ROCAM Alarm Clock Radio User Manual

Introduction

Thank you for choosing the ROCAM Alarm Clock Radio. This versatile device combines an alarm clock, FM radio, Bluetooth speaker, USB charger, and a warm night light, offering a comprehensive solution for your bedside needs. This manual provides detailed instructions to help you set up and operate your new device effectively.

ROCAM Alarm Clock Radio in white, showing the digital time 11:25 AM and a warm yellow night light.

Figure 1: ROCAM Alarm Clock Radio Overview

Features of the digital alarm clock radio including 5.0 Bluetooth, FM 87.5-108MHz, Touch Control, Warm Night Light, and Buzzer/FM alarm options.

Figure 2: Key Features of the ROCAM Alarm Clock Radio

Setup

Power Connection

Connect the provided Type-C USB cable to the power input port on the back of the alarm clock and plug the other end into a compatible USB power adapter (not included) or a Type-C power source. The device will power on automatically.

The alarm clock radio with Type-C and USB charging ports, showing a phone and earbuds charging.

Figure 3: Type-C and USB Charging Ports

Setting the Time

The clock features a clear, large digital display for easy readability. You can switch between 12-hour, 24-hour, and Daylight Saving Time (DST) formats.

Press the Time 12/24 button to cycle through 12-hour, 24-hour, and DST modes.
To adjust the time, press and hold the Time 12/24 button until the hour digits flash.
Rotate the Time/Tune knob (left knob) to adjust the hour.
Press the Time 12/24 button again to switch to minute adjustment.
Rotate the Time/Tune knob to adjust the minutes.
Press the Time 12/24 button once more to confirm and exit time setting mode.

Close-up of the alarm clock radio showing touch controls, USB and Type-C ports, and examples of 12-hour, 24-hour, and DST time formats.

Figure 4: Time Setting Controls and Display Formats

Three alarm clocks displaying 12H, 24H, and DST time formats.

Figure 5: 12H, 24H, and DST Time Formats

Operating Instructions

Alarm Function

The alarm clock allows you to set an alarm with either a buzzer sound or your last played FM radio station.

Press the Alarm button to enter alarm setting mode. The alarm time will flash.
Rotate the Time/Tune knob to adjust the alarm hour.
Press the Alarm button again to switch to minute adjustment.
Rotate the Time/Tune knob to adjust the alarm minutes.
Press the Alarm button once more to confirm the alarm time.
After setting the time, you can choose the alarm sound: press the Alarm button repeatedly to cycle between Buzzer and FM Radio. An icon will indicate your selection.
To adjust the alarm volume (1-16 levels), rotate the Volume/Scan knob (right knob) while the alarm is sounding or during alarm setup.
To snooze, press the SNOOZE/LIGHT button when the alarm sounds.
To turn off the alarm, press any button other than SNOOZE/LIGHT.

An alarm clock radio on a bedside table, showing options to wake up to FM Radio or Buzzer, with a volume slider from Level 1 to Level 16.

Figure 6: Alarm Sound and Volume Settings

FM Radio Operation

The built-in FM radio allows you to listen to your favorite stations. It supports automatic and manual station searching and can store up to 20 presets.

Press the Power Mode button to switch to FM Radio mode. The frequency will be displayed.
To auto-scan and save stations, press and hold the Play/Scan button. The radio will scan and store available stations automatically.
To manually tune, rotate the Time/Tune knob to find your desired frequency.
To cycle through saved presets, press the Preset/Pair button.
Adjust the volume by rotating the Volume/Scan knob.

Digital alarm clock with radio features: FM Radio 87.5-108MHz, Auto/Manual Search, Preset 20 Radio Stations, FM Signal Improve Antenna.

Figure 7: FM Radio Features

Video 1: Demonstrates the Alarm Clock FM Radio with Bluetooth functionality, including setting time, adjusting brightness, and switching between modes.

Bluetooth Speaker Function

Connect your smartphone or other Bluetooth-enabled devices to the alarm clock to enjoy your music wirelessly.

Press the Power Mode button to switch to Bluetooth mode. The display will show "bt" and a blinking Bluetooth icon, indicating it's ready for pairing.
On your device, enable Bluetooth and search for "ROCAM Clock Radio" (or similar name).
Select the device to pair. Once connected, the Bluetooth icon will stop blinking.
You can now play music from your device through the alarm clock's speaker.
Adjust volume using the Volume/Scan knob on the clock or your connected device.

A ROCAM alarm clock radio on a table with a smartphone playing music, illustrating the Bluetooth speaker function.

Figure 8: Bluetooth Speaker in Use

A smartphone connected via Bluetooth to the alarm clock radio, with a 10M range indicator.

Figure 9: Enjoy Music via Bluetooth

The speaker features a professional sound chamber design with a high magnetic speaker, 40*70mm bass diaphragm, and superior bass resonance for an immersive audio experience.

