Product Overview
This comprehensive bundle provides everything needed for superior above-ground pool water clarity and cleanliness. It includes the Intex Krystal Clear Sand Filter Pump & Saltwater System for advanced water purification, the Intex Deluxe Pool Maintenance Kit for thorough cleaning, and the Intex Deluxe Wall Mount Surface Skimmer for continuous debris removal.
Image: Complete Intex pool system and maintenance bundle.
Important Safety Instructions
- Always disconnect power before servicing any electrical components.
- Ensure all electrical connections are protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not operate the filter pump or saltwater system if the pool is occupied.
- Keep children away from pool equipment during operation.
- Read and understand all instructions before installation and use.
- Use only manufacturer-specified replacement parts.
Package Contents
1. Intex Krystal Clear Sand Filter Pump & Saltwater System (Model 26679EG QX2600)
- Sand Filter Tank
- Pump Motor
- 6-Way Valve
- Saltwater System Electrolytic Cell
- Pressure Gauge
- Hoses and Connectors
Image: Intex Krystal Clear Sand Filter Pump and Saltwater System.
2. Intex Deluxe Pool Maintenance Kit (Model 28003E)
- Telescoping Aluminum Shaft (110 inches)
- Vacuum Head
- Skimmer Net
- Wall Brush
- 24 feet 7 inch Hose
Image: Components of the Intex Deluxe Pool Maintenance Kit, including vacuum head, skimmer net, and brush.
3. Intex Deluxe Wall Mount Surface Skimmer
- Skimmer Body with Strainer Basket
- Adjustable Mounting Bracket
- Hose and Connector
Image: Components of the Intex Deluxe Wall Mount Surface Skimmer.
Setup and Installation
Sand Filter Pump & Saltwater System:
- Place the sand filter pump on a firm, level surface, at least 2 feet away from the pool.
- Fill the filter tank with the recommended amount of filter sand (120 lbs) or glass filtration media (85 lbs).
- Connect the hoses from the pool's inlet and outlet fittings to the pump and filter system.
- Ensure all connections are secure and leak-free.
- Connect the power cord to a GFCI-protected outlet.
Deluxe Wall Mount Surface Skimmer:
- Attach the adjustable mounting bracket to the skimmer body.
- Mount the skimmer to the sidewall of your Easy Set or Metal Frame pool, ensuring it is securely fastened and the water level is appropriate for skimming.
- Connect the skimmer's hose to the pool's outlet connector, which leads to the filter pump.
Deluxe Pool Maintenance Kit:
- Assemble the telescoping aluminum shaft to the desired length.
- Attach the appropriate cleaning tool (vacuum head, skimmer net, or wall brush) to the end of the shaft.
- For vacuuming, connect the 24-foot 7-inch hose to the vacuum head and the pool's outlet connector (requires a filter pump with minimum 800 GPH flow rate).
Operating Instructions
Sand Filter Pump & Saltwater System:
- Ensure the pool is filled to the proper level and all connections are secure.
- Turn on the filter pump using the power button on the redesigned control panel.
- Select one of the 3 self-clean modes (6/10/14-hour cycles) for the saltwater system. The system will automatically produce chlorine at a rate of 12 g/hr.
- The system includes a 24-hour auto clock cycle for convenient operation.
- The Krystal Clear system utilizes Hydro Aeration Technology to improve circulation and filtration, enhancing water clarity.
Image: Hydro Aeration Technology in action, showing bubbles from the pool's return jet.
Deluxe Pool Maintenance Kit:
- Vacuum: Attach the vacuum head and hose. Submerge the vacuum head to remove air, then connect the hose to the pool's outlet. The filter pump will draw debris from the pool floor through the vacuum.
- Skimmer Net: Use the skimmer net with the telescoping pole to manually remove floating debris from the water surface.
- Wall Brush: Attach the wall brush to the telescoping pole to scrub algae and dirt from pool walls and floor.
Image: A pool brush attached to a pole, cleaning the surface of a pool.
Deluxe Wall Mount Surface Skimmer:
- Once installed and connected to the filter pump, the skimmer will automatically route surface water through its strainer basket.
- Leaves and other floating debris will be caught in the basket before they can sink to the bottom of the pool.
Maintenance and Care
Sand Filter Pump & Saltwater System:
- Regularly backwash the sand filter to clean the sand and maintain filtration efficiency. Refer to the pump's specific instructions for backwash frequency.
- Check the pressure gauge regularly; an elevated reading indicates the need for backwashing.
- Clean the electrolytic cell of the saltwater system periodically to remove mineral buildup.
Deluxe Pool Maintenance Kit:
- Rinse the skimmer net, vacuum head, and wall brush with fresh water after each use.
- Store the telescoping pole and attachments in a dry, shaded area to prevent damage from sun exposure.
Deluxe Wall Mount Surface Skimmer:
- Empty the strainer basket regularly to ensure efficient skimming and prevent clogging.
- On a weekly basis, remove the hose adaptor from the outlet fitting connection to ensure the threaded strainer connector is free from debris, hair, and algae.
- Ensure the cartridge in the filter pump is clean and there is no leakage in the circulation system for optimal skimmer performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow from pump | Clogged filter sand/media; dirty pump impeller; air in system. | Backwash filter; clean pump impeller; bleed air from system. |
| Saltwater system not producing chlorine | Low salt level; dirty electrolytic cell; system error. | Check and adjust salt level; clean cell; consult manual for error codes. |
| Pool water remains cloudy | Insufficient filtration time; improper chemical balance; dirty filter. | Increase filtration time; test and adjust pool chemicals; backwash filter. |
| Skimmer not collecting debris | Full strainer basket; weak pump flow; improper water level. | Empty basket; check pump and filter; adjust pool water level. |
Product Specifications
| Feature | Specification |
|---|---|
| Sand Filter Pump Model | INTEX 26679EG QX2600 |
| Maintenance Kit Model | Intex 28003E |
| Compatible Pool Size (Pump) | 4,800 to 15,000 gallons |
| Pump Flow Rate | 2,650 gal/hr |
| System Flow Rate | 2,150 gal/hr |
| Voltage | 110/120V |
| Max Sanitizer Output (Saltwater System) | 11 grams/hr (chlorine) |
| Sand Capacity | 120 lbs |
| Glass Filtration Media Capacity | 85 lbs |
| Tank Diameter (Pump) | 16-inch |
| Motor Horsepower | 0.75 hp |
| Power Source | Corded Electric |
| Maintenance Kit Hose Length | 24 feet 7 inches |
| Maintenance Kit Pole Length | 110 inches (telescoping) |
| Material | Polypropylene, Plastic |
| Item Weight | 63.49 pounds (total bundle) |
Warranty and Customer Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Intex website. Keep your proof of purchase for any warranty claims. Intex is committed to providing quality products and support.
You can typically find support contact details on the manufacturer's website or by searching for 'Intex customer service'.
