HiBy FC6
Contents
HiBy FC6 USB Headphone R2R DAC/AMP User Manual
Model: FC6
Introduction
The HiBy FC6 is a portable USB Headphone R2R DAC/AMP designed to deliver high-fidelity audio. Featuring HiBy's proprietary Darwin Architecture, it offers advanced digital-to-analog conversion with NOS (Non-Oversampling) and OS (Oversampling) modes, MQA 8X unfolding, and a robust R2R resistor network for an authentic and precise audio experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FC6 device.
What's in the Box
- FC6 Unit
- Protective Case
- Type-C USB Cable
- Type-C to Type-C Data Cable
- User Manual
- Storage Box
Product Overview
Familiarize yourself with the components and controls of your HiBy FC6.






Setup
- Connect to Source Device: Use the provided Type-C to Type-C data cable to connect the HiBy FC6 to your smartphone, tablet, or computer's USB-C port. If your device uses a different USB port (e.g., USB-A), you may need an appropriate adapter (not included).
- Connect Headphones: Plug your headphones or earphones into the 3.5mm audio output jack on the HiBy FC6.
- Power On: The FC6 will typically power on automatically once connected to a compatible source device. The screen will illuminate, indicating it is ready for use.
- Install Drivers (if necessary): For some computer operating systems, you may need to install specific drivers for optimal performance. Refer to the HiBy official website for the latest driver downloads.
Operating Instructions
Volume Control
Use the physical volume buttons located on the side of the FC6 to adjust the output volume. Press '+' to increase volume and '-' to decrease volume. The current volume level will be displayed on the screen.
NOS/OS Mode Switching
The HiBy FC6 offers both Non-Oversampling (NOS) and Oversampling (OS) modes, switchable on the fly to suit your audio preference.
- NOS Mode: Provides a direct conversion of digital signals to analog output, resulting in a distinct analog sound signature. This mode is particularly suitable for music files or streams with a sample rate of 192kHz or higher, offering high fidelity at elevated resolutions.
- OS Mode: Utilizes oversampling and an ultrasonic lowpass filter (HDR) to effectively remove aliasing artifacts. This mode allows for personalized adjustments of the sound signature, adapting to different earphones and musical styles.

MQA 8X Unfolding
The FC6 supports MQA (Master Quality Authenticated) unfolding up to 8x, allowing you to experience master-tape quality audio reconstruction. This feature ensures that music reproduction closely rivals the authenticity of original studio recordings and live performances.
Darwin FIR Filter / HDR
The Darwin Architecture incorporates a FIR filter and HDR (High Dynamic Range) capabilities. This allows for up to 16x oversampling and a wide range of custom filters, enabling you to fine-tune the sound to match various music genres and personal preferences. It optimizes dynamic range and refines detail retrieval for enhanced precision and fidelity.
Lossless Streaming
Integrate the FC6 with HiByMusic's exclusive USB mode for seamless streaming of digital audio. This ensures bit-perfect transmission, fully utilizing the decoding and amplification capabilities of the FC6 for an uncompromised lossless music experience.
R2R Design
The FC6 utilizes a sophisticated R2R network with 96 high-precision resistors, combined with proprietary linearity compensation technology. This design aims to provide the organic flow characteristic of R2R DACs alongside the precise accuracy typically found in traditional DS DACs.
Audio Format Indicator
The FC6's display changes color to indicate the current audio format and sample rate being processed:
- Magenta: MQA Rendering
- Yellow: ≤48K (Sample Rate)
- Cyan: 64K - 192K (Sample Rate)
- Orange: 352.8K - 768K (Sample Rate)
- White: DSD
- Red: Paused

Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the FC6. Do not use liquid cleaners, aerosols, or solvents.
- Storage: When not in use, store the FC6 in its protective case to prevent scratches and damage. Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Avoid Drops: While durable, dropping the device can cause internal damage. Handle with care.
Troubleshooting
- No Sound Output:
- Ensure headphones are properly connected.
- Check the volume level on both the FC6 and your source device.
- Verify the FC6 is correctly connected to the source device and recognized. Try reconnecting the USB cable.
- Ensure the audio output on your source device is set to the FC6.
- Distorted Sound:
- Reduce the volume level.
- Check the audio file quality.
- Ensure the USB cable is not damaged.
- Device Not Recognized by Computer/Phone:
- Try a different USB port or cable.
- Restart your computer or phone.
- Install or update necessary drivers from the HiBy official website.
- Intermittent Connection:
- Ensure the USB cable is securely connected at both ends.
- Avoid bending or stressing the cable during use.
Specifications
| Brand | HiBy |
| Model Number | FC6 |
| Compatible Devices | Headphone |
| Hardware Interface | USB |
| Audio Output Mode | Digital |
| Item Weight | 7 ounces |
| Package Dimensions | 5.2 x 4.53 x 2.17 inches |
| First Available | June 28, 2023 |
Warranty and Support
For detailed warranty information and technical support, please refer to the official HiBy website or contact their customer service directly. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.