Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your LEM Products 15" Freezer Paper Cutter. Designed for efficiency and durability, this steel cutter helps streamline the process of wrapping and preserving meat, preventing waste and ensuring optimal protection.
Product Overview
The LEM Products 15" Freezer Paper Cutter is constructed from steel with a gray finish, featuring a spring-engaged steel bar cutting edge for consistent performance. It is designed to accommodate 15-inch paper rolls, including both 450-foot and 1100-foot sizes. This unit comes with a 450-foot roll of 15" poly-coated freezer paper, rated for 6-9 months of protection.
Image: The LEM Products 15" Freezer Paper Cutter with a roll of paper, ready for use. This image highlights the cutter's design and its primary function.
Key Features:
- Durable Construction: Made of steel with a gray finish and a spring-engaged steel bar cutting edge.
- Versatile Compatibility: Accommodates 15" paper rolls, including 450' and 1100' lengths.
- Flexible Placement: Can be used on a countertop, under a counter, or mounted on a wall (mounting hardware not included).
- Included Paper: Comes with one 450' roll of 15" poly-coated freezer paper.
Setup
The LEM Products 15" Freezer Paper Cutter offers flexible installation options to suit your workspace. Choose the most convenient location for your meat wrapping and storing process.
Installation Options:
- Countertop Use: Simply place the cutter on a stable, flat surface.
- Under-Counter Placement: Position the cutter beneath a counter for easy access and space saving.
- Wall Mounting: The cutter can be mounted on a wall for vertical dispensing. Note: Mounting hardware is not included and must be purchased separately based on your wall type.
Loading the Paper Roll:
- Ensure the cutter is stable in your chosen location.
- Lift the spring-engaged cutting bar.
- Insert the 15" freezer paper roll onto the spindle, ensuring the paper feeds from the top and over the cutting bar.
- Lower the cutting bar back into place, securing the paper roll.
Image: A close-up view of the cutter's sturdy design, showing the spring-engaged steel bar cutting edge. This illustrates the mechanism for holding and cutting the paper.
Operating Instructions
Using the LEM Products 15" Freezer Paper Cutter is straightforward, allowing for efficient and precise cuts of freezer paper.
- Pull Paper: Gently pull the desired length of freezer paper from the roll, extending it over the cutting bar.
- Apply Pressure: With one hand, hold the paper firmly against the cutting bar.
- Cut Paper: Use your other hand to press down on the cutting bar, applying even pressure across the width of the paper. The spring-engaged steel blade will cleanly cut the paper.
- Remove Cut Piece: Once cut, remove the piece of freezer paper for wrapping.
The design allows for one-handed operation, making your meat packaging process more efficient.
Image: A raw steak placed on a sheet of freezer paper, demonstrating the intended use for meat preservation. This image emphasizes the heavy-weight coverage provided by the paper.
Maintenance
To ensure the longevity and optimal performance of your freezer paper cutter, follow these simple maintenance guidelines:
- Cleaning: Periodically wipe down the steel frame and cutting bar with a damp cloth to remove any dust or debris. Ensure the unit is dry before next use.
- Blade Inspection: Inspect the cutting edge for any signs of wear or damage. While designed for durability, a clean blade ensures smooth cuts.
- Storage: Store the cutter in a dry environment to prevent rust or corrosion, especially if not in frequent use.
Troubleshooting
If you encounter any issues with your LEM Products 15" Freezer Paper Cutter, consider the following common solutions:
- Uneven Cuts: Ensure the paper is pulled straight and held firmly against the cutting bar across its entire width. Check that the cutting bar is properly seated.
- Difficulty Cutting: Verify that the paper roll is correctly installed and feeding smoothly. Ensure no foreign objects are obstructing the cutting mechanism.
- Paper Jams: If paper jams, carefully lift the cutting bar and remove any crumpled paper. Re-thread the paper roll.
For persistent issues, refer to the warranty and support section for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | W035B |
| Material | Steel |
| Product Dimensions | 15 x 15 x 0.04 inches |
| Item Weight | 10.9 Pounds |
| Compatible Paper Roll Width | 15 inches |
| Compatible Paper Roll Lengths | 450' and 1100' |
| Included Paper Roll | One 450' roll of 15" poly-coated freezer paper |
| Recommended Uses | Food Preservation, Food Storage |
Image: A visual representation showing the two compatible paper roll sizes (450' and 1100') that can be used with this cutter.
Warranty and Support
LEM Products stands behind its products with comprehensive support:
- Warranty: A one-year factory warranty covers the freezer paper cutter.
- Customer Support: Lifetime customer support is available for any questions or assistance you may need.
- Replacement Parts: Replacement parts are available for a wide variety of LEM Products.
For warranty claims or technical assistance, please contact LEM Products customer service.
