Dreo DR-HSH019 1500W Portable Electric Space Heater User Manual

Important Safety Instructions

Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• WARNING: To reduce the risk of fire or electric shock, do not use this heater with any solid-state speed control device.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

Product Components

The Dreo DR-HSH019 space heater comes with the following items:

• Dreo DR-HSH019 Space Heater
• Remote Control
• User Manual

Setup and Assembly

The Dreo DR-HSH019 space heater requires minimal setup.

1. Unpack the Heater: Carefully remove the heater and all accessories from the packaging. Retain packaging for future storage.
2. Placement: Place the heater on a firm, level surface. Ensure there are no obstructions within 3 feet (0.9 m) of the front, sides, and rear of the heater.
3. Power Connection: Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.

Operating Instructions

Control Panel

The control panel is located on the top of the heater. It features a digital display and touch-sensitive buttons.

• Power Button (On/Off): Turns the heater on or off.
• Mode Button: Cycles through heat modes (H1, H2, H3) and Fan Only mode.
• Temperature Adjustment (+/-): Adjusts the target temperature in ECO mode (41-95°F).
• Oscillation Button: Activates or deactivates the 70° oscillation function.
• Timer Button: Sets the auto-off timer (0-12 hours).
• Mute/Unmute Button: Toggles button sounds on or off.
• Child Lock Button: Activates or deactivates the child lock function.

Remote Control

The included remote control allows for convenient operation from a distance.

• All functions available on the control panel are also accessible via the remote control.
• The remote allows you to power on/off, adjust temperature, change modes, activate oscillation, set the timer, and mute/unmute sounds.

Heat Modes

The heater offers multiple heat settings to suit your comfort needs:

• H1 (Low Heat): 1000W output.
• H2 (Medium Heat): 1300W output.
• H3 (High Heat): 1500W output.
• ECO Mode: Automatically adjusts heating power to maintain a set temperature (41-95°F) for energy efficiency.
• Fan Only Mode: Circulates air without heating.

Timer Function

Set the heater to automatically turn off after a specified period.

• Press the Timer button to cycle through 1-12 hour settings.
• The display will show the remaining time before shutdown.

70° Oscillation

Distribute warmth evenly across a wider area.

• Press the Oscillation button to activate or deactivate the 70-degree oscillation.

Cleaning and Maintenance

Regular cleaning helps maintain the heater's performance.

• Always unplug the heater before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces.
• Do not use cleaning agents or abrasive materials.
• Clean the air intake filter regularly with a vacuum cleaner attachment to remove dust and debris.
• Ensure the heater is completely dry before plugging it back in.

Storage

When not in use, store the heater in a cool, dry place.

• Unplug the heater and allow it to cool completely.
• Clean the heater as per the maintenance instructions.
• Store the heater in its original packaging or a suitable container to protect it from dust and damage.

Troubleshooting Guide

If your heater is not operating correctly, refer to the following common issues and solutions:

Product Specifications

Warranty and Support

Dreo provides a limited warranty for this product. For detailed warranty information or technical support, please refer to the contact information provided in the original packaging or visit the official Dreo website.

• Customer Service: For any questions or concerns, please contact Dreo customer support.
• Online Resources: Visit the Dreo Store for additional product information and FAQs.