Luqeeg Automatic Chicken Coop Door Controller Instruction Manual

Introduction

Thank you for choosing the Luqeeg Automatic Chicken Coop Door Controller. This device is designed to automate the opening and closing of your poultry house door, providing convenience and enhanced safety for your chickens, ducks, and geese. Featuring both light sensor and timed operating modes, this controller ensures your flock is secured at night and released in the morning without manual intervention. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Safety Information

• Ensure the power adapter is connected to a suitable outdoor-rated electrical outlet.
• Do not expose the controller to extreme temperatures or direct water immersion. The unit is IP44 rated for splash resistance, but not waterproof.
• Keep hands and loose clothing clear of the door mechanism during operation to prevent injury.
• Regularly inspect the string and door for wear and tear. Replace components as needed.
• Always disconnect power before performing any maintenance or adjustments.
• This device is intended for controlling poultry coop doors only. Do not use for other purposes.

Package Contents

Verify that all items are present in your package:

• Automatic Chicken Coop Door Controller Unit
• Power Adapter (US Plug)
• Mounting Screws and Anchors
• Door Lifting String
• Pulleys (may include extra for various setups)
• Instruction Manual

Product Overview

The Luqeeg Automatic Chicken Coop Door Controller features a robust design for reliable outdoor use. Key components and features include:

• IP44 Weatherproof Casing: Protects internal components from splashes and dust.
• High Definition LED Display: Provides clear visibility for programming and status checks.
• Weather-Sealed Buttons: Durable buttons for setting modes and times.
• Powerful and Quiet Motor: Ensures smooth and reliable door operation.
• Dual Power Options: Can be powered by the included external power adapter or 4 AA batteries (not included) for backup during power outages.
• Integrated Light Sensor: Automatically opens at dawn and closes at dusk.
• Programmable Timer: Allows setting specific opening and closing times.

Image: The Luqeeg controller unit highlighting its crystal-clear display, weather-sealed buttons, powerful and quiet motor, and IP44 weatherproof rating.

Image: Dimensions of the controller unit, measuring approximately 12.5cm (4.9in) in height and width, and 9cm (3.5in) in depth.

Setup

Follow these steps to install your automatic chicken coop door controller:

1. Prepare the Door: Ensure your chicken coop door slides smoothly and is not obstructed. The controller operates by lifting the door via a string.
2. Mount the Controller:
   • Choose a suitable location on or near your coop, ensuring it is protected from direct heavy rain and easily accessible for programming.
   • Use the provided screws and anchors to securely mount the controller unit to a sturdy surface.
3. Install Pulleys (if needed):
   • Depending on your coop door design, you may need to install one or more pulleys to guide the lifting string from the controller to the door.
   • Ensure the string path is clear and free of friction points.
   

   Image: Illustrations demonstrating different configurations for routing the door lifting string using pulleys, accommodating various coop door designs.

4. Attach the Lifting String:
   • Thread the provided string through the controller's motor mechanism and any installed pulleys.
   • Securely attach the end of the string to the top of your chicken coop door. Ensure the door is fully closed when the string is taut but not under excessive tension.
   

   Image: The controller unit mounted on a wooden chicken coop, with the lifting string connected to the door, demonstrating a typical installation.

   

   Image: A detailed view of the controller and the string mechanism attached to a coop door, showing the path of the string through the pulleys.

5. Connect Power:
   • Plug the power adapter into the controller and then into a suitable outdoor electrical outlet.
   • For battery backup, open the controller casing (refer to image PT08 for internal view) and insert 4 AA batteries into the battery compartment. Ensure correct polarity.
   

   Image: A close-up view of the battery compartment within the controller, designed to hold 4 AA batteries for backup power.

Operating Modes

The controller offers two primary operating modes: Light Sensor Mode and Timed Mode, which can be combined with manual operation.

Image: Flowchart showing the two main operating modes: Light Sensor Mode for automatic dawn/dusk operation, and Timer + Manual Mode for scheduled and on-demand control.

1. Light Sensor Mode

In Light Sensor Mode, the chicken coop door automatically opens at dawn and closes at dusk. This mode provides a natural and secure environment for your chickens, adapting to seasonal light changes.

• Activation: Refer to the controller's display and buttons to select Light Sensor Mode.
• Adjustment: Some controllers allow adjustment of light sensitivity. Consult the on-screen menu for specific settings.

Image: A visual representation of the controller's function, showing the coop door open during the day and closed at night, with an icon indicating protection against predators like foxes.

2. Timed Mode

Timed Mode allows you to set precise opening and closing times for the chicken coop door. This is useful for maintaining a consistent schedule regardless of natural light conditions or for specific routines.

• Setting Times: Use the well-marked buttons on the controller to navigate the menu and set your desired opening and closing times. The LED display will guide you through the process.
• Manual Override: The controller also supports manual operation, allowing you to open or close the door instantly at any time, overriding the programmed schedule.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your controller:

• Cleaning: Periodically wipe the controller's exterior with a damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
• String Inspection: Check the lifting string for fraying or damage. Replace if necessary.
• Door Movement: Ensure the coop door continues to slide freely without sticking. Lubricate tracks if needed.
• Battery Check: If using battery backup, check the battery level periodically and replace AA batteries as needed.
• Power Connection: Ensure the power adapter connection is secure and free from corrosion.

Troubleshooting

Specifications

Warranty and Support

Specific warranty information for this product is not provided in the available data. Please refer to the retailer's return policy or contact the manufacturer, Luqeeg, directly for warranty details and technical support.

For further assistance or inquiries, please visit the Luqeeg store page on Amazon: Luqeeg Store.