1. Introduction
This manual provides instructions for the LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, designed for use with children's electric ride-on cars. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance.
2. Package Contents
The package includes the following components:
- Optional Remote Controller or 12V Receiver (depending on your purchase)
Note: This product is suitable for specific children's riding toys. Ensure that the purchased parts have the same appearance and model as your existing parts.
3. Setup and Installation
3.1. Remote Controller Battery Installation
The remote controller requires two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote controller.
- Open the battery compartment cover.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Image: Back view of the remote controller, highlighting the battery compartment. Ensure batteries are inserted with correct polarity.
3.2. Frequency Matching (Pairing)
The remote controller and receiver must be paired before first use or after replacing the remote's batteries. This process establishes a connection between the remote and the electric ride-on car.
- Ensure the electric ride-on car is powered OFF.
- On the remote controller, simultaneously press and hold the Forward and Reverse buttons. The indicator light on the remote will begin to flash.
- While still holding the buttons on the remote, turn ON the power of the electric ride-on car.
- The remote's indicator light will stop flashing, indicating a successful connection.
- Release the Forward and Reverse buttons. The remote control is now ready for use.
Image: Front view of the remote controller, showing the layout of the control buttons including Forward and Reverse.
4. Operation
After successful frequency matching, the remote controller can be used to operate the electric ride-on car. The buttons on the remote typically control movement (forward, reverse, left, right), speed, and other functions depending on the specific car model.
- Use the directional controls (joysticks/buttons) to steer the car.
- Press the Forward button to move the car forward.
- Press the Reverse button to move the car backward.
- Additional buttons may control speed, horn, music, or lights, depending on the car's features. Refer to your electric car's manual for specific button functions.
5. Maintenance
To ensure the longevity and proper functioning of your remote controller and receiver, follow these maintenance guidelines:
- Cleaning: Wipe the remote controller and receiver with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries from the remote controller if it will not be used for an extended period to prevent leakage.
- Avoid Moisture: Keep the remote controller and receiver away from water and other liquids to prevent damage.
6. Troubleshooting
If you encounter issues with your LOOM TREE 2.4G Bluetooth Controller JR1807Rxs Receiver, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not controlling the car. | Not paired correctly or batteries are low/dead. |
|
| Remote indicator light keeps flashing. | Frequency matching failed. | Repeat the frequency matching process carefully (see Section 3.2). Ensure the car is turned on while holding the remote buttons. |
| Intermittent control. | Interference or low battery. |
|
7. Specifications
| Model Number | JR1807Rxs (LTIN61048384) |
| Material | Plastic |
| Remote Controller Dimensions | 14 x 8 x 2.5 cm (5.51 x 3.15 x 0.98 inches) |
| Receiver Dimensions (1816) | 7.5 x 3 x 8 cm (2.95 x 1.18 x 3.15 inches) |
| Receiver Dimensions (JR1816) | 7.6 x 8 x 3 cm (2.99 x 3.15 x 1.18 inches) |
| Receiver Dimensions (Red Chip 12V) | 9 x 8 x 3 cm (3.54 x 3.15 x 1.18 inches) |
| Power Source (Remote) | 2 x AAA Batteries (not included) |
| Recommended Age | 5 - 15 years |
| Country of Origin | Hong Kong |
Image: Remote controller with approximate dimensions (14cm length, 8cm width, 2.5cm height) indicated.
8. Warranty and Support
For product support, inquiries, or warranty information, please contact the manufacturer:
- Manufacturer: CREATIONIAT TECHNOVATION PRIVATE LIMITED
- Customer Care: +91-9311494802
- Email: creationisttechnovation@gmail.com
This product is covered by a 10-day replacement policy. Please refer to your purchase documentation for full details.