Bewinner Mini ITX PC Gaming Case Instruction Manual

1. Introduction

Thank you for choosing the Bewinner Mini ITX PC Gaming Case. This compact and versatile chassis is designed for high-performance ITX builds, offering excellent compatibility and efficient cooling in a small form factor. This manual provides essential information for the proper setup, operation, and maintenance of your new PC case.

2. Product Overview

The Bewinner Mini ITX PC Gaming Case is a 9.1L volume chassis crafted from aluminum alloy, acrylic, and synthetic wood. It supports Mini ITX motherboards, SFX/SFX-L power supplies, and features transparent acrylic side panels for visibility. The case includes front I/O with USB 3.0 and Type-C ports, and supports dual 120mm top fans for effective air cooling.

Image: Front view of the Bewinner Mini ITX PC Gaming Case with its internal components, including the power supply, CPU cooler, and motherboard, clearly visible through the transparent side panel.

Image: Diagram highlighting key features of the case, including support for 4070Ti graphics cards, ITX motherboards, SFX power supplies, top 12025 fan positions, and the included solid wood carry handle.

3. Setup Instructions

Follow these steps for proper assembly and setup of your PC components within the Bewinner Mini ITX PC Gaming Case.

3.1 Unpacking and Inspection

1. Carefully remove the PC case and all accessories from the packaging.
2. Inspect all components for any signs of damage. Contact customer support immediately if any damage is found.
3. Verify that all listed accessories are present: 1 x PCIE3.0 Graphics Card Extension Cable, 1 x Wooden Handle, 2 x Baffle Plates, 1 x Baffle, 4 x Foot Pads, 1 x Screw Bag.

Image: The Bewinner Mini ITX PC Gaming Case displayed alongside its included accessories, such as the PCIe riser cable, various screws, baffles, and the wooden handle.

3.2 Component Installation

1. Motherboard Installation: Remove the side panels by unscrewing the standard hand screws. Install your Mini ITX motherboard (170x170mm) into the designated standoffs and secure it with screws from the screw bag.
2. CPU Cooler Installation: Install your CPU cooler. Ensure its height does not exceed 55mm.
3. Power Supply Installation: Mount your SFX or SFX-L power supply into its dedicated bay and secure it.
4. SSD Installation: Install up to two 2.5-inch SSDs in the provided mounting positions (one on top, one on the power supply side).
5. Graphics Card Installation: Connect the provided PCIE3.0 Graphics Card Extension Cable (185mm dual reverse) to your motherboard's PCIe slot. Mount your graphics card to the extension cable and secure it within the chassis.
6. Fan Installation: Install two 120mm fans in the top fan locations for optimal air cooling.
7. Front I/O Connections: Connect the USB 3.0 and Type-C cables from the front panel to the corresponding headers on your motherboard.
8. Cable Management: Route all cables neatly to ensure proper airflow and a clean build.

3.3 Final Assembly

1. Attach the wooden handle to the top of the case using the provided hardware.
2. Affix the four foot pads to the bottom of the case.
3. Reattach the acrylic side panels and secure them with the hand screws.

Image: An angled view of the Bewinner Mini ITX PC Gaming Case, showcasing the wooden handle on top and the perforated top panel for ventilation.

4. Operating Instructions

Once all components are installed and secured, connect your peripherals (monitor, keyboard, mouse) and power cable to the PC. Press the power button on the front panel to start your system. Ensure adequate ventilation around the case during operation.

5. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your PC case and components.

• Cleaning: Use a soft, dry cloth to wipe down the exterior of the case. For dust accumulation inside, use compressed air to gently clear dust from fans, vents, and components. Ensure the PC is powered off and unplugged before cleaning.
• Ventilation: Periodically check that all ventilation openings are clear of obstructions to maintain proper airflow.
• Screw Tightness: Occasionally check that all screws, especially those securing components, are appropriately tightened.

6. Troubleshooting

If you encounter issues, refer to the following common troubleshooting tips:

• No Power: Ensure the power cable is securely connected to both the power supply and the wall outlet. Check the power switch on the power supply unit. Verify all internal power connections (24-pin ATX, 8-pin CPU, GPU power).
• No Display: Confirm that your monitor is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics). Reseat the graphics card and its power cables.
• Overheating: Check that all case fans and CPU cooler fans are spinning correctly. Ensure no cables are obstructing airflow. Verify CPU cooler installation.
• USB/Type-C Ports Not Working: Ensure the front panel USB/Type-C cables are correctly connected to the motherboard headers.

7. Specifications

Image: The Bewinner Mini ITX PC Gaming Case with its dimensions clearly labeled: 315mm (length), 214mm (height), and 135mm (width).

8. Warranty Information

This product comes with a 1-year manufacturer warranty. This warranty is non-transferable and is valid for 1 year from the original date of purchase. Please retain your proof of purchase for warranty claims.

9. Support

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Bewinner website. When contacting support, please have your product model number (Bewinnervihec9z6m1) and proof of purchase readily available.