FLEXISPOT 35in Standing Desk Converter User Manual

1. Introduction

The FLEXISPOT 35in Standing Desk Converter is designed to seamlessly integrate into your existing workspace, allowing you to effortlessly switch between sitting and standing positions. This adjustable desk riser promotes a more dynamic work environment, which can contribute to improved comfort and productivity by reducing prolonged sitting.

Key Features:

• Fluid Workspaces: Easily converts any desk into a standing desk for adaptable postures.
• Ergonomic 2-Tier Design: Features a 35-inch wide top tier for monitors (up to 27 inches) and a 12.1-inch deep base tier for keyboards, mice, or 13-inch laptops.
• Flexible Height Adjustment: Smoothly adjusts from 4.7 inches to 19.7 inches using a single-lever gas spring system.
• High Load Capacity: Supports up to 33 lbs on the desktop and 4.4 lbs on the keyboard tray.
• Ready to Use: Ships almost fully assembled, requiring minimal setup.
• Straight Up & Down Movement: Rises and folds vertically within its own footprint, saving space.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or damage to the product.

• Weight Limits: Ensure the total weight on the desktop does not exceed 33 lbs (14.97 kg). The keyboard tray should not exceed 4.4 lbs (2 kg). Overloading can cause instability and damage.
• Operation: Use the height adjustment mechanism with care to avoid injury. Keep hands and fingers clear of moving parts during adjustment.
• Liquids: Keep liquids away from the desk to prevent damage to electronic devices and the desk itself.
• Stability: Place the desk converter on a stable, flat surface. Do not lean heavily on the edges of the desk when it is raised.

3. Components Included

The FLEXISPOT Standing Desk Converter comes with the following components:

• Main Desk Riser Unit (pre-assembled)
• Optional Keyboard Tray
• Instruction Manual

Figure 3.1: Overview of the FLEXISPOT 35in Standing Desk Converter with typical setup.

Figure 3.2: Detailed dimensions and load capacities for the desktop (33 lbs) and keyboard tray (4.4 lbs).

4. Setup

The FLEXISPOT Standing Desk Converter arrives almost fully assembled, making setup quick and easy. The primary step involves attaching the optional keyboard tray.

Attaching the Keyboard Tray:

1. Carefully unpack the main desk riser unit and the keyboard tray from the box.
2. Locate the attachment slots on the underside of the main desk unit and the corresponding connectors on the keyboard tray.
3. Slide the keyboard tray into the slots until it clicks securely into place. Ensure both sides are firmly attached.
4. Verify the keyboard tray is stable before placing any items on it.

Once the keyboard tray is attached, your FLEXISPOT Standing Desk Converter is ready for use. Place it on your existing desk surface.

Figure 4.1: The desk converter is compatible with various desk shapes, including standard and L-shaped desks.

5. Operating Instructions

The FLEXISPOT Standing Desk Converter is designed for intuitive and smooth height adjustments, allowing you to easily transition between sitting and standing.

Adjusting Height:

1. To raise the desk: Locate the single lever on the side of the desk unit. Squeeze the lever and gently lift the desktop to your desired standing height. The gas spring system will assist in the lifting motion.
2. To lower the desk: Squeeze the lever and gently push down on the desktop. Guide it smoothly to your preferred sitting height.
3. Release the lever at any point to lock the desk in place. The desk is designed for straight up and down movement, ensuring it stays within its original footprint.

Always ensure that cables are managed properly to avoid snagging or damage during height adjustments. The desk is stable at all heights, but avoid excessive force or leaning.

Figure 5.1: The desk offers a wide range of height adjustment for optimal ergonomic positioning.

Figure 5.2: The single-lever mechanism allows for quick and easy height adjustments.

6. Maintenance

Proper maintenance will ensure the longevity and smooth operation of your FLEXISPOT Standing Desk Converter.

Cleaning:

• Wipe the desk surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• For the black finish, regular dusting will help maintain its appearance and prevent dust accumulation from being noticeable.

General Care:

• Periodically check all screws and connections to ensure they are tight and secure.
• Keep the gas spring mechanism free from obstructions and debris.
• Avoid placing excessively heavy or sharp objects on the desk that could scratch or dent the surface.

7. Troubleshooting

Here are some common issues and their potential solutions:

8. Specifications

9. Warranty & Support

The FLEXISPOT 35in Standing Desk Converter comes with a Limited Warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your product or visit the official FLEXISPOT website.

Customer Support:

For any questions, technical assistance, or warranty claims, please contact FLEXISPOT customer support directly. You can find more information and contact details on their official store page:

Visit the FLEXISPOT Store