EWORK EK-01GY

EWORK 21V Cordless Leaf Blower Instruction Manual

Model: EK-01GY

1. Introduction

Thank you for choosing the EWORK 21V Cordless Leaf Blower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

EWORK 21V Cordless Leaf Blower with two batteries

Image 1.1: EWORK 21V Cordless Leaf Blower with included batteries.

2. Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep children and bystanders away while operating the tool. Wear appropriate personal protective equipment, including eye protection, hearing protection, and sturdy footwear.

  • Ensure the battery is fully charged before use.
  • Do not operate the blower in wet conditions.
  • Keep all body parts away from openings and moving parts.
  • Use only EWORK approved batteries and chargers.

3. Package Contents

Verify that all items are present in the package:

  • 1 x EWORK 21V Cordless Leaf Blower
  • 2 x 3.0Ah Lithium-Ion Batteries
  • 1 x Fast Charger
  • 1 x Blower Tube
  • 1 x User Manual (this document)
Components of the EWORK 21V Cordless Leaf Blower kit, including the blower unit, two batteries, charger, and blower tube.

Image 3.1: All components included in the EWORK 21V Cordless Leaf Blower package.

4. Setup

4.1 Attaching the Blower Tube

  1. Align the blower tube with the air outlet on the main blower unit.
  2. Twist the tube clockwise until it locks securely into place.

4.2 Inserting the Battery

  1. Ensure the battery is fully charged (refer to Section 5).
  2. Slide the battery into the battery slot at the base of the blower handle until it clicks into place.
  3. To remove, press the battery release button and slide the battery out.

5. Charging the Battery

The EWORK 21V Cordless Leaf Blower includes two 3.0Ah Li-ion batteries and a fast charger. Fully charge batteries before initial use.

  1. Connect the fast charger to a standard power outlet.
  2. Slide the battery onto the charger. The LED indicator on the charger will turn red, indicating charging is in progress.
  3. When charging is complete, the LED indicator will turn green. A 3.0Ah battery typically charges in approximately 1.5 hours.
  4. Remove the battery from the charger once fully charged.
Two EWORK 21V 3.0Ah Lithium-Ion batteries, one inserted into a fast charger with a green indicator light, and the other next to it.

Image 5.1: EWORK 21V 3.0Ah Lithium-Ion batteries and fast charger.

The batteries are designed to retain 80% capacity after 800 cycles, offering extended lifespan. Expected runtime is up to 25 minutes in Turbo mode and 45 minutes on Low Speed, depending on operating conditions.

Diagram showing the fast charger with red and green LED indicators for charging status, along with overheat and overcharge protection icons.

Image 5.2: Fast charging features with LED indicators and protection.

6. Operating Instructions

6.1 Powering On/Off and Variable Speed

To power on the leaf blower, press the variable-speed trigger. The blower speed is controlled by the amount of pressure applied to the trigger. Release the trigger to turn off the blower.

6.2 Activating Turbo Mode

For maximum power, press the 'Turbo' button located on the top of the handle while operating the blower. This activates the turbo mode, providing up to 550 CFM (Cubic Feet per Minute) and 150 MPH (Miles Per Hour) for tougher debris.

Close-up of the EWORK leaf blower handle showing the variable-speed trigger and the 'Turbo' mode button.

Image 6.1: Variable-speed trigger and Turbo mode button.

Graphic illustrating the EWORK leaf blower's performance: Max Air Volume 550 CFM (Turbo Mode) / 400 CFM (Variable-Speed) and Max Air Speed 150 MPH (Turbo Mode) / 120 MPH (Variable-Speed).

Image 6.2: Air volume and speed specifications for variable and turbo modes.

6.3 Usage Scenarios

This lightweight and cordless leaf blower is ideal for clearing leaves, grass clippings, dust, and other light debris from various surfaces such as yards, sidewalks, driveways, patios, and parks.

A person using the EWORK leaf blower to clear leaves from a lawn, highlighting its lightweight and cordless design.

Image 6.3: Demonstrating the lightweight and cordless operation of the leaf blower.

Close-up of the EWORK leaf blower with an overlay graphic indicating 'Overload Protection' via an internal chip.

Image 6.4: The leaf blower features intelligent overload protection for motor and battery longevity.

6.4 Official Product Video

Video 6.1: An official EWORK video demonstrating the cordless leaf blower in various outdoor settings, highlighting its ease of use and effectiveness in clearing debris.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your EWORK leaf blower.

  • Cleaning: After each use, wipe down the exterior of the blower with a damp cloth. Ensure air vents are clear of debris to prevent overheating.
  • Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
  • Storage: Detach the blower tube and battery for compact storage. Store the unit in a dry, secure location.

8. Troubleshooting

ProblemPossible CauseSolution
Blower does not startBattery not inserted correctly or dischargedEnsure battery is fully inserted and charged
Reduced air flowAir intake/outlet blockedClear any debris from air vents and blower tube
Short runtimeBattery not fully charged or operating in Turbo mode continuouslyFully charge battery; use Turbo mode only when necessary

9. Specifications

FeatureSpecification
BrandEWORK
Model NumberEK-01GY
Power SourceBattery Powered
Voltage21 Volts (DC)
Max Air Volume550 CFM (Turbo Mode)
Max Air Speed150 MPH (Turbo Mode)
Item Weight3.6 Pounds
Product Dimensions29.9"L x 4.9"W x 9.8"H
Included Components1 x Cordless Leaf Blower, 2 x 3.0Ah Battery, Charger, User Manual
Special FeaturesBattery Charge Indicator, Compact Design, Lightweight, Overload Protection

10. Warranty and Support

EWORK provides a 365-day warranty for this product. A 30-day return policy is also available. For any inquiries or support, please contact EWORK customer service. We aim to provide a quick reply within 24 hours.

  • Warranty: 365 Days
  • Return Policy: 30 Days
  • Customer Support: 24-hour quick reply

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.