1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your BOYI 61 Pro Mini Tri-Mode Mechanical Keyboard. This compact 60% layout keyboard features 61 keys, RGB backlighting, PBT XDA keycaps, N-key rollover (NKRO), and offers versatile connectivity options including wired (USB-C), 2.4GHz wireless, and Bluetooth 5.0. It is designed for both gaming and general computing tasks.
Image 1.1: Top-down view of the BOYI 61 Pro Mini Mechanical Keyboard.
2. Package Contents
Verify that all items are present in the package:
- BOYI 61 Pro Mini Mechanical Keyboard
- USB-C Cable
- 2.4GHz Wireless Receiver (USB dongle)
- Keycap Puller
- Switch Puller
- Extra Switches (Quantity may vary)
- User Manual (This document)
3. Setup
3.1 Charging the Keyboard
Before initial use, it is recommended to fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a USB wall adapter. The charging indicator (usually located near the USB-C port or on the spacebar) will illuminate during charging and turn off when fully charged.
Image 3.1: Side view of the keyboard highlighting the USB-C charging port.
Image 3.2: Battery life estimates: up to 220 hours without lights, 24 hours with lights on.
3.2 Connecting the Keyboard
The BOYI 61 Pro Mini supports three connection modes: Wired, 2.4GHz Wireless, and Bluetooth 5.0.
3.2.1 Wired Mode
- Ensure the keyboard's power switch (located on the back) is in the OFF position.
- Connect the provided USB-C cable to the keyboard and your computer's USB port.
- The keyboard will automatically be recognized by your operating system.
3.2.2 2.4GHz Wireless Mode
- Locate the 2.4GHz wireless receiver (USB dongle) in the keyboard's packaging.
- Plug the 2.4GHz receiver into an available USB port on your computer.
- Turn the keyboard's power switch to the ON position.
- Press Fn + R to switch to 2.4GHz wireless mode. The indicator light will flash to confirm pairing.
- The keyboard should connect automatically.
3.2.3 Bluetooth Mode
The keyboard supports connecting up to three Bluetooth devices.
- Turn the keyboard's power switch to the ON position.
- Press Fn + Q, Fn + W, or Fn + E to select a Bluetooth channel. The corresponding key will flash rapidly, indicating it's in pairing mode.
- On your device (computer, tablet, smartphone), enable Bluetooth and search for new devices.
- Select "BOYI 61 Pro Mini" from the list of available devices to pair.
- Once paired, the indicator light will stop flashing and remain solid for a few seconds.
- To switch between paired Bluetooth devices, press Fn + Q, Fn + W, or Fn + E.
Image 3.3: The keyboard supports connecting to multiple devices via its three modes.
4. Operating Instructions
4.1 Function Key Combinations
The 61 Pro Mini keyboard utilizes the Fn key to access secondary functions printed on the keycaps.
| Combination | Function |
|---|---|
| Fn + 1! | F1 |
| Fn + 2@ | F2 |
| Fn + 3# | F3 |
| Fn + 4$ | F4 |
| Fn + 5% | F5 |
| Fn + 6^ | F6 |
| Fn + 7& | F7 |
| Fn + 8* | F8 |
| Fn + 9( | F9 |
| Fn + 0) | F10 |
| Fn + -= | F11 |
| Fn + =+ | F12 |
| Fn + Q/W/E | Switch Bluetooth device 1/2/3 |
| Fn + R | Switch to 2.4GHz Wireless Mode |
| Fn + T | Switch to Wired Mode |
| Fn + Y | Print Screen |
| Fn + U | Scroll Lock |
| Fn + I | Pause Break |
| Fn + J | Insert |
| Fn + K | Home |
| Fn + L | Page Up |
| Fn + M< | Delete |
| Fn + ,> | End |
| Fn + .? | Page Down |
| Fn + Alt + T | Change RGB lighting mode |
| Fn + [ { | Decrease light effect speed |
| Fn + ] } | Increase light effect speed |
| Fn + ; : | Decrease brightness |
| Fn + ' " | Increase brightness |
Image 4.1: Key combinations for adjusting RGB lighting effects.
