WSDCAM USB Rechargeable Bike Alarm Instruction Manual

1. Product Overview

The WSDCAM USB Rechargeable Bike Alarm is a versatile anti-theft security system designed for various vehicles including bikes, electric bikes, motorcycles, scooters, cars, and trailers. It features a loud 110dB alarm, adjustable sensitivity, and remote control operation for enhanced security and convenience.

Image: The WSDCAM bike alarm unit and its accompanying remote control. The alarm unit is black and octagonal, with a speaker grille on top and a USB-C charging port visible. The remote control is black with four grey buttons: lock, unlock, bell, and a red alarm button.

2. Key Features

• 110dB Loud Alarm: Emits a powerful 110-decibel sound to deter potential thieves.
• Adjustable Volume: Offers 3 levels of adjustable volume to suit different environments and preferences.
• Adjustable Sensitivity: Provides 7 levels of sensitivity, ranging from a gentle touch to a strong impact, allowing customization based on security needs.
• Wireless Remote Control: Operates wirelessly with a remote control, offering a strong wireless range of up to 100 meters. Includes a vehicle search function and 3 selectable bell sounds.
• USB-C Rechargeable Battery: Powered by a built-in 4.2V 700mAh lithium battery, rechargeable via USB-C. A full charge (approx. 3 hours) can last 1-3 months depending on usage frequency.
• IP65 Waterproof: Designed with an IP65 rating, making it suitable for outdoor use and resistant to dust and water splashes.
• Multiple Installation Methods: Comes with a mounting bracket, cable ties, and double-sided tape for flexible installation on various objects.
• Multi-Purpose Application: Suitable for a wide range of applications including bikes, electric bikes, motorcycles, mopeds, scooters, cars, trailers, luggage, doors, and windows.

Image: Illustration showing the WSDCAM bike alarm with a graphic indicating a 110dB loud alarm and three adjustable volume levels. A thief is shown attempting to steal a bike, highlighting the alarm's purpose.

Image: The WSDCAM alarm unit demonstrating its 7 levels of adjustable sensitivity, ranging from "gently touch" to "push/beat." A bar graph illustrates the increasing sensitivity levels.

3. Package Contents

Please verify that all items are present in the package:

• WSDCAM Bike Alarm Unit
• Remote Control
• Mounting Bracket
• Cable Ties (Zip Ties)
• Double-sided Tape
• USB-C Charging Cable
• User Manual (this document)

4. Setup and Installation

4.1 Charging the Alarm Unit

Before first use, fully charge the alarm unit. The unit is powered by a built-in rechargeable lithium battery.

1. Locate the USB-C charging port on the alarm unit.
2. Connect the provided USB-C charging cable to the alarm unit.
3. Connect the other end of the USB-C cable to a DC5V power adapter (not included) or a compatible USB power source.
4. The charging indicator light will illuminate during charging. Once fully charged (approximately 3 hours), the indicator light will change or turn off.

Note: A full charge can provide 1 to 3 months of operation, depending on the frequency of use.

Image: The WSDCAM alarm unit being charged via a USB-C cable connected to a wall adapter. Text indicates "700mAh Rechargeable Bike Alarm" and "Work Time: 1~3 Months, Standby Time: 6 Months." A charging indicator is also shown.

4.2 Installation Methods

The WSDCAM alarm offers three primary installation methods to suit various mounting surfaces and preferences:

1. Bracket Installation:

   This method is ideal for handlebars, seat posts, or other cylindrical objects. It allows for easy removal and re-installation.

   • Attach the mounting bracket to the desired location using the provided screws. Ensure it is securely fastened.
   • Align the screw holes on the alarm unit with the bracket.
   • Twist the alarm unit onto the bracket until it locks securely in place.
2. Zip Ties Installation:

   Suitable for irregular mounting objects or areas where a bracket cannot be used.

   • Position the alarm unit on the desired surface.
   • Thread the provided cable ties through the designated slots on the alarm unit and around the mounting object.
   • Pull the zip ties tight to secure the alarm unit firmly. Trim any excess tie length.
3. Double-sided Tape Installation:

   Best for flat, clean surfaces where a discreet or permanent attachment is desired.

   • Clean the mounting surface thoroughly to ensure it is free of dust and grease.
   • Peel off one side of the protective backing from the double-sided tape and apply it to the back of the alarm unit.
   • Peel off the remaining protective backing and firmly press the alarm unit onto the desired surface for at least 30 seconds.

Image: A visual representation of the three installation methods: Zip ties installation (on a bike seat post), Bracket installation (on a bike frame), and Double-sided tape installation (on a flat surface). Each method is clearly labeled.

5. Operating Instructions

5.1 Remote Control Functions

The remote control allows for convenient operation of the alarm system from a distance.

5.2 Adjusting Sensitivity

The alarm has 7 levels of adjustable sensitivity. Higher sensitivity means the alarm will trigger with less movement.

1. Ensure the alarm is disarmed.
2. Press and hold the 🎶 (Bell) button on the remote control until you hear a "Di" sound.
3. Each subsequent press of the 🎶 (Bell) button will cycle through the 7 sensitivity levels, indicated by different "Di" sounds (e.g., Di, Di-Di, Di-Di-Di, etc.).
4. Once you reach the desired sensitivity level, stop pressing the button. The alarm will automatically save the setting after a few seconds of inactivity.

5.3 Adjusting Volume

The alarm has 3 levels of adjustable volume (Low, Medium, High).

1. Ensure the alarm is disarmed.
2. Press and hold the 🔓 (Unlock) button on the remote control until you hear a "Di" sound.
3. Each subsequent press of the 🔓 (Unlock) button will cycle through the 3 volume levels.
4. Once you reach the desired volume level, stop pressing the button. The alarm will automatically save the setting after a few seconds of inactivity.

6. Maintenance

• Recharging: Recharge the alarm unit when the battery is low. A low battery indicator may be present (refer to product specifications for details). Use only the provided USB-C cable and a DC5V power adapter for charging.
• Cleaning: Wipe the alarm unit and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Water Resistance: The alarm unit is IP65 waterproof, meaning it is protected against dust ingress and low-pressure water jets from any direction. While suitable for outdoor use, avoid submerging the unit in water.
• Storage: When not in use for extended periods, store the alarm in a cool, dry place. It is recommended to charge the battery periodically to maintain its health.

Image: The WSDCAM alarm unit covered in water droplets, illustrating its IP65 waterproof capability. This indicates its suitability for outdoor environments.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or contact WSDCAM directly through their official channels. Typically, warranty details and support contacts are provided by the manufacturer or seller at the time of purchase.

You may also visit the official WSDCAM store on Amazon for additional product information and support resources: WSDCAM Amazon Store