HITWAY BK10 Electric Bike User Manual

1. Setup Guide

This section guides you through the initial assembly and setup of your HITWAY BK10 Electric Bike. For a visual guide, please refer to the official installation video below.

1.1 Unboxing and Accessory Check

Carefully open the outer packaging box and remove all protective film from the bike. Verify that all accessories are complete as shown in the video (0:04 - 0:19).

Ensure all components are present upon unboxing, including the electric bicycle, bike lock, and pump.

1.2 Handlebar Installation and Adjustment

Install the handlebar into the stem and adjust it to your preferred height. Secure the quick-release lever firmly (0:20 - 1:05).

1.3 Front Headlight and Mudguard Installation

Attach the front headlight and mudguard to the front fork using the provided screws and tools (1:06 - 1:50).

1.4 Front Wheel Installation

Carefully install the front wheel into the fork, ensuring the brake rotor aligns correctly with the caliper. Secure it with the quick-release skewer (1:51 - 2:12).

1.5 Rear Mudguard Installation

Install the rear mudguard to protect against splashes (2:13 - 2:45).

1.6 Pedal Installation

Identify the left (L) and right (R) pedals. Thread them into the crank arms and tighten securely with a wrench (2:46 - 3:08).

1.7 Seat Adjustment

Adjust the seat post to an appropriate height for comfortable riding, then secure the quick-release clamp (3:09 - 3:30).

1.8 Handlebar Angle Adjustment

Adjust the angle of the front handlebar for optimal riding posture and control (3:31 - 3:37).

1.9 Bell and Reflector Installation

Install the bell and front reflector on the handlebar for safety and visibility (3:38 - 3:58). Attach the front and rear wheel reflectors to the spokes (3:59 - 4:42).

2. Operating Instructions

Familiarize yourself with the bike's controls and riding modes for a safe and enjoyable experience.

2.1 Power On/Off and Gear Adjustment

Long press the power button on the LCD display to turn the device on or off. Use the "+" and "-" keys to adjust the gears (5:26 - 5:35).

The multi-function smart LCD display provides essential riding information.

2.2 Lighting Control

Double-click the "+" key on the display to turn on or off the front and rear lights (5:36 - 5:39).

2.3 Riding Modes

The HITWAY BK10 offers multiple riding modes to suit your needs:

• Pure Ebike Mode: Full electric power, no pedaling required.
• PAS (Pedal Assist System) Mode: Motor provides assistance as you pedal.
• Classic Pedal Mode: Ride as a traditional bicycle without electric assistance.
• Walk Mode: Provides low-speed assistance for walking alongside the bike.

The bike supports multiple working modes to satisfy various riding needs.

3. Maintenance

Proper maintenance ensures the longevity and performance of your electric bike.

3.1 Battery Care and Replacement

The 48V 12Ah lithium battery is removable for convenient charging. You can charge it directly on the bike or remove it to charge separately. For battery replacement, refer to the video (4:57 - 5:14).

The large capacity removable lithium battery offers flexible charging options.

3.2 General Maintenance Tips

• Regularly check tire pressure and inflate to recommended levels.
• Keep the chain clean and lubricated.
• Inspect brake pads and cables for wear and proper function.
• Clean the bike regularly with a damp cloth, avoiding direct water spray on electrical components.

4. Troubleshooting

This section addresses common issues you might encounter with your electric bike.

4.1 Bike Not Turning On

• Ensure the battery is fully charged and properly inserted.
• Check if the battery is locked into place.
• Verify all electrical connections are secure.

4.2 Motor Not Assisting

• Confirm the bike is in an assist mode (PAS or Pure Ebike).
• Check the battery level on the display.
• Ensure the brake levers are not engaged, as this can cut motor power.

4.3 Brakes Not Effective

• Inspect brake pads for wear and replace if necessary.
• Check brake cable tension and adjust if too loose.
• Ensure brake calipers are properly aligned with the rotors.

5. Specifications

6. Warranty and Support

HITWAY is equipped with a professional customer service team dedicated to assisting you with any questions or concerns regarding your purchase or use of the product. Please contact us if you have any questions, and we will reply within 24 hours to provide a satisfactory answer.

For more information and support, you can visit the official HITWAY resources:

• Official Support Link: https://linktr.ee/HITWAY

HITWAY bikes are UL2849 approved, ensuring high safety standards.