Heng Long 1/16 7.0 Customized Leopard2A6 RC Tank 3889 Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Heng Long 1/16 7.0 Customized Leopard2A6 RC Tank 3889. Please read these instructions thoroughly before first use to ensure proper function and longevity of your product.

Image: Front-side view of the Heng Long 1/16 7.0 Customized Leopard2A6 RC Tank 3889, showcasing its camouflage paint scheme and detailed features.

Safety Information

• This product is not suitable for children under 14 years of age. Adult supervision is recommended for all users.
• Always operate the RC tank in open areas, away from people, pets, and obstacles.
• Do not operate near water or in wet conditions to prevent electrical damage.
• Ensure all components are securely attached before operation.
• The BB airsoft firing mechanism should only be used in a safe environment, targeting appropriate objects and never at people or animals.
• Handle batteries with care. Do not puncture, expose to extreme temperatures, or short-circuit.

Package Contents

Verify that all items listed below are present in your package:

• 1x Tank Body (Leopard2A6 3889)
• 1x 2.4G Remote Control
• 1x USB Charger Wire
• 1x Tank Battery (Lithium Polymer)
• 1x Decoration Parts Bag
• 1x Operation Manual (this document)

Setup

1. Charge the Tank Battery: Connect the provided USB charger wire to the tank's Lithium Polymer battery and a suitable USB power source. Charge until the indicator light shows a full charge.
2. Install Remote Control Batteries: Open the battery compartment on the remote control and insert 6x 1.5V AA batteries (not provided), ensuring correct polarity.
3. Install Tank Battery: Carefully open the tank's battery compartment (usually located under the turret or a hatch on the hull). Connect the charged tank battery, ensuring a secure connection. Close the compartment.
4. Add Smoke Liquid (Optional): If using the smoke function, carefully open the smoke unit's cap (refer to the diagram below). Add only one drop of ethylene glycol liquid (not provided) into the smoke unit. Overfilling can cause damage.


Image: Close-up view showing the smoke unit's cap and the process of adding smoke liquid to the tank. Exercise caution to avoid overfilling.

5. Power On and Pair: Turn on the tank's power switch, then turn on the remote control. The remote and tank should automatically pair. If not, refer to the remote control's specific pairing instructions.
6. Attach Decorative Parts: Affix any included decorative parts from the bag to the tank as desired, referring to product images for placement.

Operating Instructions

Familiarize yourself with the remote control layout and functions before operating the tank.

Basic Movement

• Forward/Backward: Use the left joystick (or designated control) to move the tank forward or backward.
• Turning: Use the right joystick (or designated control) to steer the tank left or right. Differential steering allows for realistic tank maneuvers.

Turret and Barrel Control

• Turret Rotation: Use the designated buttons or joystick to rotate the turret 360 degrees.
• Barrel Elevation: Use the designated buttons to move the main barrel up and down, with an approximate range of 30 degrees.

Image: Angled view of the Leopard2A6 RC tank with its main barrel elevated, demonstrating its range of motion.

Firing Mechanism

• BB Pellet Shooting: Load 6mm BB pellets into the designated compartment. Press the firing button on the remote to shoot. The tank features a hull-recoil action and firing sound effects. The shooting range is approximately 20 meters.

Special Features

• Infrared Combat System: The tank is equipped with an infrared combat system, allowing multiple similar tanks to engage in simulated battles without radio interference. Refer to the specific combat system manual for detailed rules.
• Smoking Unit: Activate the smoke unit via the remote control. Smoke output increases as the tank moves faster. Ensure smoke liquid has been added as per setup instructions.
• Sound and Lights: The 7.0 mainboard provides two sound options. Each action is accompanied by realistic mechanical tank sounds. Emulational LED lights enhance realism.

Maintenance

• Cleaning: After each use, gently wipe down the tank with a dry, soft cloth to remove dust and debris. Avoid using water or chemical cleaners.
• Track Inspection: Regularly check the metal tracks, sprocket wheels, and idler wheels for any obstructions or damage. Clean any trapped dirt or small objects.
• Smoke Unit Care: If the smoke unit is not in use for an extended period, ensure it is empty and clean. Only add smoke liquid just before use.
• Battery Storage: Store the Lithium Polymer battery in a cool, dry place, partially charged (around 50%) if not used for a long time. Do not store fully charged or fully discharged.
• General Inspection: Periodically check all screws and connections to ensure they are tight and secure.

Troubleshooting

Specifications

Warranty and Support

Your Heng Long 1/16 7.0 Customized Leopard2A6 RC Tank 3889 comes with a 1-Year Warranty Against Manufacturer Defects.

For technical assistance, troubleshooting, or warranty claims, please contact our professional after-sales team. Our technicians can provide guidance in English through video or text for repairs and support.

For more information and to explore other products, visit the wheelfun Store.