Bearhug Electric Heated Blanket User Manual

1. Introduction

Thank you for choosing the Bearhug Electric Heated Blanket. This manual provides essential information for the safe and efficient use of your new heated blanket. Please read all instructions carefully before use and retain this manual for future reference.

The Bearhug Electric Heated Blanket is designed to provide warmth and comfort. It features a reversible faux fur and sherpa design, offering a soft and cozy experience. This blanket is ETL certified, ensuring it meets safety standards.

2. Important Safety Information

To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions:

• Always use the correct voltage: 120V/60Hz.
• Turn off and unplug the blanket when not in use.
• Avoid prolonged use on one body area to prevent localized overheating.
• Do not use sharp objects on the product.
• Prevent wire entanglement during use and storage.
• Avoid overlapping with other heating products.
• Not suitable for individuals with limited self-care ability.
• Do not wrap the controller in the product when in use.
• This blanket is equipped with Overheat Protection for enhanced safety.

This blanket is ETL Certified, indicating compliance with North American safety standards.

3. Product Features

• Material: Reversible Faux Fur and Sherpa (Polyester Velvet+sherpa) for ultimate softness and warmth.
• Size: Queen Size (84" x 90").
• Heating Levels: 10 adjustable heating levels (90°F to 108°F).
• Auto-off Timer: Adjustable auto-off timer from 1 to 12 hours.
• Dual Controls: Two independent controllers for two separate temperature zones, ideal for couples.
• Long Power Cord: Equipped with a 19 ft long cord for convenient placement.
• Even Heat Distribution: Designed for consistent warmth across the entire blanket surface.

4. Setup Instructions

1. Unpack: Carefully remove the heated blanket and controllers from the packaging.
2. Position: Lay the blanket flat on your bed or desired surface, ensuring it is not folded or bunched up.
3. Connect Controller: Locate the connector on the blanket and firmly plug in the controller cord. Ensure a secure connection.
4. Plug In: Insert the power plug into a 120V/60Hz electrical outlet.

5. Operating Instructions

Your Bearhug Electric Heated Blanket features an easy-to-use controller for personalized comfort.

1. Power On/Off: Press the power button on the controller to turn the blanket on or off.
2. Adjust Temperature: Use the '+' and '-' buttons next to 'TEMP' to cycle through the 10 heating levels (90°F to 108°F). The current setting will be displayed on the controller screen.
3. Set Timer: Use the '+' and '-' buttons next to 'TIMER' to set the auto-off timer from 1 to 12 hours. The blanket will automatically shut off after the set time.
4. Dual Control (Queen Size): For Queen size blankets, there are two independent controllers, allowing each side of the blanket to be set to a different temperature and timer.

6. Maintenance and Cleaning

The Bearhug Electric Heated Blanket is machine washable for easy care. Follow these instructions carefully to maintain the blanket's quality and functionality:

1. Disconnect: Always unplug the power cord from the wall outlet and detach the controller(s) from the blanket before washing.
2. Pre-soak (Optional): For best results, you may pre-soak the blanket for 15 minutes in mild soapy water.
3. Wash: Machine wash on a gentle cycle with cold water. Do not bleach.
4. Rinse: Rinse on a normal cycle.
5. Dry: Tumble dry on low heat. Do not iron or dry clean. Ensure the blanket is completely dry before reconnecting the controller or storing.

7. Troubleshooting

If your heated blanket is not functioning as expected, please review the following common issues before contacting support:

• No Heat: Ensure the power cord is securely plugged into both the wall outlet and the blanket connector. Check if the controller is properly attached.
• Uneven Heat: Ensure the blanket is laid flat and not bunched or folded, which can impede heat distribution.
• Controller Display Off: Verify the blanket is plugged in and the power button on the controller has been pressed.

For further assistance, please refer to the support section.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your product packaging or contact Bearhug customer service. Contact details can typically be found on the product packaging or the official Bearhug website.