Vigosit CPGF Cat Ears PU Leather Gaming Chair Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Vigosit CPGF Cat Ears PU Leather Gaming Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. This chair is designed for comfort and ergonomic support during extended periods of gaming or work.

2. Safety Information

• This product supports weights up to 310 pounds. Exceeding this limit may result in injury or damage to the chair.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep hands and fingers clear of moving parts during adjustment.
• Do not stand on the chair or use it as a step stool.
• Use on a flat, stable surface to prevent tipping.
• Keep away from open flames or direct heat sources.
• Children should be supervised when using the chair.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Backrest
• Seat Cushion with Footrest
• Armrests (2)
• Star Base
• Casters (5)
• Gas Lift Cylinder
• Gas Lift Cover
• Mechanism Plate
• Headrest Pillow
• Lumbar Support Pillow (Cat Paw Design)
• Cat Ear Accessories (2)
• Hardware Pack (screws, washers, Allen wrench)
• User Manual

4. Assembly Instructions

Assembly typically takes approximately 15 minutes. Follow the steps below carefully.

Step 1: Attach Casters to Base

Insert each of the five casters into the holes at the end of the star base until they click securely into place.

Image: Illustration showing how to insert casters into the chair's star base.

Step 2: Install Gas Lift and Cover

Place the gas lift cylinder into the center hole of the assembled star base. Slide the gas lift cover over the cylinder.

Step 3: Attach Mechanism Plate to Seat Cushion

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.

Step 4: Attach Armrests to Seat Cushion

Attach the armrests to the sides of the seat cushion using the designated screws. Ensure they are oriented correctly (left and right).

Step 5: Connect Seat to Gas Lift

Carefully place the assembled seat cushion onto the gas lift cylinder, ensuring it is centered and stable.

Step 6: Attach Backrest to Seat

Align the backrest with the mounting brackets on the seat cushion. Secure it using the remaining screws. Tighten all screws firmly.

Step 7: Attach Headrest and Lumbar Pillows

Attach the headrest pillow to the top of the backrest using its straps. Position the cat paw lumbar support pillow on the lower back of the chair. The cat ear accessories can be clipped onto the top of the backrest.

Image: The assembled chair with headrest and cat paw lumbar pillow in place.

5. Operating Instructions

Height Adjustment

To adjust the seat height, pull the lever located under the right side of the seat upwards. While pulling the lever, either lift your weight off the seat to raise it, or remain seated to lower it. Release the lever to lock the height.

Backrest Recline

To recline the backrest, pull the lever on the left side of the seat upwards. Lean back to the desired angle (90-155 degrees) and release the lever to lock it in place.

Rocking Function

The chair features a rocking function. To enable or disable this, use the knob located under the seat. Turn clockwise to tighten for less rocking, counter-clockwise for more rocking. The recline lever can also lock the chair in an upright position to prevent rocking.

360-Degree Swivel

The chair's base allows for a full 360-degree swivel for easy movement and access to your workspace.

Retractable Footrest

To use the footrest, pull it out from under the seat. It can be extended to provide leg support when reclining. Push it back under the seat when not in use.

Image: The Vigosit gaming chair with its footrest extended for use.

6. Features and Ergonomics

The Vigosit CPGF chair is designed with user comfort and support in mind.

• Ergonomic Design: Adjustable armrests, reclining backrest, and removable lumbar cushion offer personalized ergonomic support, promoting good posture.
• Premium Materials: Constructed with high-density foam and durable PU leather for comfort and easy cleaning. The sturdy steel frame ensures long-lasting support.
• Cat Ear Accents: Adorable, removable cat ear accessories add a unique aesthetic.
• Cat Paw Lumbar Support: A plush, soft lumbar pillow in a cat paw shape provides additional lower back support.

Image: Diagram highlighting the chair's ergonomic features, including tilt range, cushion thickness, and maximum load capacity.

7. Maintenance

• Cleaning: Wipe the PU leather surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Casters: Periodically clean hair and debris from the casters to ensure smooth rolling.
• Fasteners: Regularly check all screws and bolts and re-tighten them to maintain stability and safety.
• Pillows: The headrest and lumbar pillows can be spot cleaned as needed.

8. Troubleshooting

• Chair Sinks or Does Not Adjust Height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Chair Wobbles: Check that all screws connecting the seat, backrest, and mechanism plate are securely tightened. Ensure the star base is properly assembled and the casters are fully inserted.
• Footrest Sticks: If the footrest is difficult to extend or retract, check for any obstructions. Regular use may also help to loosen the mechanism.
• Armrests Wiggle: Re-tighten the screws securing the armrests to the chair.

9. Specifications

10. Warranty and Support

This Vigosit gaming chair comes with a 1-year warranty from the date of purchase.

For any questions, concerns, or warranty claims, please contact Vigosit customer service. Our 24/7 customer service team is available to assist you.

Contact information can typically be found on the product packaging or the official Vigosit website.