Poolcandy PC1035BBY
Poolcandy Remote Controlled Motorized Baby Splash Runner User Manual
Model: PC1035BBY
Brand: Poolcandy
Introduction
Thank you for choosing the Poolcandy Remote Controlled Motorized Baby Splash Runner. This manual provides essential information for the safe and proper setup, operation, and maintenance of your new pool float. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Information
WARNING: This is not a life-saving device. Always provide constant supervision to children in and around water. Never leave a child unattended while using this product.
- For ages 1 to 4 years.
- Maximum weight limit: 30 pounds.
- Ensure the float is fully inflated before placing a child inside.
- Do not over-inflate.
- Keep away from sharp objects and heat sources.
- Only use in water where the child is within their depth and under adult supervision.
- Inspect the product for damage before each use. Do not use if damaged.
Package Contents
- 1 x Motorized Baby Splash Runner Float
- 1 x Waterproof Remote Control
- 1 x Repair Patch Kit
- 1 x Instruction Manual (this document)
Setup
1. Inflation
Locate the air valves on the float. Use an air pump (not included) to inflate the float until it is firm to the touch but not rigid. Ensure all valves are securely closed after inflation to prevent air leakage.
2. Battery Installation
The float requires 6 D-Cell batteries, and the remote control requires 2 AAA batteries (batteries not included).
- For the Float: Locate the battery compartment on the underside of the float. Unscrew the cover, insert 6 D-Cell batteries according to the polarity indicators (+/-), and securely replace the cover. Ensure the cover is tightly sealed to maintain waterproofing.
- For the Remote Control: Locate the battery compartment on the back of the remote. Open the cover, insert 2 AAA batteries according to the polarity indicators (+/-), and securely replace the cover.
Always use new batteries and ensure they are installed correctly. Do not mix old and new batteries or different types of batteries.
Operation
1. Placing the Child in the Float
Carefully place the child into the float, ensuring their legs are comfortably positioned through the leg holes. The float is designed with leg holes to hold your baby securely in place. Always ensure the child is seated upright and stable.
Image: A young child seated in the Poolcandy Baby Splash Runner float, ready for use in the pool.
2. Using the Remote Control
The remote control allows you to steer and move the float from a distance. It is waterproof and designed to float. The remote works up to 75 feet away.
Image: A child's hand interacting with the remote control buttons on the float.
Image: An adult in the pool operating the remote control for the Baby Splash Runner, with a child enjoying the ride.
- The remote has buttons for forward, backward, left, and right movement.
- Press and hold the desired direction button to move the float.
- The propellers are housed in a protected, child-safe casing on the underside of the float.
Image: The underside of the float, highlighting the protected propeller housing.
3. Official Product Video
Video: This video demonstrates the Poolcandy Baby Runner motorized kids pool float in action, showing how parents can control the float with a remote while their child enjoys the ride in the pool. It highlights the ease of use and the fun experience for both child and parent.
Maintenance
1. Cleaning
After each use, rinse the float with fresh water to remove chlorine or salt. Wipe it down with a soft cloth and mild soap if necessary. Do not use harsh chemicals or abrasive cleaners.
2. Drying and Storage
Ensure the float is completely dry before deflating and storing. Store in a cool, dry place away from direct sunlight and extreme temperatures. Remove all batteries from both the float and the remote control if storing for an extended period to prevent corrosion.
3. Repairing Punctures
In case of a small puncture, use the included repair patch kit. Clean and dry the area around the puncture, apply the patch firmly, and allow it to cure for several hours before re-inflating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Float not moving or moving slowly. | Low batteries in float or remote; Obstruction in propellers; Water in battery compartment. | Replace batteries; Check and clear propellers; Ensure battery compartment is sealed and dry. |
| Remote control not responding. | Low batteries in remote; Out of range; Interference. | Replace remote batteries; Move closer to the float (within 75 ft); Try in a different area. |
| Float losing air. | Valve not closed properly; Puncture. | Ensure valves are tightly sealed; Locate puncture and use repair patch kit. |
Specifications
- Brand: Poolcandy
- Model Name: Remote Control Motorized Baby Runner Boat
- Model Number: PC1035BBY
- UPC: 814092024956
- Material: Heavy Duty PVC Plastic
- Color: Blue
- Product Dimensions (LxW): 35.43" x 24"
- Item Weight: 4 Pounds
- Age Range: 1 to 4 years
- Weight Limit: 30 Pounds
- Special Features: Waterproof Remote Control, Motorized Baby Boat, Protected Propeller Housing
- Power Source: 6 D-Cell batteries (float), 2 AAA batteries (remote) - not included
Warranty and Support
The Poolcandy Baby Runner Motorized Pool Lounger comes with a 60-day warranty, delivering unrivaled confidence in your purchase by B&D Group. For any support inquiries or warranty claims, please contact the manufacturer directly through their official channels or refer to your purchase documentation for contact information.
Related documentsPC1035BBY
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.