Byron Wireless Plug-in Doorbell Set

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Byron Wireless Plug-in Doorbell Set, Model DBY-22352BS. This set includes a wireless push button and a plug-in door chime, designed for convenient notification of visitors.

Package Contents

Please verify that all items listed below are present in your package:

• 1x Wireless Bell Push Button
• 1x Wireless Plug-in Door Chime
• 1x CR2032 Battery (for push button)
• Double-sided Tape (for mounting)
• Instruction Manual (this document)

Image: The Byron Wireless Plug-in Doorbell Set, showing the main chime unit on the left and the push button on the right. Both units are black with the "Byron" logo.

Features

• Wireless Operation: Eliminates the need for complex wiring.
• Plug-in Chime: Receiver plugs directly into a standard power outlet.
• Extended Range: Up to 150 meters (unobstructed) wireless operating range.
• Melody Selection: 16 selectable melodies.
• Adjustable Volume: 5 volume levels for customized sound output.
• Weather Resistance: IP44 protection rating for the push button, suitable for outdoor use.
• Easy Installation: Includes all necessary mounting hardware.

Setup

1. Install Push Button Battery: Open the push button casing (refer to diagrams if available in physical manual) and insert the supplied CR2032 battery, ensuring correct polarity. Close the casing securely.
2. Mount Push Button:
   • Choose a suitable location near your door, avoiding direct metal surfaces which can interfere with the wireless signal.
   • Clean the mounting surface thoroughly.
   • Use the provided double-sided tape to adhere the push button to the desired location.
3. Plug in Door Chime: Insert the wireless plug-in door chime into a standard electrical outlet indoors. Ensure it is within the 150-meter unobstructed range of the push button.
4. Pairing (if necessary): The units are typically pre-paired from the factory. If the chime does not ring when the push button is pressed, refer to the "Troubleshooting" section or the full manual for specific pairing instructions.

Operating Instructions

1. Ringing the Doorbell: Press the push button once. The plug-in chime will sound the selected melody.
2. Changing Melodies: Locate the melody selection button on the plug-in chime (refer to product diagrams if available). Press this button repeatedly to cycle through the 16 available melodies. The chime will play a preview of each melody as you select it.
3. Adjusting Volume: Locate the volume control button on the plug-in chime. Press this button to cycle through the 5 available volume levels (low to high).

Maintenance

• Cleaning: Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement (Push Button): When the push button's signal weakens or stops working, replace the CR2032 battery. Open the casing, remove the old battery, and insert a new one with the correct polarity. Dispose of old batteries responsibly.
• Environmental Conditions: While the push button is IP44 rated, extreme weather conditions may affect performance. Ensure the chime unit is used indoors in a dry environment.

Troubleshooting

Specifications

• Model: DBY-22352BS
• Brand: Byron
• Wireless Range: Up to 150 meters (unobstructed)
• Melodies: 16 selectable
• Volume Levels: 5 adjustable
• Push Button Battery: 1x CR2032 (included)
• Chime Power: AC Plug-in
• Protection Rating (Push Button): IP44 (dustproof and splash-resistant)
• Product Dimensions: 10.04 x 7 x 5.93 cm; 610 g

Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please refer to the official Byron website or contact their customer service department. Keep your proof of purchase for warranty claims.

Manufacturer: Byron

Website: www.byron.com (Example link, actual link may vary)