Introduction
This manual provides essential information for the safe and efficient use of your Redodo 12V 100Ah Mini LiFePO4 Lithium Battery. Please read it thoroughly before installation and operation to ensure optimal performance and longevity of your battery.
Key Features
- Compact Design: 35% more compact than standard 100Ah batteries (10.23"L x 5.23"W x 8.95"H) for easy installation in tight spaces.
- Universal Installation: Can be mounted in any orientation, including upside down.
- High Energy Density: Weighs only 19.84 lbs, offering 22% higher energy density than Group 31/24 batteries with 1280Wh of power.
- Advanced BMS Protection: Upgraded 100A Battery Management System (BMS) protects against over-charging, over-discharging, over-current, and short-circuits.
- Long Lifespan: Built with premium Grade A LiFePO4 cells, certified to UL1973/UN38.3 standards, providing 4000+ deep cycles and a 10-year lifespan.
- Versatile Applications: Compatible with trolling motors (30-70 lbs), RVs, solar home systems, and camping setups. Supports series/parallel connections (up to 4P4S).
What's in the Box
- 4 x 12.8V 100Ah MINI LiFePO4 Lithium Battery
- M8- 35/64" (14mm) Terminal Bolts
- Insulating Caps for the Bolts
Specifications
| Brand | Redodo |
| Model | 12V100AH Mini Pack4 |
| Voltage | 12.8 Volts |
| Battery Capacity | 100 Amp Hours |
| Amperage | 100 Amps |
| Battery Cell Composition | Lithium-Phosphate (LiFePO4) |
| Product Dimensions | 10.23"L x 5.23"W x 8.95"H |
| Item Weight | 19.84 pounds |
| Terminal Type | M8 |
| Resistance | 40 Ohms |
| Cycle Life | 4000+ Deep Cycles |
| Lifespan | 10 Years |
| Certifications | UL1973/UN38.3 standards |
Setup and Installation
Unboxing and Initial Inspection
Upon receiving your Redodo LiFePO4 battery, carefully unbox it and inspect for any signs of damage. Ensure all components listed in the "What's in the Box" section are present.
Image: Redodo 12V 100Ah Mini LiFePO4 Battery showing the top with M8 terminals and a removable carrying strap.
Image: Comparison of Redodo 12V 100Ah Mini LiFePO4 Battery dimensions against Group 24 and Group 31 batteries, highlighting its compact size.
Terminal Connections
The battery comes with M8 terminals. Ensure proper polarity when connecting. The positive terminal is typically red, and the negative terminal is black. Use the provided insulating caps for protection when not in use.
Video: This video demonstrates the physical characteristics of the Redodo 12.8V 100Ah LiFePO4 battery, including its flame-retardant ABS plastic casing, removable nylon carrying strap, and M8 terminals with protective caps.
Series and Parallel Connections
The Redodo Mini battery supports up to 4 batteries in series (4S) and 4 batteries in parallel (4P) for higher voltage or capacity systems. Always ensure batteries are at the same state of charge (SOC) before connecting them in series to prevent imbalance and potential damage. Charge each battery individually to full capacity before making series connections.
Video: This video demonstrates how to set up a 24V off-grid system using two Redodo 12V 100Ah Mini batteries in series, along with an MPPT charge controller and a 3000W inverter. It emphasizes the importance of individually charging batteries to full capacity before connecting them in series to ensure proper balancing.
Image: A diagram illustrating a home energy storage system with multiple Redodo batteries connected in a 4 serial and 4 parallel configuration.
Mounting
The battery's compact size and ability to be mounted in any orientation (even upside down) provide flexibility for various applications like RVs, trolling motors, and solar home systems. Ensure adequate clearance around terminals to prevent accidental contact.
Image: The Redodo 12V 100Ah Mini LiFePO4 Battery illustrating its 1280Wh energy capacity and estimated run times for common appliances like an electric kettle, laptop, toaster, and coffee maker.
Image: Several Redodo batteries displayed in different mounting orientations, emphasizing their universal installation flexibility.
Video: This video demonstrates how to install a Redodo 12V 100Ah battery into a portable battery box, connecting the terminals, securing the lid, and utilizing the various accessory ports including 12V car ports and USB-A/USB-C ports.
Operating Instructions
Charging
It is recommended to charge the battery with a 14.6V 20A charger for a full recharge in approximately 5 hours. The upgraded 100A BMS ensures safe charging by protecting against over-charging.
Video: This video demonstrates the unboxing and initial setup of an Ardroit 14.6V 30A LiFePO4 charger, highlighting its components and how to connect it to a Redodo 12.8V 165Ah battery for charging. It also shows the LED indicators for charging status and discusses the smart charging cycle.
Discharging
The battery provides 1280Wh of power. The BMS protects against over-discharging to prolong battery life. Ensure your load is within the battery's continuous discharge current limits.
Image: The Redodo 12V 100Ah Mini LiFePO4 Battery illustrating its 1280Wh energy capacity and estimated run times for common appliances like an electric kettle, laptop, toaster, and coffee maker.
Video: This video demonstrates a capacity test of the Redodo 12V 100Ah LiFePO4 battery, showing it delivering 105.08Ah and 1339Wh, exceeding its rated capacity. It also shows the battery powering a 700W load and the corresponding discharge data on a monitoring device.
Video: This video showcases the Redodo 12V 100Ah LiFePO4 battery's performance by powering a washing machine, dryer, and a workstation with multiple monitors and laptops. It demonstrates the battery's capacity to handle high-power appliances and provides real-time data via the Bluetooth app, including power draw and remaining capacity.
Maintenance
- Regularly inspect battery terminals for corrosion or loose connections. Clean as needed.
- Keep the battery clean and dry.
- Avoid exposing the battery to extreme temperatures outside its operating range.
- For long-term storage, charge the battery to 50% State of Charge (SOC) and store in a cool, dry place.
Troubleshooting
- Battery not charging: Ensure the charger is correctly connected and powered. Check the charger's LED indicator. Verify battery terminals are clean and secure.
- Battery not providing power: Check all connections for tightness and correct polarity. Ensure the battery is sufficiently charged. The BMS may have activated a protection mode (e.g., over-discharge, over-current); remove the load and attempt to recharge.
- BMS protection activated: If the battery stops functioning, the BMS may have triggered a protection. Disconnect the load and/or charger, wait a few minutes, and then attempt to reconnect. Some chargers have a "wake-up" feature for deeply discharged LiFePO4 batteries.
Safety Information
- Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when handling batteries.
- Do not short-circuit the battery terminals.
- Use only chargers specifically designed for LiFePO4 batteries.
- Do not disassemble, puncture, or damage the battery.
- Keep the battery away from heat sources, open flames, and flammable materials.
- In case of fire, use a Class D fire extinguisher. Water can exacerbate lithium battery fires.
- Keep out of reach of children.
Warranty and Support
The Redodo 12V 100Ah Mini LiFePO4 battery is built with premium Grade A cells and is designed for a 10-year lifespan with 4000+ deep cycles. Redodo offers a 5-year guarantee on this product.
For technical support or warranty claims, please contact Redodo US customer service. Refer to the product packaging or the official Redodo website for contact details.
- Manufacturer: Redodo
- Brand Store: Visit Redodo Store
