1. Important Safety Instructions
Please read all instructions carefully before using your Bearhug Electric Blanket. Retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or injury.
- Do not use with infants, children, incapacitated individuals, or persons insensitive to heat.
- Do not use if wet.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Do not use with other heating devices.
- Ensure the controller is not covered or placed under the blanket during operation to prevent overheating.
- Always disconnect the blanket from the power outlet before cleaning or storing.
- Avoid sharp folds in the blanket, especially when storing, as this can damage the heating elements.
2. Product Overview
The Bearhug Electric Blanket provides customizable warmth with its dual-sided design and multiple heat settings. It features a soft Faux Fur side and a cozy Sherpa side for enhanced comfort.

Image: The Bearhug Electric Blanket in use on a bed, showcasing its full size and comfortable appearance.

Image: A detailed view of the blanket's dual-sided construction, highlighting the soft faux fur and fluffy sherpa textures.
3. Setup Instructions
- Unpack the Blanket: Carefully remove the electric blanket from its packaging. Unfold it completely.
- Position on Bed: Place the electric blanket flat on your bed, ensuring it is evenly spread and not bunched or folded. The blanket should be positioned so that the connector for the controller is near the head of the bed, on the side you prefer.
- Connect the Controller: Locate the connector on the blanket and the corresponding plug on the controller cord. Firmly push the controller plug into the blanket connector until it clicks securely into place.
- Plug into Power Outlet: Plug the power cord from the controller into a standard 120V AC electrical outlet. Ensure the outlet is easily accessible.
- Initial Inspection: Before first use, visually inspect the blanket and cord for any signs of damage. Do not use if any damage is observed.
4. Operating Instructions
Your Bearhug Electric Blanket features a user-friendly controller for adjusting heat and timer settings.

Image: The blanket controller displaying heat settings, with a person comfortably using the blanket.
- Turning On/Off: Press the power button on the controller to turn the blanket on or off. The display will illuminate when on.
- Adjusting Heat Settings: Use the '+' and '-' buttons to select your desired heat level. There are 10 heat settings available, allowing for personalized warmth from gentle to intense heat.
- Setting the Auto Shut-Off Timer: Press the 'TIMER' button to cycle through the auto shut-off options. You can set the timer from 1 to 12 hours in 1-hour increments. The blanket will automatically turn off after the selected time has elapsed, providing safety and energy efficiency.

Image: The blanket in use, emphasizing the 12-hour auto-off timer and safety features like ETL certification and overheating protection.
5. Maintenance and Care
Proper care ensures the longevity and performance of your electric blanket. The Bearhug Electric Blanket is machine washable.
- Before Washing: Always disconnect the controller from the blanket and unplug the power cord from the wall outlet. Ensure the cord and controller are completely dry before reconnecting.
- Machine Washing: Machine wash on a gentle cycle with cold water. Use a mild detergent. Do not bleach.
- Drying: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before storing or reconnecting to power. Do not iron.
- Storage: When not in use, store the blanket in a cool, dry place. Avoid folding it tightly or placing heavy objects on it, which could damage the internal wiring.
6. Troubleshooting
If you encounter issues with your electric blanket, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Not plugged in; controller not connected securely; power outage; blanket folded. | Ensure power cord is plugged in and controller is securely attached. Check household circuit breaker. Unfold blanket completely. |
| Controller display not working | No power; controller malfunction. | Check power connection. Try unplugging and re-plugging the controller. If issue persists, contact customer support. |
| Blanket too hot or not hot enough | Incorrect heat setting. | Adjust heat setting using the '+' and '-' buttons on the controller. |
If the problem persists after attempting these solutions, please contact Bearhug customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Bearhug |
| Model Number | BHEBPV-LG7784 |
| Size | Full Size 77" x 84" (2.13L x 1.96W Meters) |
| Color | Dreamy Milky Way |
| Material | Sherpa Faux Fur |
| Heat Settings | 10 |
| Auto Shut-Off Timer | 1-12 Hours (in 1-hour increments) |
| Item Weight | 3.2 Kilograms |
| Special Features | Reversible |
8. Warranty and Support
Your Bearhug Electric Blanket is backed by a commitment to quality and customer satisfaction.
- Warranty: The product includes a 1-Year Repair warranty for manufacturing defects.
- Returns: A 30-day return policy is available from the date of purchase.
- Customer Support: We aim for a 24-hour response time for all customer inquiries. For assistance, troubleshooting, or warranty claims, please contact Bearhug customer service through your retailer or the official Bearhug website.

Image: Visual representation of the product's support features: 1-year repair, 24-hour response, and 30-day return.