1. Introduction
This manual provides essential instructions for the assembly, safe operation, and proper maintenance of your Modway Parity Boucle Bar Stools. These mid-century inspired bar stools are designed for comfort and style, featuring textured boucle fabric upholstery, dense foam padding, and durable powder-coated metal sled bases. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Modway Parity Boucle Bar Stools (Set of 2) in a room setting.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Always read and follow all instructions carefully before assembly and use.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Ensure all connections are secure before using the stools. Periodically check and tighten hardware.
- Do not exceed the maximum weight limit of 330 lbs (150 kg) per stool.
- Do not stand on the stools. Use them only for seating.
- Place stools on a flat, stable, and level surface to prevent tipping.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Modway customer support immediately.
- 2 x Upholstered Bar Stool Seats with Backrests
- 2 x Metal Sled Bases
- 1 x Hardware Pack (screws, washers, Allen wrench)
4. Setup and Assembly
Assembly is required for your Modway Parity Bar Stools. It is recommended to assemble the stools on a soft, clean surface to prevent scratching. Two people may be required for easier assembly.
- Carefully unpack all components and lay them out on a protected surface.
- Identify the upholstered seat/backrest unit and the metal sled base.
- Align the mounting points on the seat/backrest unit with the corresponding holes on the metal sled base.
- Insert the provided screws through the holes and loosely tighten them with the Allen wrench. Do not fully tighten yet.
- Once all screws are in place, gradually tighten each screw until secure. Avoid over-tightening.
- Repeat the process for the second bar stool.
Image 4.1: Rear view of the bar stool, illustrating assembly points.
Image 4.2: Detail of the boucle fabric and frame connection.
5. Operating Instructions (Usage)
These bar stools are designed for comfortable seating at bar-height surfaces. Ensure the stool is placed on a flat, stable surface before use. Always sit centrally on the seat to distribute weight evenly. Do not use the stool as a step ladder or for purposes other than seating.
Video 5.1: An overview video showcasing the Modway Parity Bar Stools, highlighting features like boucle fabric, dense foam padding, and powder-coated metal base.
6. Maintenance and Care
Proper care will extend the life and appearance of your bar stools.
- Regular Cleaning: Dust the fabric upholstery regularly with a soft, dry cloth or a vacuum cleaner with an upholstery attachment.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for boucle or upholstered furniture, testing on an inconspicuous area first.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the fabric and finish.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
- Hardware Check: Periodically inspect all screws and connections. Tighten any loose hardware to ensure stability and safety.
7. Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions:
- Wobbling Stool: Ensure all screws and bolts are securely tightened. Check that the stool is placed on a completely level surface. Adjust the position if necessary.
- Squeaking Noises: Loose hardware can cause squeaking. Tighten all assembly screws. Applying a small amount of silicone lubricant to the joints (avoiding fabric) may also help.
- Fabric Stains: Refer to the "Maintenance and Care" section for spot cleaning instructions. For persistent or large stains, it is advisable to consult a professional upholstery cleaner.
- Damaged Parts: If any part is damaged or broken, discontinue use immediately and contact Modway customer support for replacement parts or further assistance.
8. Specifications
Detailed specifications for the Modway Parity Boucle Bar Stools (Model: EEI-6473-BLK-IVO):
Image 8.1: Dimensions of the Modway Parity Boucle Bar Stool.
| Feature | Detail |
|---|---|
| Model Number | EEI-6473-BLK-IVO |
| Product Dimensions (D x W x H) | 21" x 17" x 41" (53.34 cm x 43.18 cm x 104.14 cm) |
| Color | Black Ivory |
| Frame Material | Powder-Coated Metal |
| Seat Material Type | Boucle Fabric |
| Leg Style | Sled |
| Number of Pieces | 2 |
| Item Weight (per stool) | 19 Pounds (8.6 kg) |
| Maximum Weight Recommendation | 330 Pounds (150 kg) |
| Required Assembly | Yes |
| GTIN / UPC | 889654275572 |
9. Warranty Information
For detailed information regarding the manufacturer's warranty for your Modway Parity Boucle Bar Stools, please refer to the product description on the retailer's website where you purchased the item. Alternatively, you may visit the official Modway website or contact their customer support directly for warranty terms and conditions.
10. Support
Should you require further assistance, have questions about your product, or need to report missing or damaged parts, please contact Modway customer support. You can typically find contact information on the official Modway website (www.modway.com) or through the retailer from whom you purchased the product.
When contacting support, please have your model number (EEI-6473-BLK-IVO) and proof of purchase readily available.