MCombo 7040

MCombo Power Lift Recliner Chair Model 7040 User Manual

Your Guide to Assembly, Operation, and Care

1. Introduction

Thank you for choosing the MCombo Power Lift Recliner Chair Model 7040. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read all instructions carefully before use and retain this manual for future reference.

The MCombo Power Lift Recliner Chair is designed to provide comfort and assistance, featuring a power lift mechanism, heat and massage functions, USB ports, and convenient cup holders. It is constructed with FSC certified wood and CertiPUR-US certified foam for quality and safety.

MCombo Power Lift Recliner Chair 7040 in black faux leather

Image 1.1: Front view of the MCombo Power Lift Recliner Chair 7040.

2. Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

  • Keep out of reach of children.
  • Avoid contact with skin and eyes if any internal components are exposed.
  • If ingested, seek medical help immediately.
  • Consult your doctor before using this product, especially if you have pre-existing medical conditions.
  • Ensure all electrical connections are secure and away from liquids.
  • Do not allow pets to chew on electrical cords or components.
  • Do not stand on the footrest or armrests.
  • Ensure adequate clearance around the chair when reclining or lifting to prevent obstruction or damage.
  • Maximum weight recommendation: 350 pounds. Do not exceed this limit.

3. Package Contents

Your MCombo Power Lift Recliner Chair Model 7040 is shipped in two boxes. Please verify that all components are present before beginning assembly.

  • Box 1: Base, Right armrest, Accessories box, Instruction manual
  • Box 2: Backrest, Left armrest
Diagram showing recliner parts packed in two boxes

Image 3.1: Illustration of recliner components distributed in two shipping boxes.

4. Setup and Assembly

Assembly typically takes approximately 20 minutes for a novice and requires no additional tools. It is recommended to have two people for easier assembly.

  1. Unpack Components: Carefully remove all parts from both boxes. Place them on a soft, clean surface to prevent damage.
  2. Attach Armrests: Slide the left and right armrests onto the base of the chair. Ensure they are securely seated.
  3. Connect Wiring: Locate the electrical wires extending from the base and armrests. Connect the corresponding wires.
  4. Attach Backrest: Slide the backrest onto the main chair base. Ensure it clicks into place securely. Connect any remaining electrical wires from the backrest to the main unit.
  5. Power Connection: Plug the power cord into a wall outlet.
Diagram showing how to attach the backrest to the recliner base

Image 4.1: Illustration of attaching the backrest to the chair base during assembly.

5. Operating Instructions

Your MCombo Power Lift Recliner Chair is operated using a two-button remote control.

5.1 Power Lift Assistance

The counter-balanced lift mechanism, powered by a TUV certified actuator, gently pushes the entire chair upwards. This assists users in standing up easily without straining the back or knees.

  • To lift the chair: Press and hold the UP arrow button on the remote control. The chair will slowly tilt forward and rise. Release the button when you reach the desired height or standing position.
  • To recline the chair: Press and hold the DOWN arrow button on the remote control. The chair will smoothly recline backward and the footrest will extend. Release the button when you reach your preferred reclining position.
Remote control with up and down arrows for lift and recline functions

Image 5.1: The two-button remote control for operating the lift and recline functions.

Diagram showing the chair in UP, TV, and Reclined positions

Image 5.2: The chair's various positions: upright (UP), TV viewing, and fully reclined.

5.2 Lumbar Heat & Full-Body Vibration

The chair features 8 vibration nodes and a lumbar heating zone for personalized relaxation. These functions operate independently.

  • Vibration Massage: The massage function offers 5 modes and 2 intensity levels. Use the dedicated massage remote to select your preferred settings.
  • Lumbar Heat: Activate the heating function for warmth in the lumbar area.
  • Auto-Off Timer: Both heat and vibration functions include 15, 30, and 60-minute auto-off timers for safety and convenience.
Massage and heat remote control with various settings

Image 5.3: The remote control for activating and adjusting massage and heat functions.

Diagram showing the location of 8 vibration nodes and lumbar heating zone

Image 5.4: Overview of the chair's massage and heating zones.

6. Convenience Features

The MCombo Power Lift Recliner Chair is equipped with several features for enhanced user convenience:

  • USB Charging Port: Located on the side of the chair, this port allows you to charge your devices without leaving your seat.
  • Cup Holders: Two built-in cup holders keep your beverages within easy reach.
  • Side Pockets: Convenient pockets on the side of the chair provide storage for magazines, remote controls, or other small items.
  • Remote Control Loop: An armrest loop securely holds the remote to prevent drops and ensure it's always accessible.
Close-up of USB and Type-C charging ports on the side of the recliner

Image 6.1: Integrated USB and Type-C charging ports.

