1. Introduction
The FEZIBO Height Adjustable Electric Desk is designed to enhance your working environment by allowing seamless transitions between sitting and standing positions. This electric desk features a motorized lifting mechanism for smooth height adjustment, memory control for personalized settings, and anti-collision technology for safety. It is a practical and multifunctional solution for both office and home environments.
Key features include:
- Electric lifting system with smooth and quiet operation.
- Four memory preset buttons for quick height adjustments.
- Anti-collision technology to prevent accidents.
- Durable industrial-grade steel frame with a 70 kg load capacity.
- Tabletop made from stained oak veneer.
Figure 1: FEZIBO Height Adjustable Electric Desk
2. Safety Information
Please read and understand all safety instructions before operating the desk. Failure to follow these instructions may result in injury or damage to the product.
- Be cautious when adjusting the desk's height to avoid injury.
- Ensure the desk is properly assembled and stable before use.
- Keep the desk area clear of obstructions to prevent the anti-collision sensors from activating unexpectedly.
- This product is only for indoor use.
- Serious or fatal crushing injuries can occur from furniture tip-over.
- ALWAYS secure this furniture to the wall using tip-over restraints.
- To further reduce the risk of serious injury and death from tip-overs:
- Place heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, desks, or shelves.
Figure 2: Important Safety Warnings
3. Setup and Assembly
The FEZIBO Electric Desk is designed for quick and straightforward assembly. The tabletop is divided into two parts, which can be assembled with precise screws and accessories. A simple tool is included to assist with the process.
3.1. Unpacking
Carefully remove all components from the packaging. Verify that all parts listed in the assembly guide (not provided in this manual) are present and undamaged. Keep packaging materials until assembly is complete in case of missing parts or returns.
3.2. Assembly Steps
- Assemble the desk frame according to the provided instructions. Ensure all screws are tightened securely.
- Attach the two tabletop sections together using the designated connectors and screws.
- Mount the assembled tabletop onto the desk frame, aligning it with the pre-drilled holes.
- Secure the tabletop to the frame using the appropriate fasteners.
- Install the control panel and connect all necessary cables as indicated in the assembly guide.
Figure 3: Desk components ready for assembly
4. Operating Instructions
The FEZIBO Electric Desk features an intuitive control panel for easy height adjustment and memory functions.
4.1. Control Panel Overview
Figure 4: Smart Keypad
- Up/Down Arrows (▲ / ▼): Press and hold to manually adjust the desk height. The desk moves at a speed of 2 cm/second (approximately 1 inch per second) with soft start and stop.
- Memory Buttons (1, 2, 3, 4): These buttons allow you to save and recall preferred height settings.
4.2. Adjusting Height
To adjust the desk height, simply press and hold the up (▲) or down (▼) arrow button until the desired height is reached. The current height will be displayed on the digital screen.
Figure 5: Standing and Sitting Height Range
4.3. Setting Memory Presets
- Adjust the desk to your desired height using the up/down arrows.
- Press the