4.2 RGB Lighting Control
The keyboard features 10 different RGB lighting modes and interactive customizable game modes.
- Change Mode: Press Fn + Alt + T to cycle through the available RGB lighting modes.
- Adjust Brightness: Use Fn + ; : to decrease brightness and Fn + ' " to increase brightness.
- Adjust Speed: Use Fn + [ { to slow down the lighting effect and Fn + ] } to speed it up.
4.3 Ergonomic Design
The keyboard is designed with two adjustable feet to provide ergonomic typing angles. You can choose between a 4° or 7° tilt to reduce wrist fatigue during extended use.
Image 4.2: Adjustable feet for 4° and 7° typing angles.
5. Maintenance
5.1 Cleaning the Keyboard
- Disconnect the keyboard from all power sources and devices before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and casing.
- For dust and debris between keys, use compressed air.
- Avoid using harsh chemicals, abrasives, or solvents as they may damage the keyboard's finish.
5.2 Hot-Swapping Switches
The BOYI 61 Pro Mini features hot-swappable switches, allowing you to change mechanical switches without soldering. It supports most 3-pin/5-pin MX-similar mechanical switches (e.g., Gateron, Cherry).
- Using the provided keycap puller, carefully remove the desired keycap by pulling straight up.
- Using the provided switch puller, grip the switch firmly from the top and bottom clips and pull straight up to remove it from the PCB.
- Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
- Gently press the new switch into place until it clicks securely.
- Re-attach the keycap.
Image 5.1: Illustration of hot-swapping mechanical switches.
6. Troubleshooting
- Keyboard not responding:
- Ensure the keyboard is charged.
- Check the power switch on the back of the keyboard is ON.
- Verify the correct connection mode (Wired, 2.4GHz, or Bluetooth) is selected using Fn key combinations.
- For wired mode, try a different USB port or cable.
- For 2.4GHz mode, ensure the receiver is securely plugged in and try re-pairing (Fn + R).
- For Bluetooth mode, ensure Bluetooth is enabled on your device and try re-pairing (Fn + Q/W/E).
- RGB lighting not working or stuck:
- Ensure the keyboard is charged.
- Try cycling through lighting modes using Fn + Alt + T.
- Adjust brightness using Fn + ; : and Fn + ' ".
- Keys not registering or double-typing:
- This could indicate a faulty switch. Try hot-swapping the affected switch with one of the spare switches provided or a known working switch.
- Ensure the switch is fully seated in the PCB.
- Bluetooth connection unstable:
- Ensure your device is within range (typically 10 meters).
- Minimize interference from other wireless devices.
- Try unpairing and re-pairing the keyboard with your device.
7. Specifications
| Feature | Detail |
|---|---|
| Model | BOYI 61 Pro Mini |
| Layout | 60% (61 Keys) |
| Connectivity | Wired (USB-C), 2.4GHz Wireless, Bluetooth 5.0 |
| Switches | Gateron Red (Hot-swappable, 3-pin/5-pin compatible) |
| Keycaps | PBT XDA Profile |
| Backlighting | RGB (Multiple modes) |
| Anti-Ghosting | N-Key Rollover (NKRO) in wired mode |
| Battery | 1 Lithium Ion battery required |
| Dimensions (L x W x H) | 11.8 x 4.2 x 1.5 inches (301mm x 107mm x 38mm) |
| Weight | 1.94 pounds (approx. 0.88 kg) |
| Compatible Devices | PC, Mac, Android, iOS (via Bluetooth) |
Image 7.1: Keyboard dimensions and key features.
8. Warranty and Support
For warranty information and technical support, please refer to the official BOYI website or contact customer service through your purchase platform.
You can typically find support by visiting the seller's page on the platform where you purchased the product and using the "Ask a question" feature.
Image 8.1: Contact information for customer support.
