Introduction
Welcome to the user manual for your OCEANIC+ Underwater Housing. This device is designed to transform your iPhone into a sophisticated underwater camera and dive computer, allowing you to capture stunning photos and videos while providing essential dive data. Please read this manual thoroughly before use to ensure proper operation and safety.
The OCEANIC+ Underwater Housing, designed to integrate your iPhone for underwater photography and dive computing.
Key Features
- Underwater Photo & Video: Transforms your iPhone into an advanced underwater camera with various modes including photo, video, burst, and video screen capture.
- Integrated Dive Computer: Seamlessly integrates with the OCEANIC+ app (developed for Apple Watch Ultra and iPhone) to provide full scuba dive computer functionality.
- Water Tight Seal: Features an automatic vacuum pump for a secure seal and an integrated leak detector for immediate moisture alerts.
- Depth Rating: Certified waterproof to a depth of 196 feet (60 meters).
- Compatibility: Compatible with iPhones running iOS 16 and newer, including iPhone 15 (all), iPhone 14 (all), iPhone 13 (all), iPhone 12 (all), iPhone 11 (all), iPhone Xs, iPhone Xr, iPhone X, iPhone SE (2nd & 3rd gen).
- Digital Color Correction: Advanced algorithms for automatic color correction in photos and videos.
The OCEANIC+ Housing allows your iPhone to function as a comprehensive dive computer.
Overview of the housing's technical capabilities and features.
Package Contents
Verify that all items are present in your package:
- OCEANIC+ Housing unit
- Wrist strap
- USB-C cable
- EVA travel case
- Spares kit (5 x desiccant, 1 x grease pack, 1 x O-ring, 1 x O-ring tool, 2 x rubber pads)
Setup Guide
1. Initial Charge
Before first use, fully charge the internal battery of the OCEANIC+ Housing using the provided USB-C cable. The charging indicator will show progress and completion.
2. App Installation
Download and install the official OCEANIC+ app from the Apple App Store on your compatible iPhone. Ensure your iPhone is running iOS 16 or newer for full functionality.
3. iPhone Compatibility
The housing is compatible with iPhones running iOS 16 or newer. This includes iPhone 15 (all models), iPhone 14 (all models), iPhone 13 (all models), iPhone 12 (all models), iPhone 11 (all models), iPhone Xs, iPhone Xr, iPhone X, and iPhone SE (2nd & 3rd gen).
4. Housing Preparation & iPhone Insertion
- Ensure the housing and your iPhone are clean and dry.
- Open the housing by disengaging the 'Twist lock' mechanism.
- Carefully insert your iPhone into the housing, ensuring it sits securely on the adjustable tabs.
- Close the housing and engage the 'Twist lock'.
- Activate the automatic vacuum pump. The pump will create a tight seal. Wait for the leak detector to confirm a successful seal. Do not proceed if a leak is detected.
- Perform a dry run with your iPhone in the housing to familiarize yourself with the controls and app interface before entering the water.
Detailed view of the housing's components and controls.
Official introduction video for the Oceanic+ Housing, demonstrating its features and setup process.
Operating Instructions
Camera Modes
The OCEANIC+ app provides various camera modes accessible via the housing's Bluetooth keypad:
- Photo: Capture still images.
- Video: Record high-quality underwater video.
- Burst: Take a rapid sequence of photos.
- Video Screen Capture: Capture still images directly from video recordings.
Digital Color Correction
The OCEANIC+ app automatically applies digital color correction filters to enhance the vibrancy and accuracy of your underwater photos and videos, compensating for color loss at depth.
Dive Computer Functionality
When paired with the OCEANIC+ app, your iPhone within the housing functions as a full-featured dive computer. It displays critical dive parameters such as depth, no-decompression limit, dive time, and temperature. The intuitive UI with Bluetooth keypad allows for easy navigation and monitoring of dive metrics.
The iPhone display within the housing shows both camera view and essential dive data.
The housing simplifies complex dive data and camera controls for an intuitive user experience.
Care and Maintenance
- Rinse After Use: After each dive, thoroughly rinse the housing with fresh water to remove salt, sand, or other debris.
- Dry Completely: Allow the housing to air dry completely before opening or storing. Use a soft, lint-free cloth to wipe down surfaces.
- O-Ring Care: Regularly inspect the O-ring for any signs of damage, cracks, or debris. Clean the O-ring and its groove with a soft cloth. Apply a thin layer of the provided silicone grease to the O-ring as needed to maintain its seal. Replace the O-ring if any damage is observed.
- Desiccant Use: Place a desiccant packet inside the housing before closing to absorb any residual moisture and prevent fogging. Replace desiccants as they become saturated (refer to the spares kit).
- Storage: Store the housing in its EVA travel case in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting Common Issues
- Leak Detected: If the leak detector alerts, immediately remove the iPhone and inspect the O-ring and sealing surfaces for debris, damage, or improper seating. Re-clean, re-grease the O-ring, and re-attempt the vacuum seal process. Do not use the housing if a leak persists.
- App Crashes/Freezes: Ensure your iPhone's iOS and the OCEANIC+ app are updated to the latest versions. Restart your iPhone and the app. If issues persist, try reinstalling the app.
- Bluetooth Connectivity Issues: Ensure Bluetooth is enabled on your iPhone and the housing is charged. Try re-pairing the housing with your iPhone via the OCEANIC+ app settings.
- Fogging Inside Housing: This is usually due to humidity. Ensure the housing and iPhone are completely dry before sealing. Use a fresh desiccant packet inside the housing.
- Poor Image Quality: Ensure the housing's lens port is clean and free of smudges or scratches. Verify that the iPhone's camera lens is clean and properly aligned within the housing. Utilize the app's digital color correction features.
Technical Specifications
| Specification | Value |
|---|---|
| Product Dimensions | 7.5 x 4 x 12 inches |
| Item Weight | 1 pounds |
| Item Model Number | 882689170515 |
| Batteries | 1 Lithium Ion batteries required (included) |
| Water Resistance Level | Waterproof (196ft / 60m) |
| Material | Plastic |
| Color | Great White |
| Manufacturer | Oceanic |
| Country of Origin | China |
Warranty and Support
Warranty Information
The OCEANIC+ Underwater Housing is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Oceanic website for detailed warranty terms and conditions.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Oceanic customer support. You can find contact information and additional resources on the official Oceanic website: www.oceanicworldwide.com.
