Introduction
The Leviton DT230-1LW Countdown Timer Switch is designed to automate the operation of household lights, bathroom exhaust fans, and motors. It features preset time options and a manual off button, providing convenient control and energy savings. This switch is compatible with various load types, including LED/CFL, Incandescent/Halogen, MLV/ELV/Fluorescent, and fan/motor loads. It supports single-pole installations and can be configured for multi-way or multi-timer applications with additional compatible devices.
Safety Information
WARNING: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with national and local electrical codes.
- Always disconnect power before installing or servicing.
- Use this device with copper or copper-clad wire only.
- Do not use to control lights if it is the only light source in the area.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 Warning).
What's in the Box
- One DT230-1LW Leviton Decora 20 Amp, 30-Minute Countdown Timer Switch, White
Product Overview
The Leviton DT230-1LW Countdown Timer Switch features a clean, modern design with multiple buttons for time selection and control. It includes a removable faceplate for easy color changes and a locator LED that illuminates when the switch is off, aiding visibility in low light conditions.
Figure 1: Front view of the Leviton DT230 Countdown Switch, highlighting buttons, removable faceplate, and LED indicator.
Figure 2: The Leviton DT230-1LW Countdown Timer Switch.
Video 1: A hands-on demonstration of the physical design and features of the Leviton Countdown Timer Switch, highlighting its construction and button layout.
Installation
The DT230-1LW switch features a shallow design for easy fitting into standard wallboxes. A neutral wire is required for installation. The switch supports single-pole, multi-way (with a DD0SR Switch Companion), or multi-timer (using two DT230 Countdown Timers) configurations.
Figure 3: Rear view of the switch, indicating wiring terminals and shallow depth for installation.
Figure 4: Wiring diagrams for Single Pole, Multi-Location, and Multi-Timer applications.
Video 2: Practical wiring tips and a demonstration of the installed appearance and functionality of the Leviton Countdown Timer Switch.
Video 3: A detailed hands-on demonstration of the wiring process for the Leviton Countdown Timer Switch.
Operation
The countdown timer switch provides four preset time options: 5, 10, 15, and 30 minutes. Pressing any of these buttons will activate the connected device for the selected duration. The device will automatically turn off once the time expires. A dedicated manual off button is also available.
- To Turn On and Set Timer: Press the desired time button (5M, 10M, 15M, or 30M). The corresponding LED indicator will illuminate.
- To Change Timer During Operation: Press a different time button. The new time will be set, and the countdown will restart from that duration.
- To Turn Off Manually: Press the bottom-most button (labeled 'OFF' or similar, typically the lowest button without a time value).
- Locator LED: A small LED light at the bottom of the switch illuminates when the switch is off, making it easy to locate in the dark.
Video 4: A demonstration of the tactile feel and responsiveness of the timer buttons on the Leviton Countdown Switch, showing how to select different time presets.
Maintenance
To maintain the appearance and functionality of your Leviton Countdown Timer Switch, follow these simple guidelines:
- Cleaning: Clean the device with a damp cloth and mild soap. Do not use chemical cleaners, including foggers, sprays, or other types of atomized cleaners.
- Faceplate Customization: The switch's appearance can be customized by changing the faceplate. DTKIT faceplates are available in various colors (white, ivory, light almond, gray, black, and brown) and are sold separately.
Figure 5: Instructions for changing the faceplate color using DTKIT faceplates.
Troubleshooting
If you encounter issues with your Leviton Countdown Timer Switch, consider the following:
- No Power: Ensure the circuit breaker supplying power to the switch is in the ON position. Verify all wiring connections are secure and correct according to the installation instructions.
- Timer Not Functioning: Confirm that the neutral wire is properly connected, as it is required for this model. Check that the load connected to the switch is within the specified wattage and amperage limits.
- Intermittent Operation: Inspect wiring for loose connections. Ensure the device is not exposed to excessive heat or moisture.
Specifications
| Specification | Value |
|---|---|
| Model Number | DT230-1LW |
| Operation Mode | Manual |
| Current Rating | 20 Amps |
| Operating Voltage | 120 Volts (AC) |
| Contact Type | Mechanical |
| Connector Type | Leads |
| Terminal | Wire Leads |
| Item Dimensions (L x W x H) | 4.13 x 1.73 x 1.34 inches |
| Circuit Type | Single Pole, 3-way, multi-timer |
| Actuator Type | Push Button |
| Contact Material | Silver |
| Number of Positions | 5 |
| Controller Type | Timer Switch |
| Control Method | Touch |
| Color | White |
| Wattage | 1800 watts |
| Item Weight | 3.84 ounces |
Figure 6: Detailed dimensions of the Leviton DT230-1LW Countdown Timer Switch.
Warranty and Support
The Leviton DT230-1LW Countdown Timer Switch is backed by a 5-year warranty. For technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact Leviton customer support directly. Refer to the packaging or the official Leviton website for the most current contact information.