1. Product Overview
The Hansgrohe Pulsify S Showerpipe 260 24220 with ShowerTablet Select 400 is a high-quality shower system designed for wall mounting. This system integrates a shower head, hand shower, and a control unit for a complete showering experience. It features a single jet type and a brushed bronze finish, adding a touch of elegance to your bathroom.
Model Number: 24220140
Brand: Hansgrohe
2. Setup and Installation
This Hansgrohe Showerpipe is designed for wall mounting. Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified professional plumber.
2.1 Included Components
- Shower hose
- Shower head
- Shower regulator (ShowerTablet Select 400)
- Mounting hardware
- User manual (detailed installation instructions)
2.2 Installation Steps (Summary)
- Prepare the wall for mounting, ensuring adequate support and water connections.
- Mount the ShowerTablet Select 400 control unit securely to the wall.
- Connect the water supply lines to the control unit.
- Attach the showerpipe riser and overhead shower.
- Connect the hand shower and hose.
- Test for leaks and proper function.
For detailed, step-by-step installation instructions, please refer to the dedicated installation manual included with your product.
Figure 1: Technical drawing showing the dimensions and components of the Hansgrohe Pulsify S Showerpipe 260. This diagram illustrates the overall height, projection, and spacing for installation.
Figure 2: The Hansgrohe Pulsify S Showerpipe 260 with ShowerTablet Select 400 in a brushed bronze finish, installed in a contemporary bathroom setting. This image provides a visual reference of the product's appearance when installed.
3. Operating Instructions
The Hansgrohe Pulsify S Showerpipe 260 is controlled via the integrated ShowerTablet Select 400. This intuitive control unit allows for easy selection of water outlets and temperature adjustment.
3.1 Water Flow and Temperature Control
- Temperature Adjustment: Use the temperature control knob on the ShowerTablet Select 400 to set your desired water temperature. For safety, a temperature stop may be present to prevent scalding.
- Flow Control: The ShowerTablet Select 400 typically features buttons or levers to turn the water flow on/off and adjust its intensity for the overhead shower and hand shower independently.
3.2 Shower Head Functionality
The Pulsify S Showerpipe 260 features a single jet type for both the overhead and hand showers, providing a consistent and comfortable spray pattern.
4. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hansgrohe Showerpipe. Always use appropriate cleaning agents and methods to avoid damaging the finish or components.
4.1 Cleaning the Finish
- Clean the brushed bronze finish with a soft, damp cloth and a mild soap solution.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia-based, bleach-based) as these can damage the surface.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
4.2 Cleaning Shower Heads
- The nozzles of the shower heads are typically designed for easy limescale removal. Gently rub the silicone nozzles to dislodge any mineral deposits.
- For more stubborn deposits, use a descaling solution specifically designed for bathroom fixtures, following the manufacturer's instructions.
5. Troubleshooting
If you encounter issues with your Hansgrohe Showerpipe, consult the following common troubleshooting tips. For complex problems, contact a qualified plumber or Hansgrohe customer support.
5.1 Low Water Pressure
- Check if the main water supply valve is fully open.
- Inspect shower head nozzles for limescale buildup and clean as described in the Maintenance section.
- Ensure there are no kinks in the shower hose.
5.2 Water Leaks
- Check all connections for tightness. Do not overtighten.
- Inspect seals and O-rings for damage. Replace if necessary.
- If leaks persist from within the control unit, professional assistance is required.
5.3 Incorrect Water Temperature
- Verify that the hot and cold water supplies are connected correctly.
- If a thermostatic cartridge is present, it may require calibration or replacement by a professional.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | 24220140 |
| Brand | Hansgrohe |
| Color | Brushed Bronze |
| Material | Plastic (components) |
| Finish Type | Brushed |
| Number of Handles | 1 |
| Mounting Type | Wall Mount |
| Item Weight | 9.69 kilograms |
| Included Components | Shower hose, shower head, shower regulator, user manual |
7. Warranty and Support
Hansgrohe products are manufactured to high-quality standards and come with a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and product type.
For detailed warranty information, product support, or to locate authorized service partners, please visit the official Hansgrohe website or contact their customer service directly. Keep your proof of purchase for warranty claims.
Hansgrohe Official Website: www.hansgrohe.com