Yaheetech Entryway Console Table with Outlets and USB Ports

1. Important Safety Information

Please read and understand all instructions and safety warnings before assembling and using this product. Failure to follow these instructions may result in injury or damage to the product.

• Keep all small parts and packaging materials away from children.
• Assemble the product on a soft, clean surface to prevent scratches.
• Ensure all connections are secure before use. Periodically check and re-tighten fasteners as needed.
• Do not overload the table or shelves. Refer to the "Specifications" section for weight limits.
• Use the included anti-tipping hardware to secure the table to a wall, especially if children or pets are present.
• Do not expose the power outlet to moisture or liquids.
• Always unplug the power cord from the wall outlet before cleaning or moving the table.
• This product is intended for indoor, residential use only.

Refer to the included Assembly Guide for detailed safety warnings and instructions.

2. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

The package should include:

• Tabletop with integrated drawer slides
• Drawer components (front, back, sides, bottom)
• Side panels with X-shaped reinforcement
• Middle shelf
• Bottom shelf
• Power outlet unit (2 AC outlets, 2 USB ports, switch, 6.5 ft cord)
• Hardware pack (screws, dowels, cam locks, anti-tipping kit, drawer knobs)
• Assembly Guide

Image 2.1: All components and dimensions of the console table.

3. Assembly Instructions

Assembly is recommended for two people. Please follow the steps outlined in the included Assembly Guide. Basic tools such as a screwdriver and hammer are recommended.

3.1. Assembly Video Guide

For a visual guide, please watch the official installation video below. This video demonstrates the step-by-step assembly process for the console table with outlets and USB ports.

3.2. Key Assembly Steps

1. Prepare Components: Lay out all parts and hardware on a clean, soft surface. Identify each piece using the labels in the Assembly Guide.
2. Assemble Drawer: Construct the drawer box using the provided panels and hardware. Ensure the ball-bearing drawer slides are correctly attached to the drawer sides.
3. Attach Drawer Slides to Tabletop: Secure the remaining parts of the ball-bearing drawer slides to the underside of the tabletop.
4. Assemble Side Panels: Attach the X-shaped reinforcement bars to the side panels as indicated in the guide.
5. Connect Shelves: Fasten the middle and bottom shelves to the side panels.
6. Install Power Outlet: Carefully place the power outlet unit into the designated cutout on the middle shelf and secure it with screws.
7. Attach Tabletop: Secure the assembled tabletop to the main frame of the table.
8. Insert Drawer: Slide the completed drawer into the installed drawer slides.
9. Install Drawer Knobs: Attach the drawer knobs to the drawer front.
10. Install Anti-Tipping Hardware: Securely attach the anti-tipping kit to the back of the table and to a wall stud to prevent accidental tipping.

Image 3.2: Details of the drawer slides, power outlet, and structural supports.

Image 3.3: Anti-tipping safety measure for the console table.

4. Operating Instructions (Power Outlet)

This console table features a built-in power outlet with 2 AC outlets and 2 USB ports for convenient charging of electronic devices.

1. Connect to Power: Plug the table's 6.5 ft power cord into a standard wall outlet.
2. Activate Power: Locate the power switch on the outlet unit. Press the switch to turn on the power to the AC and USB ports. A light indicator will confirm the unit is active.
3. Charge Devices: Plug your devices into the available AC outlets (120V/12A, 1500W max) or USB ports (5V/2A).
4. Power Off: When not in use, press the power switch to turn off the outlet unit to conserve energy and for safety.

Image 4.1: Details of the integrated power outlet and USB charging ports.

Note: The middle shelf, where the power outlet is located, can be reversed during assembly to face either direction, allowing for flexible placement and access to the power unit.

Image 4.2: Flexible middle shelf for power outlet accessibility.

5. Maintenance

• Cleaning: Wipe the table surfaces with a damp cloth for general cleaning. For spills, wipe immediately with a dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Dusting: Regularly dust the table with a soft, dry cloth.
• Hardware Check: Periodically inspect all screws, bolts, and fasteners to ensure they are tight. Re-tighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish.
• Avoid Moisture: Keep the table away from excessive moisture and humidity to prevent warping or damage.

6. Troubleshooting

• Table Wobbles:
  • Check that all screws and fasteners are securely tightened.
  • Ensure the table is placed on a level surface. Adjust floor glides if available.
  • Verify that the X-shaped side reinforcements are correctly installed and tightened.
• Drawer Does Not Slide Smoothly:
  • Ensure the drawer slides are properly aligned and installed according to the assembly instructions.
  • Check for any obstructions in the drawer tracks.
  • Apply a silicone-based lubricant to the slides if needed.
• Power Outlet Not Working:
  • Verify the table's power cord is securely plugged into a functional wall outlet.
  • Check if the power switch on the outlet unit is in the "ON" position.
  • Ensure the wall outlet itself is receiving power (test with another device).
  • Do not exceed the maximum wattage (1500W) for the AC outlets.
• Missing or Damaged Parts:
  • Do not attempt to assemble the product. Contact Yaheetech customer support immediately for replacement parts.

7. Specifications

8. Warranty and Support

Yaheetech products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech website.

If you encounter any issues, require replacement parts, or have questions regarding assembly or operation, please contact Yaheetech customer support:

• Online Support: Visit the Yaheetech Store on Amazon for FAQs and contact options.
• Email/Phone: Refer to your product packaging or the Yaheetech website for the most current contact information.

Please have your model number (BY213-C021K-01) and purchase date ready when contacting support.