Introduction
Thank you for choosing the iRV Technologies IRV2.5WS 6.5" RV Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Front view of the IRV2.5WS RV Speaker, showcasing its white metal grille and compact design.
Product Features
The IRV2.5WS speaker is designed for high-performance audio in various environments, including RVs, cars, homes, and offices. Key features include:
- High-Performance Sound: Dual cone design for deep bass and clear audio, with a sensitive 89 dB design and a 145-10kHz frequency range.
- Easy Installation: Designed for straightforward integration into various applications with its rugged white metal grille and 4-ohm impedance.
- Powerful Output: Delivers up to 50 watts of power, featuring a 5.4oz magnet weight and ¾” voice coil diameter for an optimized audio experience.
- Durable Construction: Crafted from sturdy, rigorously tested components for long-lasting, crystal-clear audio performance.
- Attractive Design: Features a clean white metal grille that blends seamlessly with most interiors.
Image: The IRV2.5WS speaker with callouts emphasizing its easy installation, attractive white metal grille, and durability for RV living.
What's in the Box
Upon opening your product packaging, please ensure all the following components are present:
- IRV2.5WS 6.5" RV Speaker (1 unit)
Note: Mounting hardware (screws, wires) may not be included and should be sourced separately based on your installation needs.
Setup and Installation
The IRV2.5WS speaker is designed for easy installation. Follow these general guidelines for a successful setup:
- Choose a Location: Select a suitable mounting location that provides adequate space for the speaker's dimensions (approximately 6.2"W x 6.2"H x 2"D) and allows for proper sound dispersion. Ensure the surface is stable and can support the speaker's weight.
- Prepare the Opening: If installing in a recessed area, carefully cut an opening that matches the speaker's mounting diameter. Refer to the speaker's dimensions for precise measurements.
- Wiring: Connect the speaker wires from your audio source (e.g., car stereo, amplifier) to the speaker terminals. Ensure correct polarity (positive to positive, negative to negative) for optimal sound quality. The speaker has a 4-ohm impedance.
- Mounting: Secure the speaker in place using appropriate screws or mounting clips. Ensure it is firmly seated to prevent vibrations and ensure clear sound.
- Test: Once installed, connect your audio source and test the speaker's functionality. Adjust audio settings as needed.
Image: A detailed diagram illustrating the dimensions of the IRV2.5WS speaker, including its diameter and depth, crucial for proper installation.
Operating Instructions
The IRV2.5WS speaker operates as a passive audio component, meaning it requires an external amplifier or audio source to produce sound. Once properly installed and connected:
- Power On Audio Source: Turn on your connected audio system (e.g., car stereo, home receiver).
- Adjust Volume: Start with a low volume level and gradually increase it to your desired listening level.
- Audio Settings: Use your audio source's equalizer or sound settings to fine-tune the bass, treble, and balance for optimal sound reproduction.
- Avoid Overdriving: Do not exceed the speaker's maximum power rating of 50 watts to prevent damage. If you hear distortion, reduce the volume.
Maintenance
To ensure the longevity and optimal performance of your IRV2.5WS speaker, follow these simple maintenance tips:
- Cleaning: Gently wipe the speaker grille and frame with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or components.
- Dust Removal: Use a soft brush or a vacuum cleaner with a brush attachment on a low setting to remove dust from the grille.
- Environmental Protection: While durable, the speaker is not waterproof. Avoid exposing it to excessive moisture, direct sunlight for prolonged periods, or extreme temperatures.
- Connection Check: Periodically check the wiring connections to ensure they are secure and free from corrosion.
Troubleshooting
If you encounter issues with your IRV2.5WS speaker, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound |
|
|
| Distorted Sound |
|
|
| Intermittent Sound |
|
|
If the problem persists after trying these solutions, please contact iRV Technologies customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Name | IRV2.5WS |
| Speaker Type | Coaxial Speaker |
| Speaker Size | 6.5 Inches |
| Power Rating | 50 Watts (Maximum Output Power) |
| Impedance | 4 Ohms |
| Sensitivity | 89dB |
| Frequency Range | 145-10kHz |
| Resonance Frequency | 150Hz |
| Voice Coil Diameter | ¾” |
| Voice Coil Material | Paper |
| Magnet Weight | 5.4oz |
| Product Dimensions (D x W x H) | 2"D x 6.2"W x 6.2"H |
| Color | White |
| Material | Metal (Grille) |
| Recommended Uses | For Vehicles (Car, Home, Office) |
| Manufacturer | iRV Technologies |
Warranty and Support
The IRV2.5WS speaker comes with a Limited Warranty from iRV Technologies. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your purchase or visit the official iRV Technologies website.
For technical support, troubleshooting assistance, or warranty claims, please contact iRV Technologies customer service. Contact information can typically be found on the product packaging or the manufacturer's official website.
Please retain your proof of purchase for warranty purposes.
