Introduction
This manual provides detailed instructions for the proper use and maintenance of your NOVOSTELLA RF Remote Control. This remote is designed for seamless operation with NOVOSTELLA NTF93 and NTF94 series floodlights. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
Product Overview
The NOVOSTELLA RF Remote Control allows you to manage various functions of your compatible floodlights, including power, color selection, brightness, and dynamic lighting modes. Its ergonomic design ensures comfortable handling.
Image 1: Front view of the NOVOSTELLA RF Remote Control, displaying its various buttons for power, color selection, timing, speed adjustment, and dynamic lighting effects.
Setup
1. Battery Installation
The remote control requires one CR2 battery, which is included. To install or replace the battery:
- Locate the battery compartment on the back of the remote control.
- Open the compartment cover.
- Insert the CR2 battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
2. Initial Pairing with Floodlight
To ensure the remote control communicates with your NOVOSTELLA floodlight, follow these pairing instructions:
- Ensure your NOVOSTELLA floodlight (NTF93 or NTF94) is powered off.
- Unplug the power cord of the floodlight from the electrical outlet.
- Plug the power cord back into the electrical outlet to power on the floodlight.
- Within the first 3 minutes after plugging in the floodlight, press and hold the ON button on the remote control for 5 seconds.
- The floodlight will flash a green light to indicate successful pairing.
If the floodlight does not flash green, repeat the pairing process from step 2.
Operating Instructions
The remote control features various buttons for comprehensive control over your floodlights. Refer to the image below for button layout and functions.
Image 2: The NOVOSTELLA RF Remote Control being used to control multiple floodlights in an outdoor setting, demonstrating its effective control distance.
Button Functions:
- ON / OFF: Power on or off the floodlight.
- R / G / B / W: Select Red, Green, Blue, or White static colors.
- Color Selection Buttons: A grid of 12 buttons to select various preset static colors.
- Brightness Adjustment (Sun icons): Increase or decrease the brightness level of the selected color or mode.
- 3H / 6H: Set a timer for the floodlight to turn off after 3 or 6 hours.
- Speed- / Speed+: Adjust the speed of dynamic lighting modes (e.g., Fade, Strobe).
- Jump: Activates a mode where colors change abruptly.
- Fade: Activates a mode where colors transition smoothly.
- Smooth: Activates a mode with a gradual and continuous color change.
- Strobe: Activates a mode where colors flash rapidly.
- Rainbow: Initiates a dynamic mode cycling through a spectrum of colors.
- Chase: Activates a dynamic mode where colors appear to 'chase' each other.
- Flow: Activates a dynamic mode with a flowing color effect.
- Breath: Activates a mode where colors gently fade in and out.
- Flash: Activates a mode with quick, intermittent flashes of color.
- AUTO: Cycles through various dynamic lighting modes automatically.
Maintenance
To ensure the longevity and proper functioning of your remote control, follow these maintenance guidelines:
- Keep the remote control dry. Avoid exposure to moisture or liquids.
- Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- If the remote control will not be used for an extended period, remove the battery to prevent leakage.
- Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Remote Control Not Working / Unresponsive
- Check Battery: Ensure the CR2 battery is correctly installed and has sufficient charge. Replace if necessary.
- Re-Pairing: If the remote control stops working or is unresponsive, it may have lost its pairing with the floodlight. Follow the initial pairing instructions detailed in the Setup section: Unplug the floodlight, plug it back in, and within 3 minutes, press and hold the ON button on the remote for 5 seconds until the floodlight flashes green.
- Obstructions: Ensure there are no significant physical obstructions between the remote control and the floodlight that could interfere with the RF signal.
- Distance: Confirm you are within the effective operating range of the remote control (typically up to 40 feet).
Specifications
| Feature | Specification |
|---|---|
| Model Numbers | NTF93, NTF94 (Remote is compatible with both) |
| Connectivity Technology | Radio Frequency (RF) |
| Compatible Devices | NOVOSTELLA Floodlights (NTF93-RGBW-US-1, NTF94-RGBW-US-1) |
| Max Supported Devices | 1 (per pairing instance) |
| Battery Type | 1 x CR2 (included) |
| Item Weight | 1.76 ounces |
| Package Dimensions | 6.93 x 3.27 x 0.51 inches |
| Special Feature | Ergonomic Design |
Warranty and Support
NOVOSTELLA products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official NOVOSTELLA website. Please have your product model number and purchase date available when contacting support.
