Introduction
This manual provides essential information for the proper installation, maintenance, and care of your new Fuel Off-Road D803 Flame wheel. Please read this manual thoroughly before installation and retain it for future reference. Adhering to these guidelines will ensure optimal performance and longevity of your wheel.
Product Overview
The Fuel Off-Road D803 Flame wheel is designed for durability and performance, featuring a distinctive gloss black milled finish. Key specifications include:
- Wheel Style: D803 Flame 8
- Wheel Size: 20x10 inches
- Bolt Pattern: 8x170
- Offset: -18mm
- Finish: Gloss Black Milled
Setup and Installation
Proper installation is crucial for safety and performance. It is highly recommended that wheel installation be performed by a certified professional. Incorrect installation can lead to serious injury or damage.
Pre-Installation Checklist:
- Verify that the wheel specifications (size, bolt pattern, offset, hub bore) match your vehicle's requirements. The hub bore for this wheel is 125.1mm.
- Inspect the wheel for any shipping damage or manufacturing defects before mounting tires.
- Ensure you have the correct lug nuts for the wheel and your vehicle.
- Confirm that the tires selected are compatible with the wheel size (20x10 inches).
Installation Steps:
- Safely lift and support the vehicle using appropriate jack stands.
- Remove the old wheels.
- Clean the vehicle's hub mounting surface to ensure a flush fit.
- Mount the new wheel onto the hub, ensuring it seats properly.
- Install lug nuts by hand, ensuring they are not cross-threaded.
- Lower the vehicle partially until the tires just touch the ground.
- Torque the lug nuts to the vehicle manufacturer's recommended specifications using a calibrated torque wrench. Torque in a star pattern to ensure even pressure.
- Lower the vehicle completely.
- After 50-100 miles of driving, re-torque all lug nuts to ensure they remain properly tightened.
Operating Considerations
While wheels do not have "operating" functions in the traditional sense, proper driving habits and awareness are essential for their longevity and your safety.
- Tire Pressure: Maintain correct tire pressure as recommended by your vehicle manufacturer. Incorrect pressure can affect handling, tire wear, and wheel integrity.
- Road Hazards: Avoid potholes, curbs, and other road hazards that can cause impact damage to the wheels.
- Load Capacity: Do not exceed the maximum load capacity of the wheels or tires.
Maintenance
Regular maintenance will preserve the appearance and structural integrity of your Fuel Off-Road wheels.
Cleaning:
- Clean wheels regularly with mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or stiff brushes that can damage the finish.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- For stubborn brake dust, use a pH-neutral wheel cleaner specifically designed for automotive wheels.
Inspection:
- Periodically inspect wheels for any signs of damage, such as cracks, bends, or deep scratches.
- Check lug nuts for proper torque at regular intervals, especially after tire rotations or significant impacts.
Troubleshooting
This section addresses common issues that may arise with automotive wheels.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vibration or Shaking | Unbalanced tires, bent wheel, loose lug nuts, worn suspension components. | Have tires balanced by a professional. Inspect wheels for damage. Re-torque lug nuts. Have suspension checked. |
| Uneven Tire Wear | Incorrect tire pressure, improper alignment, worn suspension, bent wheel. | Check and adjust tire pressure. Get wheel alignment. Inspect suspension. Inspect wheels for damage. |
| Air Leak Around Rim | Improper tire bead seating, damaged tire bead, bent rim flange, corroded rim. | Re-seat tire bead. Inspect tire and wheel for damage. Seek professional repair or replacement if wheel is damaged. |
Specifications
Detailed technical specifications for the Fuel Off-Road D803 Flame wheel:
| Attribute | Value |
|---|---|
| Manufacturer | Fuel OFF-ROAD |
| Brand | Fuel |
| Model | D803 Flame 8 |
| Item Weight | 55.5 pounds |
| Exterior Finish | Gloss Black Milled |
| Manufacturer Part Number | D80320001747 |
| Rim Diameter | 20 Inches |
| Rim Width | 10 Inches |
| Bolt Pattern (Number of Holes) | 8 |
| Bolt Pattern (Pitch Circle Diameter) | 170 Millimeters |
| Backspace | 4.79 Inches |
| Hub Bore | 125.1mm |
Warranty and Support
For information regarding warranty coverage and customer support, please refer to the official Fuel Off-Road website or contact your authorized dealer. Retain your proof of purchase for any warranty claims.
For additional assistance or technical inquiries, please visit the Fuel Off-Road Store on Amazon or contact their customer service directly.
