Mechanism: A robust lever that, when pressed down, creates the vacuum seal by pulling the rubber chassis upwards.
• Rubber Suction Chassis: A high-density, abrasion-resistant rubber pad that forms the airtight seal with the surface.
• Metal Base Plate: The circular metal plate to which the rubber chassis is attached and through which the lever mechanism operates.

Image: A detailed view of the Walfront Suction Cup Lifter, highlighting its aluminum alloy handle, lever mechanism, and the robust rubber suction chassis.

4. Setup

The Walfront Suction Cup Lifter requires minimal setup. Follow these steps before first use:

1. Unpack: Carefully remove the suction cup lifter from its packaging.
2. Initial Inspection: Visually inspect the entire unit for any signs of shipping damage or manufacturing defects. Ensure the rubber suction chassis is intact and free of cuts or tears.
3. Clean the Suction Cup: Before first use, and periodically thereafter, clean the rubber suction chassis with a damp cloth to remove any dust or residue. Allow it to air dry completely.

5. Operating Instructions

Follow these steps for effective and safe operation of your suction cup lifter:

1. Prepare the Surface: Ensure the surface of the material you intend to lift is clean, dry, smooth, and non-porous. Remove any dust, dirt, moisture, or oils that could compromise the seal.
2. Position the Lifter: Place the suction cup lifter firmly onto the desired lifting point on the material. Ensure the rubber chassis is flat against the surface with no air gaps.
3. Engage the Suction: While applying downward pressure to the handle, press the lever mechanism down until it locks into place. You should feel the suction cup firmly attach to the surface.
4. Verify Suction: Gently pull on the handle to confirm that the suction cup is securely attached and the vacuum seal is strong. Do not proceed if the grip feels loose.
5. Lift and Move: Once the suction is confirmed, carefully lift the material using the handle. Maintain a steady and controlled movement.
6. Release the Material: To release the material, place it gently onto the desired destination. Then, pull the lever mechanism upwards to disengage the vacuum seal. The suction cup will detach from the surface.

Image: Demonstrating the high weight capacity, showing hands operating the suction cup lifter to effortlessly handle horizontal loads up to 50kg/110.2lbs and vertical lifts up to 35kg/77.2lbs for practical heavy-duty tasks.

6. Care and Maintenance

Proper care and maintenance will extend the lifespan of your Walfront Suction Cup Lifter:

• Cleaning: After each use, especially if used in dusty or dirty environments, wipe down the rubber suction chassis and the metal components with a clean, damp cloth. Do not use abrasive cleaners or solvents, as they can damage the rubber.
• Drying: Ensure all parts are completely dry before storage to prevent corrosion and maintain the integrity of the rubber.
• Storage: Store the suction cup lifter in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid storing it with the rubber chassis pressed against uneven surfaces, which could deform it.
• Regular Inspection: Periodically inspect the rubber suction chassis for any signs of wear, cracks, hardening, or deformation. A damaged rubber pad will compromise suction performance. Replace if necessary.
• Lubrication: The lever mechanism typically does not require lubrication. If movement becomes stiff, a very small amount of silicone-based lubricant can be applied to pivot points, avoiding contact with the rubber.

7. Troubleshooting

If you encounter issues with your suction cup lifter, refer to the following common problems and solutions:

8. Technical Specifications

Detailed specifications for the Walfront 50KG Manual Suction Cup Vacuum Lifter:

Image: A diagram illustrating the superior grip technology and reliable vacuum lift mechanism, including the chassis diameter and both horizontal and vertical suction capacities.

9. Customer Support

For any questions, concerns, or technical assistance regarding your Walfront 50KG Manual Suction Cup Vacuum Lifter, please contact Walfront customer support through the retailer's platform or visit the official Walfront store page for more information.

Walfront Store: Visit the Walfront Store on Amazon