Introduction
This manual provides essential information for the safe and effective use of your Night Buddy LED Headlamp + Lantern. Please read these instructions thoroughly before operating the device and retain them for future reference.
The Night Buddy Headlamp + Lantern is a versatile lighting solution designed for various activities, including camping, hiking, outdoor work, and emergency situations. It features multiple lighting modes, a rechargeable battery, and a comfortable, adjustable design.
What's in the Box
- Night Buddy LED Headlamp + Lantern
- Charging Cable
Setup
1. Initial Charging
Before first use, fully charge the device. Locate the USB-C charging port on the side of the headlamp module. Open the rubber flap and connect the provided charging cable to a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
The charging indicator light will show the charging status. Ensure the flap is securely closed after charging to maintain water resistance.
2. Adjusting the Headband
The headlamp features an elastic and adjustable headband for a secure and comfortable fit. Adjust the strap length using the buckles on either side until it fits snugly around your head or over a helmet.
Image: Night Buddy LED Headlamp and Lantern, showing both devices and the headlamp's flexible design.
Operating Instructions
Headlamp Operation
The headlamp offers 5 lighting modes and a motion sensor function.
- Power Button: Press the power button (marked with a power symbol) on the side of the headlamp module to cycle through the main lighting modes:
- High Brightness (230° LED strip)
- Low Brightness (230° LED strip)
- Red Light Mode (230° LED strip)
- Spotlight Mode (Side LED)
- Off
- Motion Sensor: Press the motion sensor button (marked with a wave symbol) to activate the motion sensor function. Once activated, you can wave your hand in front of the headlamp to turn the light on or off without pressing the power button. This feature works with all lighting modes.
Image: Diagram illustrating the Night Buddy Headlamp's features, including the 230° LED light, 5 lighting modes, easy motion sensor, fast USB charger, waterproof design, and adjustable headband.
Lantern Operation
The accompanying lantern provides 360-degree illumination and additional features.
- Powering On/Off: Extend the lantern body to turn it on. Collapse it to turn it off.
- Light Modes: The lantern typically offers multiple brightness settings and a red light mode. Cycle through these by pressing the power button on the lantern.
- Spotlight: A dedicated spotlight function is available for focused illumination.
- Magnetized Base: The lantern features a magnetized base for hands-free placement on metallic surfaces.
Image: Diagram illustrating the Night Buddy Lantern's features, including bright 360-degree light, collapsible design, waterproof rating, strong magnet at the bottom, USB rechargeable, strong alloy shell, easy to carry, red light mode, spotlight mode, and adjustable brightness.
Official Product Video
Video: An official product video from NightBuddy showcasing the features and use cases of the Night Buddy Headlamp.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the headlamp and lantern in a cool, dry place away from direct sunlight when not in use.
- Battery Care: For optimal battery life, charge the device regularly, even if not in frequent use. Avoid fully depleting the battery for extended periods.
Troubleshooting
- Device not turning on: Ensure the battery is fully charged.
- Motion sensor not responding: Check if the motion sensor function is activated. Ensure there are no obstructions in front of the sensor.
- Dimming light: Recharge the battery.
Specifications
| Feature | Specification |
|---|---|
| Brand | NightBuddy |
| Model Number | 2 |
| Special Feature | Durable, Rechargeable LS02 |
| Power Source | Battery Powered |
| Light Source Type | LED |
| Material | Rubber |
| White Brightness | 350 Lumens |
| Product Dimensions | 3.98"D x 2.44"W x 1.57"H |
| Item Weight | 1.06 Pounds |
| Water Resistance Level | Not Water Resistant |
| Battery Cell Composition | Lithium Ion |
| Beam Angle | 230 Degrees |
Safety Information
- Do not look directly into the LED light to avoid eye strain or damage.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the device. This may void the warranty and pose a safety risk.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- This device is not water resistant. Avoid exposure to water or moisture.
Warranty and Support
For warranty information or product support, please contact NightBuddy customer service directly. Refer to the product packaging or the official NightBuddy website for contact details.
