Product Overview
The Puluomis Smart Bidet Toilet Seat offers advanced hygiene and comfort features for an enhanced bathroom experience. This elongated bidet seat includes fully automatic adjustments for water, seat, and air temperatures, a self-cleaning stainless steel nozzle, and convenient wireless remote control. It is designed for energy efficiency and features soft LED night lighting for ease of use in low light conditions.
Image: Front view of the Puluomis Smart Bidet Toilet Seat with its wireless remote control. The seat is white and has a sleek, modern design.
Important Safety Precautions
- Electrical Safety: Ensure the product is properly grounded. Do not plug in the unit if it is not connected to a water supply, as this can cause the heating element to dry-fire and fail.
- Water Supply: Always ensure a stable water supply before operating the bidet seat.
- Temperature Settings: Be mindful of adjustable temperature settings for water, seat, and air to prevent discomfort or burns.
- Cleaning: Use only mild, non-abrasive cleaners. Do not immerse the unit in water.
Setup and Installation
Before installation, ensure your toilet is compatible with the elongated V-shape design of this bidet seat. Refer to the dimensions provided below.
Image: Top and side view of the bidet toilet seat showing its dimensions: 20.1 inches in length and 15.4 inches in width. The side profile shows a height of 5.5 inches.
Water Connection
The bidet seat requires a connection to your toilet's water supply. A T-valve is typically used to divert water to the bidet while maintaining supply to the toilet tank.
Image: Diagram illustrating the connection of the T-valve. It shows connecting to the indoor water inlet pipe, the toilet lid inlet, and the toilet flush tank. A black rubber mat is also shown for proper sealing.
- Turn off the water supply to your toilet.
- Flush the toilet to empty the tank.
- Disconnect the existing water supply hose from the toilet tank.
- Install the provided T-valve between the toilet tank fill valve and the water supply hose. Ensure the black rubber mat is properly seated for a watertight seal.
- Connect the bidet seat's water supply hose to the T-valve.
- Securely attach the bidet seat to your toilet bowl using the provided mounting hardware.
- Turn on the water supply and check for leaks.
- Plug the bidet seat into a grounded electrical outlet.
Operating Instructions
The Puluomis Smart Bidet Toilet Seat is operated primarily via its wireless remote control. Familiarize yourself with the remote's functions for optimal use.
Image: Detailed layout of the wireless remote control for the bidet seat, showing various buttons for power, wash functions, temperature adjustments, and other settings.
Remote Control Functions:
- On/Off: Powers the unit on or off.
- Water Temp: Adjusts the temperature of the wash water.
- Wind Temp: Adjusts the temperature of the warm air dryer.
- Seat Temp: Adjusts the temperature of the heated seat.
- Turbo Wash: Provides a strong, concentrated wash.
- Child Cleaning: Gentle wash setting suitable for children.
- Rear Cleaning: Standard posterior wash.
- Female Cleaning: Gentle anterior wash.
- Warm Air Dryer: Activates the warm air drying function.
- Night Lighting: Toggles the soft LED night light.
- ECO (Smart Power Saving): Activates energy-saving mode. Note: Heating functions may be reduced or off in ECO mode.
- Nozzle Position: Adjusts the forward/backward position of the nozzle.
- Water Pressure: Adjusts the intensity of the water spray.
- Stop: Halts any active wash or drying cycle.
Key Features in Operation:
Image: Illustration showing the heated seat function with adjustable temperature and the warm air dryer with adjustable temperature, providing comfort after use.
Image: The bidet seat with its soft blue LED night light illuminated, providing visibility in the dark without needing to turn on bright bathroom lights.
Maintenance and Cleaning
Regular maintenance ensures the longevity and hygienic operation of your Puluomis Smart Bidet Toilet Seat.
Nozzle Cleaning:
The stainless steel nozzle features a self-cleaning function. Activate this function periodically to maintain hygiene.
Image: Close-up view of the stainless steel nozzle, illustrating its capabilities for rear cleaning, female cleaning, and self-cleaning with water spray.
General Cleaning:
- Unplug the unit from the power outlet before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner.
- Do not use harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
- Ensure no water enters the electrical components.
- For thorough cleaning, the seat may be detached from the mounting plate (refer to installation guide for detachment steps).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water spray or weak spray. | Water supply turned off; clogged nozzle; low water pressure. | Ensure water supply valve is fully open. Activate nozzle self-cleaning. Check household water pressure. |
| No heat from seat or water. | Unit in ECO mode; power issue; heating element failure. | Disable ECO mode. Check power connection and circuit breaker. Ensure unit is connected to water supply before plugging in. |
| Remote control not responding. | Dead batteries; remote out of range; interference. | Replace remote control batteries. Ensure remote is within operating range of the bidet seat. Remove any obstructions. |
| Leaking from connections. | Loose connections; damaged seals. | Tighten all water connections. Check rubber gaskets and seals for damage and replace if necessary. |
If troubleshooting steps do not resolve the issue, please contact customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Puluomis |
| Model Number | USBA20070 |
| Color | White |
| Material | Stainless Steel (Nozzle) |
| Style/Shape | V Shape (Elongated) |
| Product Dimensions (L x W) | 20.1" x 15.4" |
| Item Weight | 11.58 pounds |
| Power Source | Corded Electric (Requires outlet) |
| Control Type | Wireless Remote Control |
| Special Features | Heated Seat, Warm Water Wash, Warm Air Dryer, Night Lighting, Self-Cleaning Nozzle, Power Saving Mode |
Warranty and Support
Information regarding product warranty and specific customer support contact details is not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for warranty terms and customer service contact information.
For general inquiries or assistance, you may visit the Puluomis Store on Amazon.