GLOWRIUM Aquarium Light User Manual

Product Overview

The GLOWRIUM Aquarium Light is an advanced LED lighting system designed for freshwater fish tanks. It features a full spectrum of light, including ultra-bright white, blue, and red LEDs, to promote healthy aquatic plant growth and enhance the vibrant coloration of fish. The light includes a built-in timer and adjustable brightness settings, offering both daylight and moonlight modes for a natural day-night cycle simulation.

Key Features:

• Full-Spectrum Lighting: Features 5000K white, 460nm blue, and 660nm red LEDs for optimal plant growth and fish coloration with a CRI of over 90.
• Day/Night Modes: Easily switch between bright daylight (White, Red, Blue) and gentle moonlight (Blue) modes.
• Timer and Memory Function: Offers 3 timer options (6H, 9H, 12H) to simulate sunrise and sunset. Retains settings after power outages.
• All-in-One Body with Extendable Bracket: Durable aluminum body for efficient heat dissipation and stability. Adjustable brackets fit 30-inch to 35-inch aquariums.

Setup and Installation

Follow these steps to properly set up your GLOWRIUM Aquarium Light:

1. Unpack Components: Carefully remove the aquarium light and all accessories from the packaging. Ensure all parts are present: LED light bar, extendable brackets, and power adapter with controller.
2. Attach Brackets: Slide the extendable brackets into the slots on both ends of the LED light bar. Ensure they are securely fastened. The all-in-one body design provides enhanced stability.
3. Position on Aquarium: Place the light bar with attached brackets onto the edges of your aquarium. Adjust the extendable brackets to fit your tank's width (suitable for 30-35 inch tanks). The non-slip design ensures secure placement.
4. Connect Power: Plug the power adapter into the light bar's input port. Then, plug the power adapter into a standard electrical outlet.
5. Initial Power On: Press the ON/OFF button on the inline controller to turn on the light.

Image: The GLOWRIUM Aquarium Light showing the main light bar, inline controller, and extendable mounting brackets.

Image: Close-up view of the light's extendable bracket and internal LED layout, highlighting the heat dissipation features.

Operating Instructions

The GLOWRIUM Aquarium Light is controlled via an inline remote with intuitive buttons.

1. Power On/Off:

• Press the ON/OFF button (power symbol) to turn the light on or off.

2. Mode Selection (Day/Night):

• Press the MODE button (circular arrow) to switch between Day mode (full spectrum: white, red, blue LEDs) and Night mode (blue LEDs only).

Image: Comparison of the aquarium under Day mode (full spectrum) and Night mode (blue light), demonstrating the visual difference.

3. Brightness Adjustment:

• Use the DIM + and DIM - buttons to adjust the light intensity. The light offers 7 levels of dimming.
• For stepless dimming, press and hold the DIM button to smoothly adjust brightness from 1% to 100%.

Image: The inline controller illustrating the 7 dimming levels and the stepless dimming function.

4. Timer Function:

• Press the TIMER button (clock symbol) to cycle through the preset timer options: 6 hours, 9 hours, or 12 hours.
• Once a timer is set, the light will automatically follow a 24-hour day-night cycle, simulating sunrise and sunset.
• To exit the automatic mode, press and hold the TIMER button until the blue indicator light turns off.
• The power outage memory function ensures your timer settings are retained even after a power interruption.

Image: A visual representation of the sunrise and sunset simulation feature, showing the light intensity changes throughout a 24-hour cycle.

Important Note on Timer Function (Newer Models):

For models with batch number 202404 and later, the timer function has been upgraded. Once the timer is completed, the light will automatically enter the cycle mode as set. When the aquarium light is in blue light mode, you can use the MODE button to switch between white and blue light modes. The system will record the newly set light mode and operate accordingly in the subsequent cycle mode.

Image: A visual comparison detailing the differences in timer logic between older and newly upgraded versions of the light controller.

Maintenance

The GLOWRIUM Aquarium Light is designed for low maintenance. Regular cleaning of the light surface will ensure optimal light output and longevity.

• Cleaning: Gently wipe the LED surface and the light bar with a soft, damp cloth to remove any dust or water spots. Ensure the light is unplugged before cleaning.
• Heat Dissipation: The aluminum body is designed for efficient heat dissipation. Ensure the light is not covered or obstructed to allow for proper airflow.

Troubleshooting

Specifications

Warranty and Support

GLOWRIUM is committed to providing high-quality lighting products. We solemnly promise to accept returns and exchanges for any quality issues within the specified timeframe.

For support, inquiries, or to utilize our after-sales channels, please contact GLOWRIUM direct. We are dedicated to resolving any problems you may encounter and steadfastly honoring our commitment to customer satisfaction.

For more information, visit the official GLOWRIUM store: GLOWRIUM Store on Amazon