An exploded view of the alarm clock radio showing internal components like the high magnetic speaker, sealed acoustic chamber, 40*70mm bass diaphragm, and superior bass resonance.

Figure 10: Immersive Audio Experience with Powerful Sound and Deep Bass

An X-ray view of the alarm clock radio highlighting the professional sound chamber design.

Figure 11: Professional Sound Chamber Design

Night Light and Display Dimmer

The alarm clock features a warm yellow night light and adjustable display brightness to suit your preference.

To turn the night light on/off, press the SNOOZE/LIGHT button.
To adjust the display brightness (5 levels from 5% to 100%), press the Dimmer/DST button repeatedly.

An alarm clock radio on a bedside table showing five levels of display dimming from 5% to 100% brightness.

Figure 12: 5-Level Dimming for Display Brightness

An alarm clock radio on a bedside table with its warm yellow night light illuminated, creating a cozy ambiance.

Figure 13: Eye-Friendly Night Light

Charging Other Devices

The alarm clock is equipped with both Type-C and standard USB charging ports, allowing you to conveniently charge your phone, earphones, and other compatible devices.

Locate the USB and Type-C ports on the back of the device.
Connect your device's charging cable to the appropriate port on the alarm clock.
Ensure the alarm clock is powered on for charging functionality.

Maintenance

Cleaning: Use a soft, dry cloth to clean the surface of the alarm clock. Do not use liquid cleaners or abrasive materials.
Storage: If storing the device for an extended period, disconnect it from power and keep it in a cool, dry place.
Handling: Avoid dropping the device or exposing it to extreme temperatures or humidity.

Troubleshooting

Problem	Possible Cause	Solution
Device does not power on.	No power connection or faulty adapter.	Ensure the Type-C cable is securely connected and the power adapter is working. Try a different USB port or adapter.
FM radio static or poor reception.	Weak signal or interference.	Adjust the position of the device or the antenna. Try auto-scanning for stations again. Avoid placing near other electronic devices that may cause interference.
Bluetooth not pairing.	Device not in pairing mode or too far.	Ensure the alarm clock is in Bluetooth mode ("bt" displayed and blinking). Move your device closer to the alarm clock. Forget the device on your phone's Bluetooth settings and try pairing again.
Alarm not sounding.	Alarm not set or volume too low.	Verify the alarm time is correctly set and activated. Check the alarm volume level (U01-U16).
Display too bright/dim.	Brightness setting needs adjustment.	Press the Dimmer/DST button to cycle through brightness levels.

Specifications

Feature	Detail
Brand	ROCAM
Model Number	LUCY-CR1025-W
Display Type	Digital
Power Source	Corded Electric
Product Dimensions	6.61"W x 2.32"H
Item Weight	11.4 ounces
Special Features	Bluetooth, Touch Button, Night Mode, FM Radio, Type C & USB Charging
Bluetooth Version	5.0
FM Frequency Range	87.5-108MHz
Alarm Volume Levels	1-16
Display Brightness Levels	5 (5% to 100%)

Warranty and Support

ROCAM products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided on the product packaging or visit the official ROCAM website.

Please retain your proof of purchase for any warranty claims.

	ROCAM CR1025 FM & Bluetooth Clock Radio User Manual Comprehensive user manual for the ROCAM CR1025 FM & Bluetooth Clock Radio, detailing setup, features like alarm, DST, Bluetooth connectivity, FM radio, and charging capabilities.
	ROCAM CR1024 Calendar Alarm Clock with Time Projection User Manual Comprehensive user manual for the ROCAM CR1024 Calendar Alarm Clock, detailing its features including time projection, alarm settings, date configuration, DST function, brightness control, temperature/humidity monitoring, night light, and device charging capabilities.
	ROCAM CR1001eM Alarm Clock with Vibrator User Manual User manual for the ROCAM CR1001eM Alarm Clock with Vibrator, detailing its features, setup, and operation for heavy sleepers.
	ROCAM CR1001E Alarm Clock with USB Charger User Manual User manual for the ROCAM CR1001E digital alarm clock with USB charger. This guide details how to set time and alarms, adjust display brightness, use Daylight Saving Time (DST) features, and utilize the USB charging port. Includes information on power resources and control locations.
	ROCAM CR1008i Digital LED Alarm Clock with Bed Shaker User Manual User manual for the ROCAM CR1008i Digital LED Alarm Clock with Bed Shaker. Learn how to set time, alarms, use the bed shaker, night light, and understand warranty information.
	ROCAM CR1008 Digital LED Alarm Clock User Manual User manual for the ROCAM CR1008 Digital LED Alarm Clock. This guide provides instructions on setting up, operating features like time and alarm setting, dimmer, night light, DST, USB charging, and warranty information.

ROCAM LUCY-CR1025-W