1. Introduction
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your ANJ Electric Power Recliner Chair. Please read this manual thoroughly before use and retain it for future reference.
The ANJ Electric Power Recliner Chair features an adjustable powered headrest, power recline function, USB charging ports, dual cup holders, and hidden arm storage. It is designed for comfort and convenience in various living spaces.
2. Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 350 pounds (158 kg).
- Children and Pets: Keep children and pets away from the chair's moving parts. Ensure they do not play on or around the recliner.
- Power Cord: Ensure the power cord is not pinched, tangled, or placed under the chair where it could be damaged. Disconnect power before cleaning or maintenance.
- Clearance: Maintain adequate clearance around the chair when reclining to prevent obstruction or injury.
- Liquids: Avoid spilling liquids on the control panel or electrical components.
- Assembly: Ensure all parts are correctly assembled and tightened before use.
3. Package Contents
Your ANJ Electric Power Recliner Chair is shipped in three separate boxes. Please ensure all components are present before beginning assembly.
- Box 1: Chair Base and Power Cord
- Box 2: Chair Backrest
- Box 3: Armrests (Left and Right) and User Manual
4. Setup and Assembly
Assembly typically takes 10-15 minutes and requires no additional tools. Follow these steps:
- Unpack Components: Carefully remove all parts from the three boxes.
- Attach Backrest: Slide the chair backrest onto the base until it locks securely into place.
- Attach Armrests: Slide each armrest onto the corresponding side of the chair base until they lock into place.
- Connect Power: Locate the power connection coming from the top of the chair base and connect it to the power cord. Connect the power cord to a wall outlet.
- Connect Armrest Controls: Locate the power connection under the chair base that connects the left armrest controls to the motor. Ensure this connection is secure.
5. Operating Instructions
5.1 Power Recline and Headrest Adjustment
The chair features a one-touch smart control panel located on the side of the armrest for adjusting the recline and headrest positions.
- Recline: Use the dedicated recline buttons to adjust the backrest and footrest simultaneously. Press the forward button to recline backward and the backward button to return to the upright position.
- Headrest: Use the dedicated headrest buttons to adjust the angle of the powered headrest independently for optimal head and neck support.
- Return to Upright: A third button is available to retract both the headrest and footrest to the upright position simultaneously.
5.2 USB Charging Ports
The chair is equipped with USB ports for convenient charging of electronic devices.
- Locate the USB ports on the control panel or within the armrest compartment.
- Connect your device's USB cable to the port to begin charging.
5.3 Arm Storage and Cup Holders
The armrests include hidden storage compartments and dual cup holders.
- Arm Storage: Lift the armrest cover to access the hidden storage compartment, suitable for small items like remote controls or books.
- Cup Holders: Use the integrated cup holders to securely hold beverages.
6. Maintenance
6.1 Cleaning Faux Leather
- Wipe the faux leather surface with a soft, damp cloth.
- For stubborn stains, use a mild soap solution and wipe immediately with a clean, damp cloth, then dry thoroughly.
- Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
6.2 General Care
- Regularly inspect all connections and moving parts to ensure they are secure and functioning correctly.
- Keep the chair away from direct sunlight and heat sources to prevent material degradation.
- Avoid placing sharp objects on the chair's surface.
7. Troubleshooting
- Chair Not Reclining:
- Check if the power cord is securely plugged into both the chair and the wall outlet.
- Ensure the connection between the chair base and the left armrest controls is secure.
- Verify the wall outlet is functional by plugging in another device.
- Headrest Not Adjusting:
- Confirm the main power is connected and the recline function works. If not, refer to 'Chair Not Reclining'.
- Ensure no obstructions are preventing headrest movement.
- USB Ports Not Charging:
- Check if the chair is powered on and the recline function is operational.
- Try a different USB cable or device to rule out cable/device issues.
If issues persist after attempting these troubleshooting steps, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ANJ |
| Model Number | CD0306B3-U011 |
| Color | Red / Black |
| Product Dimensions (D x W x H) | 31"D x 36"W x 41"H |
| Seat Height | 18 Inches |
| Seat Depth | 22 Inches |
| Backrest Height | 27 Inches |
| Maximum Weight Recommendation | 350 Pounds |
| Material | Faux Leather, Foam (Fill Material) |
| Frame Material | FSC-Certified Wood, Steel-Reinforced Frame |
| Special Features | Adjustable Headrest, Arm Rest, Arm Storage, Cup Holders, USB Charge |
| Assembly Time | 10-15 minutes (no tools required) |
9. Warranty Information
ANJ products are manufactured to high-quality standards. For specific warranty details regarding your Electric Power Recliner Chair, please refer to the warranty card included with your purchase or contact ANJ customer support.
10. Customer Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact our customer support team. We are committed to providing satisfactory solutions.
- Online Support: Visit the ANJ Store on Amazon for FAQs and contact options.
- Email: Refer to your product packaging or warranty card for direct email support.
