Jnaurb 175Ft 500 LED Outdoor Christmas String Lights (White) Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your Jnaurb 175Ft 500 LED Outdoor Christmas String Lights. Please read these instructions thoroughly before installation and operation to ensure optimal performance and longevity of your product.

Safety Information

• Always unplug the lights from the power source before installation, maintenance, or troubleshooting.
• Do not connect the lights to the power supply while they are still in the packaging.
• Ensure the power adapter is kept dry when used outdoors, as it is not waterproof.
• Avoid damaging the insulation of the wires or the LED bulbs during installation.
• Do not attempt to repair or modify the lights. Contact customer service for assistance.
• Keep out of reach of children and pets.

Package Contents

• 1 x 175ft Christmas String Lights (500 LED)
• 1 x US Adapter
• 1 x User Manual

Product Features

• Length: 175 feet (approximately 53 meters)
• LED Count: 500 LED bulbs
• Light Color: White
• 8 Lighting Modes: Combination, In waves, Sequential, Slo-glo, Chasing/Flash, Slow fade, Twinkle/Flash, Steady on.
• Timer Function: 6 hours On, 18 hours Off (once activated).
• Memory Chip: Saves the last mode setting.
• Waterproof Rating: IP44 (for lights, adapter is not waterproof).
• Voltage: 30V output (UL certified plug).

Setup

Follow these steps to set up your Jnaurb Christmas String Lights:

1. Unpack and Inspect: Carefully remove the string lights from the packaging. Gently uncoil the lights, ensuring no tangles or damage to the wire or bulbs.
2. Placement: Decide on your desired location for decoration. These lights are suitable for both indoor and outdoor use. For outdoor applications, ensure the power adapter is protected from moisture.
3. Installation: Place or hang the LED string lights on trees, bushes, grass, walls, or any other desired surfaces. The flexible clear cable allows for creative arrangements.
4. Connect to Power: Plug the UL-certified power adapter into a standard electrical outlet.

Image: Jnaurb Christmas lights illuminating an indoor scene with a Christmas tree and fireplace.

Image: Coiled Jnaurb 175Ft 500 LED Christmas String Lights in white with the power adapter.

Operating Instructions

Once connected to power, the lights will turn on. Use the button on the power adapter to control the functions.

• Changing Modes: Press the button on the plug to cycle through the 8 different lighting modes: Combination, In waves, Sequential, Slo-glo, Chasing/Flash, Slow fade, Twinkle/Flash, and Steady on.
• Timer Function: The lights feature a built-in timer. Once activated, the timer keeps the lights on for 6 hours and then off for 18 hours. To activate the timer, long press the button on the plug while the green indicator light is on. To cancel the timer, long press the button while the green indicator light is off.
• Memory Function: A built-in memory chip saves your last selected mode setting, so you do not need to reset the mode daily.

Image: Diagram illustrating the 8 lighting modes and the timer function control on the power adapter.

Maintenance

• Cleaning: Gently wipe the lights with a soft, dry cloth if they become dirty. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, carefully coil the string lights and store them in a cool, dry place away from direct sunlight and extreme temperatures.
• Waterproof Considerations: The LED string lights are IP44 waterproof, suitable for outdoor use. However, the power adapter is not waterproof and must be kept dry, especially when installed outdoors.

Image: Jnaurb Christmas lights wrapped around a tree trunk outdoors in the snow, illustrating their IP44 waterproof capability.

Troubleshooting

• Lights not turning on: Ensure the power adapter is securely plugged into a working outlet. Check for any visible damage to the cable or adapter.
• Lights flickering or dim: Verify the power connection. If multiple sets are connected, ensure the total wattage does not exceed the adapter's capacity.
• Timer not working: Ensure the timer function is correctly activated by long-pressing the button on the adapter until the green indicator light confirms activation.
• Mode not changing: Press the button firmly and release to cycle through modes. If unresponsive, unplug and replug the adapter to reset.

If issues persist, please contact Jnaurb customer service for further assistance.

Specifications

Warranty and Support

Jnaurb products are designed for quality and durability. For any questions, concerns, or warranty claims, please contact Jnaurb customer service through the Amazon email box. A 30-day refund guarantee is provided to ensure your purchase is secure.

For more information, visit the official Jnaurb Store on Amazon.

Additional Usage Examples

Image: Various outdoor scenes decorated with Jnaurb white Christmas lights, including trees and house outlines.

Image: Indoor and outdoor settings illuminated by Jnaurb white Christmas lights, showcasing festive ambiance.

Image: A beautifully decorated indoor Christmas scene with a tree, fireplace, and Jnaurb white string lights.