Close-up of a built-in cup holder in the armrest

Image 6.2: Built-in cup holder for beverages.

7. Maintenance

To ensure the longevity and appearance of your MCombo Power Lift Recliner Chair, follow these care instructions:

  • Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the faux leather finish.
  • Spills: Blot spills immediately with a clean, dry cloth.
  • Inspection: Periodically check all connections and moving parts for wear or damage. If any issues are found, contact customer support.
  • Placement: Place the chair on a carpeted surface for optimal stability, especially when using the lift function.

8. Troubleshooting

If you encounter any issues with your MCombo Power Lift Recliner Chair, please refer to the following common troubleshooting steps:

  • Chair Not Responding:
    • Ensure the power cord is securely plugged into a working wall outlet.
    • Check all internal wiring connections for looseness.
    • Verify that the remote control is properly connected.
  • Massage/Heat Not Working:
    • Confirm the massage/heat power cord is plugged in.
    • Check the massage remote for battery issues (if applicable) or connection problems.
  • Unusual Noises:
    • Inspect the mechanism for any obstructions.
    • Ensure all assembly bolts are tightened.

If these steps do not resolve the issue, please contact MCombo Customer Support for further assistance.

9. Specifications

FeatureDetail
BrandMCombo
Model Name7040
ColorBlack
SizeMedium
Product Dimensions34.7"D x 34.6"W x 41"H
Item Weight105 pounds
Maximum Weight Recommendation350 Pounds
MaterialFaux Leather, Foam
Special FeaturesAdjustable Backrest, Heated, High Back, Power Lift, Power Recliner
Included ComponentsBackrest, Left armrest, Base, Right armrest, Instruction manual, Accessories box
CertificationsFSC Certified Wood, CertiPUR-US Certified Foam
Detailed dimensions diagram of the MCombo Power Lift Recliner Chair

Image 9.1: Detailed dimensions of the recliner chair.

10. Warranty and Support

10.1 2-Year Limited Warranty

Your MCombo Power Lift Recliner Chair is backed by a 2-year limited warranty. This warranty covers free replacements for:

  • Reclining/Lifting Mechanisms
  • Electrical Systems
  • Upholstery & Cushions
  • Wood/Metal Frame Structures

Please refer to the full warranty details provided in your accessories box for complete terms and conditions.

10.2 Customer Support

For any questions, concerns, or warranty claims, please contact MCombo Customer Support. You can find contact information on the MCombo website or through your purchase platform.

MCombo is committed to providing responsive customer service and support.

Related Documents - 7040

Preview Mcombo Lift Recliner Owner's Manual: Assembly, Operation, and Care
Comprehensive owner's manual for the Mcombo Lift Recliner, covering assembly instructions, operating procedures, care and maintenance, troubleshooting, warranty, and return policy. Includes model numbers 6160-7893, 6160-7679, 6160-7680.
Preview MCombo 6160-7040 Recliner Sofa Assembly Instructions
Comprehensive assembly instructions for the MCombo 6160-7040 Recliner Sofa, covering installation, operation of remote controls for massage and standing-up aid, and customer support information.
Preview MCombo Massage Recliner Assembly and Operation Manual
Comprehensive guide for assembling, operating, and maintaining your MCombo Massage Recliner. Includes troubleshooting and safety instructions.
Preview Mcombo Lift Chair 6160-7040DB Assembly and Operation Guide
Comprehensive assembly and operation guide for the Mcombo Lift Chair 6160-7040DB, detailing parts, assembly steps, remote control functions, and troubleshooting tips.
Preview Massage Recliner Assembly Instructions and User Guide
Comprehensive assembly instructions and FAQ for the Mcombo Massage Recliner, detailing setup, operation of the remote control, reclining functions, and troubleshooting common issues.
Preview MCombo Lift Recliner Owner's Manual (Medium) - Model 6160-7040
This owner's manual provides comprehensive instructions for the MCombo Lift Recliner (Medium), model 6160-7040. It covers safety guidelines, assembly, operation, care, maintenance, troubleshooting, lift motor replacement, disassembly, warranty information, and return/replacement policy.