Yaheetech PU Leather Armchair Instruction Manual

Introduction

This manual provides essential information for the safe and proper assembly, operation, and maintenance of your Yaheetech PU Leather Armchair. Please read all instructions carefully before beginning assembly or use to ensure optimal performance and longevity of your product.

Safety Information

• Maximum Weight Recommendation: Do not exceed a weight of 300 pounds (136 kg) on this armchair. Exceeding this limit may result in damage to the chair or personal injury.
• Ensure all screws and connections are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use the chair on a stable, level surface to prevent tipping.

Parts List

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Upholstered Chair Body (1)
• Metal Leg Frame (1)
• Assembly Screws and Washers (Quantity as specified in packaging)
• Allen Wrench (1)

Assembly Instructions

The Yaheetech PU Leather Armchair features an integral chair structure designed for quick and easy assembly. Typically, setup can be completed in approximately 5 minutes.

1. Unpack Components: Carefully remove all parts from the packaging. Place the upholstered chair body upside down on a soft, clean surface to prevent damage.
2. Attach Leg Frame: Align the pre-drilled holes on the metal leg frame with the corresponding holes on the underside of the chair body. The X-shaped metal legs are designed for enhanced stability.
3. Secure Screws: Insert the provided screws with washers into each hole. Use the included Allen wrench to fasten the screws. Initially, tighten all screws partially to allow for minor adjustments.
4. Final Tightening: Once all screws are in place and the leg frame is properly aligned, fully tighten all screws until secure. Do not overtighten.
5. Verify Stability: Carefully turn the chair upright. Gently test its stability by applying light pressure. Ensure there is no wobbling. If wobbling occurs, check the adjustable foot pads.

Figure 1: Key features and structural components of the armchair.

Figure 2: Detail of the adjustable footpads for stability on uneven surfaces.

Operating Instructions

• Adjustable Foot Pads: The front legs of the chair are equipped with adjustable foot pads. If the chair wobbles on an uneven floor, gently twist these pads to raise or lower the leg until stability is achieved. The back legs have fixed foot pads.
• Placement: This armchair is suitable for various indoor settings including living rooms, bedrooms, reading nooks, offices, and vanity rooms. Its lightweight design allows for easy repositioning as needed.

Maintenance

• Cleaning: The faux leather upholstery is water-resistant and easy to clean. Simply wipe the surface with a damp cloth to remove dust or spills. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
• Inspection: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the chair away from direct sunlight or use curtains/blinds.

Specifications

Figure 3: Product dimensions for the armchair.

Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please refer to the contact information provided with your purchase or visit the official Yaheetech website. Please retain your proof of purchase for any warranty claims.