Introduction
The Stealth Cam Connect Cellular Trail Camera is designed to capture high-quality images and transmit them directly to your mobile device. Featuring dual network compatibility (Verizon and AT&T) and a quick QR-code setup via the Stealth Command Pro app, this camera provides real-time updates and flexible monitoring options. This manual provides essential information for proper installation, operation, and care of your device.
Setup Guide
Follow these steps to prepare your Stealth Cam Connect for use:
- Battery Installation: The camera operates on 8 AA batteries (not included). Insert them into the battery case, ensuring correct polarity. For extended power, the included Sol-Pak Solar Battery Pack with 1,000mAh lithium-ion batteries can be connected.
- SD Card Insertion: Insert an SD memory card (up to 32 GB, sold separately) into the designated slot. This card stores all captured images and videos.
- Antenna Attachment: Screw the antenna onto the camera's antenna port until it is tight. Angle the antenna for optimal signal reception based on your camera's placement.
- App Download & Activation: Download the Stealth Command Pro app to your smartphone. Use the app's quick QR-code setup feature to activate your camera and link it to your account. The app will guide you through the cellular network activation process, automatically selecting the strongest AT&T or Verizon signal.
- Physical Mounting: Use the provided strap to secure the camera to a tree or post. The camera's design also allows for a padlock or cable lock for added security.
Front view of the Stealth Cam Connect Cellular Trail Camera with its antenna attached. The camera features a camouflage pattern for discreet outdoor placement.
Side view of the camera, illustrating the secure latch for the battery compartment and the antenna connection point.
Rear view of the camera, highlighting the slots for the mounting strap and the robust casing.
The Stealth Cam Connect camera mounted on a tree, connected to a Sol-Pak Solar Battery Pack for continuous power.
A user interacting with the Stealth Cam Connect camera and its companion smartphone app, demonstrating the remote control and monitoring capabilities.
Operating Instructions
The Stealth Cam Connect offers various operational modes and settings:
- Photo Resolution: Select from 20MP, 8MP, or 4MP for still images. Higher resolutions provide more detail but consume more storage.
- Upload Resolution: Images can be uploaded to the app in Low (640x360) or High (1025x576) resolution.
- Trigger Speed: The camera features a rapid 0.7-second trigger speed to capture fast-moving subjects within its 80ft detection range.
- Burst Mode: Configure the camera to take 1 or 2 images per triggering event.
- Motion Detection & Night Vision: The camera utilizes an image sensor, motion sensor, and night vision capabilities to capture activity day and night.
- Automatic Network Coverage: The camera continuously monitors AT&T and Verizon signal strengths, automatically connecting to the strongest available network for reliable communication.
- App Control: Manage all camera settings, view captured images, and receive real-time alerts directly through the Stealth Command Pro app.
A clear night vision image of a deer, demonstrating the camera's low-light performance.
A daytime image of a turkey, showcasing the camera's ability to capture wildlife in natural light.
Maintenance
To ensure optimal performance and longevity of your Stealth Cam Connect:
- Battery Replacement: Replace all 8 AA batteries when the low battery indicator appears in the app or on the camera's status display.
- SD Card Management: Regularly check the SD card capacity via the app. Format or replace the card as needed to prevent storage issues.
- Solar Panel Care: If using the Sol-Pak Solar Battery Pack, ensure the solar panel is clean and free from debris to maximize charging efficiency.
- Weatherproof Seal: Periodically inspect the camera's weatherproof seals and latches to ensure they are intact and properly closed, protecting internal components from moisture.
- Lens Cleaning: Gently clean the camera lens and sensors with a soft, dry cloth to maintain image clarity.
Troubleshooting
If you encounter issues with your camera, refer to the status codes and common solutions below:
| Status Code/Issue | Description | Solution |
|---|---|---|
| Battery Indicator (Red) | No SD Card or Low Battery | Insert a formatted SD card or replace/recharge batteries. |
| Network Indicator (Red) | Weak Signal or No Active Data Plan | Relocate camera for better signal or activate/renew data plan via app. |
| Account Indicator (Red) | Account Not Found | Verify account details in the Stealth Command Pro app or contact customer support. |
| No Images Captured | Camera not triggering or saving images. | Check motion sensor settings, ensure SD card is inserted and not full, verify battery level. |
| Poor Image Quality | Blurry or unclear images. | Clean the camera lens and ensure the camera is stable and not vibrating. Adjust resolution settings. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Stealth Cam |
| Model Name | Connect Trail Camera |
| Model Number | STC-CNCT-SLP |
| Connectivity Technology | Wireless (Cellular, Wi-Fi) |
| Special Features | Image Sensor, Motion Sensor, Night Vision |
| Indoor/Outdoor Usage | Outdoor |
| Compatible Devices | Smartphone (Android) |
| Mount Type | Tree Mount |
| Color | Mixed (Camouflage) |
| Form Factor | Box |
| Alert Type | Motion Only |
| Effective Still Resolution | 20 MP, 8 MP, 4 MP |
| Connectivity Protocol | Wi-Fi |
| Wireless Technology | Wi-Fi |
| Power Source | Battery Powered, Solar Powered |
| Wattage | 4 watts |
| Batteries Required | Yes (8 AA) |
| Battery Power (Sol-Pak) | 1000 mAh (Lithium-ion) |
| Night Vision | Night Color |
| Antenna Location | External |
| Built-In Media | Trail Camera, External Power Jack, Solar Battery Pack |
| UPC | 888151052525 |
| Manufacturer | GSM Outdoors |
| Video Capture Resolution | 4 MP |
| Video Capture Format | MPEG-4 |
| Focus Type | Auto Focus |
| Item Dimensions | 3 x 2 x 10 inches |
| Item Weight | 3.4 Pounds |
| Unit Count | 1.0 Count |
| GTIN | 888151052525 |
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your product or visit the official Stealth Cam website. Contact information for customer service can typically be found on the manufacturer's website or within the Stealth Command Pro app.