Antetek Rocking Glider Chair Instruction Manual

1. Product Overview

The Antetek Rocking Glider Chair is designed for comfort and versatility, suitable for nurseries, living rooms, bedrooms, or waiting areas. It features a gentle rocking motion, a tall backrest, and high-density cushioning for optimal support. The chair is upholstered in soft teddy fabric and includes convenient side pockets for storage.

Key features include:

• Smooth Rocking: Curved legs with non-slip pads ensure a gentle and quiet rocking experience.
• Ergonomic Design: A tall backrest and smooth armrests provide excellent body support, complemented by a lumbar pillow for spinal alignment.
• Fabulous Comfort: High-quality teddy fabric and high-density sponge offer a soft, breathable, and comfortable seating experience.
• Stylish & Functional: Modern wingback design with side pockets for magazines, remote controls, or other small items.
• Reinforced Frame: Constructed with kiln-dried hardwood and an engineered wood frame for durability and stability, supporting up to 250 lbs.

2. Safety Information

Please read and understand all safety warnings before assembly and use.

• WARNING: This chair requires proper assembly. Do not attempt to use until fully assembled. Always follow the assembly instructions provided.
• WARNING: The maximum weight capacity of this chair is 250 lbs. Exceeding this capacity may cause instability and potential injury. Always ensure the chair is used within its weight limit.
• Keep small parts away from children during assembly to prevent choking hazards.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the chair or use it as a step stool.
• Use on a flat, stable surface to prevent tipping.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Backrest (1)
• Seat Cushion (1)
• Armrests (2)
• Rocking Base (1)
• Lumbar Pillow (1)
• Hardware Pack (screws, bolts, Allen wrench)

4. Setup and Assembly Instructions

Assembly typically takes approximately 30 minutes. It is recommended to assemble the chair with two people.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Ensure all listed package contents are present.
2. Attach Armrests to Seat: Align the pre-drilled holes on the armrests with the corresponding holes on the sides of the seat cushion. Secure them using the provided bolts and Allen wrench. Do not fully tighten yet.
3. Attach Backrest: Slide the backrest into the slots on the seat and armrests. Ensure it is fully seated. Secure with bolts, tightening them partially.
4. Attach Rocking Base: Connect the rocking base to the bottom of the assembled seat and armrest frame. Align the holes and secure with the remaining bolts.
5. Final Tightening: Once all components are loosely assembled, go back and fully tighten all bolts and screws. Do not overtighten.
6. Place Lumbar Pillow: Position the lumbar pillow for desired back support. Note: The back cushion is placed inside the bottom of the seat cushion during shipping.

This image shows the Antetek Rocking Glider Chair in a cream color, fully assembled and placed in a room. It highlights the overall design and appearance of the chair.

This image provides a detailed view of the chair's construction, showcasing the thick back cushion for comfort and the solid wood legs that form the rocking base, emphasizing durability and support.

5. Operating Instructions

The Antetek Rocking Glider Chair is designed for simple and comfortable use.

• Sitting: Gently sit into the chair, ensuring your weight is evenly distributed.
• Rocking Motion: Use your feet to gently push off the floor to initiate the rocking motion. The curved base allows for a smooth and soothing glide.
• Using Side Pockets: The side pockets on the armrests are ideal for storing small items such as books, magazines, remote controls, or baby essentials.
• Lumbar Support: Adjust the included lumbar pillow to your preferred position for optimal back support.

This diagram illustrates the smooth and gentle rocking motion of the chair, highlighting the curved base with non-slip mats that ensure stability and a quiet glide.

This image shows a woman sitting in the Antetek Rocking Glider Chair, holding a baby, demonstrating its suitability and comfort for nursing and soothing in a nursery environment.

6. Maintenance

Proper care will extend the life and appearance of your rocking glider chair.

• Cleaning: Wipe clean with a damp cloth. For tougher stains, use a mild fabric cleaner and test on an inconspicuous area first.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions, as they may damage the fabric or wood finish.
• Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary.
• Protect from Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.

7. Troubleshooting

If you encounter any issues with your Antetek Rocking Glider Chair, refer to the following common solutions:

• Chair feels wobbly: Ensure all assembly bolts are fully tightened. Check that the chair is on a flat, even surface.
• Rocking motion is not smooth: Verify that the rocking base is correctly installed and free from obstructions. Check the non-slip pads for wear or damage.
• Squeaking noises: Apply a small amount of silicone lubricant to the joints of the rocking base if persistent squeaking occurs.
• Cushion feels uncomfortable: Ensure the lumbar pillow is positioned correctly. The main back cushion is placed inside the bottom of the seat cushion during shipping; ensure it is properly adjusted.

If problems persist, please contact Antetek customer support.

8. Specifications

This image provides a comprehensive diagram of the chair's dimensions in inches, including width, depth, height, seat height, and backrest height, along with the 250 lbs weight capacity.

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Antetek directly through their official website or the retailer where the product was purchased. Please have your model number (1) and purchase date ready when contacting support.