Lightbiz LED Wall Lights X120 Instruction Manual

1. Product Overview

The Lightbiz LED Wall Mounted Light is a versatile, rechargeable lighting solution designed for various indoor applications. Featuring a 3000mAh battery, it offers cordless operation, multiple color temperatures, and dimmable brightness levels. Its unique magnetic ball design allows for 360° rotation and easy removal for charging or use as a portable light source.

Figure 1: Lightbiz LED Wall Light X120

Key Features:

• Rechargeable Battery: Built-in 3000mAh battery provides up to 24 hours of light on medium brightness.
• Dual Control: Operate via integrated button or included remote control.
• Adjustable Lighting: Three color temperatures (3000K-4500K-6000K) and dimmable brightness (stepless or 4 preset levels).
• 360° Rotation: Magnetic ball joint allows for flexible light direction and easy detachment.
• Easy Installation: Tools-free installation with strong 3M adhesive or optional screw mounting.

2. What's Included

Your Lightbiz LED Wall Light package contains the following items:

• Lamp body x 1
• Lamp holder x 1
• USB-C Charging Cable x 1
• Remote control x 1
• User manual x 1
• Mounting Hardware (screws and wall anchors)

Figure 2: Detailed view of product components including function button, charging port, strong magnet, iron ball, and 3M adhesive.

3. Setup Instructions

The Lightbiz LED Wall Light offers two primary installation methods: adhesive mounting for smooth surfaces or screw mounting for enhanced stability.

3.1 Adhesive Mounting

1. Ensure the installation surface is clean, flat, and smooth. This is crucial for optimal 3M adhesive performance.
2. Tear off the protective film from the 3M adhesive on the back of the lamp holder.
3. Firmly press the lamp holder onto the desired wall surface for at least one minute.
4. Allow the adhesive to bond for a minimum of 4 hours before attaching the lamp body.
5. Once bonded, use the magnetic connection to attach the lamp body to the holder.

3.2 Screw Mounting

For surfaces that are not smooth or clean, or for a more permanent fixture, screw mounting is recommended.

1. Position the lamp holder on the desired surface and mark the screw hole locations.
2. Drill pilot holes if necessary, then secure the lamp holder to the wall using the provided screws and wall anchors.
3. Attach the lamp body to the secured holder using the magnetic connection.

Figure 3: Illustration of magnetic ball design and two installation methods: adhesive and screw mounting.

4. Operating Instructions

The Lightbiz LED Wall Light can be controlled directly via its integrated button or with the included remote control.

4.1 Button Control

• Power ON/OFF: Single press the function button to turn the light on or off.
• Color Temperature Switching: Short press the button to cycle through 3000K (Warm Light), 4500K (Natural Light), and 6000K (Cool Light).
• Stepless Dimming: Long press the button to continuously adjust brightness from 10% to 100%. Release when desired brightness is reached.

4.2 Remote Control

The remote control provides full functionality for convenient operation.

• Power ON/OFF: Use the 'ON' and 'OFF' buttons.
• Color Temperature: Select from Warm Light (3000K), Natural Light (4500K), or Cool Light (6000K) buttons.
• Brightness Adjustment: Use '+' and '-' buttons for stepless dimming, or select preset levels (10%, 40%, 80%, 100%).
• Timing Function: Set the light to automatically turn off after 10, 30, 60, or 120 minutes.

Figure 4: Button control for color temperature switching and stepless brightness adjustment.

Figure 5: Remote control functions including ON/OFF, color temperature, brightness, and timing.

4.3 360° Rotation

The magnetic ball joint allows the lamp body to rotate freely, enabling you to direct the light precisely where needed. The lamp can also be easily detached from its base for use as a portable light or flashlight.

Figure 6: Examples of the Lightbiz LED Wall Light used as a bedside lamp, gallery light, step light, and reading light.

5. Maintenance

5.1 Charging the Battery

The built-in 3000mAh battery is rechargeable via the USB-C port. A full charge typically takes about 4 hours.

• Charging Indicator: A red light indicates the unit is charging.
• Fully Charged Indicator: A green light indicates the unit is fully charged.

To charge, simply detach the lamp body from its magnetic base and connect the provided USB-C cable to a compatible power source.

6. Troubleshooting

• Light not adhering to wall: Ensure the surface is clean, flat, and smooth before applying the 3M adhesive. Allow at least 4 hours for the adhesive to bond before attaching the lamp body. Wet weather, uneven walls, or dust can affect bonding performance. Consider using screw mounting for a more secure installation.
• Light not turning on/off or changing settings: Check if the battery is charged. If using the remote, ensure there are no obstructions between the remote and the light.
• Light not bright enough: Adjust brightness using the button (long press) or remote control (buttons '+' / '-' or preset levels). Ensure the light is fully charged.

7. Specifications

8. Warranty & Support

The Lightbiz LED Wall Light Model X120 comes with a Lifetime Warranty.

For product support, troubleshooting assistance, or warranty claims, please contact Lightbiz customer service through the retailer where the product was purchased or visit the official Lightbiz website.