Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Lucande Sharvil Pendant Lamp, Model 9639743. This elegant pendant lamp features three white glass shades designed for E27 bulbs, suitable for living rooms and dining areas. Please read these instructions carefully before installation and retain them for future reference.
Image: The Lucande Sharvil pendant lamp featuring three white glass shades and gold-colored fittings, elegantly suspended over a dining table.
Safety Information
- Electrical Safety: Always disconnect the main power supply before installation, maintenance, or bulb replacement. Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Voltage: This lamp operates at 230V. Ensure your electrical supply matches this requirement.
- Bulb Type: Use only E27 bulbs with a maximum wattage of 15W LED per socket. Do not exceed the specified wattage.
- Protection Class: This product is rated IP20 (protection against solid objects larger than 12.5mm, no protection against water). It is designed for indoor use only. Protection Class I indicates that the product must be connected to an earth (ground) terminal.
- Handling: Handle glass components with care to prevent breakage.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
Package Contents
Please check that all components are present and undamaged before beginning installation:
- 1x Ceiling mounting bar with integrated wiring
- 3x Pendant cables with E27 lamp holders and metal fittings
- 3x White glass shades
- Mounting hardware (screws, wall plugs)
- Instruction manual
Note: E27 light bulbs are not included and must be purchased separately.
Installation Instructions
- Prepare for Installation:
- Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Unpack all components and inspect them for any damage.
- Mount the Ceiling Bar:
- Position the ceiling mounting bar (PT09) against the ceiling at your desired location. Mark the drilling points.
- Drill holes in the ceiling and insert appropriate wall plugs.
- Secure the ceiling mounting bar to the ceiling using the provided screws. Ensure it is firmly attached.
Image: Underside view of the ceiling mounting bar, illustrating the internal wiring connections and mounting points.
- Electrical Connection:
- Connect the household electrical wires to the terminals inside the ceiling mounting bar. Ensure correct polarity (Live, Neutral, Earth). The lamp is Protection Class I and requires an earth connection.
- Double-check all connections for security.
- Adjust Pendant Length (Optional):
- If desired, adjust the length of the pendant cables by carefully feeding them through the ceiling bar mechanism. Ensure all three pendants are at the desired height and evenly spaced.
Image: Dimensional drawing indicating the lamp's overall length and suspension height.
- Install Light Bulbs:
- Carefully screw E27 LED bulbs (max 15W each) into the lamp holders (PT07). Do not overtighten.
Image: Close-up of the E27 lamp holder, ready for bulb insertion.
- Attach Glass Shades:
- Carefully attach each white glass shade to its respective pendant fitting. Ensure they are securely fastened but do not apply excessive force.
Image: Detail of a single glass shade and its connection to the pendant fitting.
- Restore Power:
- Once all steps are complete and connections are secure, restore power at the circuit breaker.
Operating Instructions
The Lucande Sharvil Pendant Lamp is operated via a standard wall switch connected to your household electrical circuit. There are no integrated controls on the lamp itself.
- Turning On/Off: Use the wall switch to turn the lamp on or off.
- Bulb Replacement: To replace a bulb, first ensure the power is off at the main switch. Allow the bulb to cool completely before unscrewing it from the E27 socket. Insert a new E27 LED bulb (max 15W) and restore power.
Maintenance
- Cleaning: To clean the lamp, ensure the power is disconnected. Use a soft, dry, lint-free cloth to wipe the glass shades and metal fittings. Do not use water, abrasive cleaners, or chemical solvents, as these can damage the finish or electrical components.
- Inspection: Periodically check the lamp for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power supply Faulty bulb Loose wiring connection | Check circuit breaker and wall switch Replace bulb (With power off) Check wiring connections in the ceiling bar |
| Light flickers | Loose bulb Incompatible dimmer (if applicable) Faulty bulb | Tighten bulb Ensure bulbs are dimmable and compatible with your dimmer switch Replace bulb |
| Glass shade is loose | Shade not properly secured | Carefully re-secure the glass shade to its fitting |
If you experience any issues not listed here or if the problem persists after attempting the solutions, please contact customer support.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 9639743 |
| Brand | Lucande |
| Material | Glass, Metal |
| Color | White (glass), Matt Nickel (fittings) |
| Dimensions (Length) | 97 cm (ceiling bar) |
| Lamp Holder | E27 |
| Number of Lights | 3 |
| Max Wattage per Bulb | 15W LED |
| Operating Voltage | 230V |
| Protection Class | I |
| IP Rating | IP20 |
| Item Weight | 3.58 kg |
Warranty Information
Lucande products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions regarding the installation, operation, or maintenance of your Lucande Sharvil Pendant Lamp, or if you encounter any issues, please contact the seller directly through your Amazon retailer profile. Provide your model number (9639743) and a detailed description of the issue for efficient assistance.