Product Overview
The Disney LAS4087 LED Lilo and Stitch Watch is a digital timepiece designed for children, featuring beloved characters Lilo and Stitch. It includes a luminous digital display for easy time reading, a date display function, and a comfortable printed strap with a traditional buckle closure. This watch is powered by a single CR2 battery.
Figure 1: Front view of the Disney LAS4087 LED Lilo and Stitch Watch, showing the digital display and character design.
Package Contents
- 1 x Disney LAS4087 LED Lilo and Stitch Watch
- 1 x CR2 Battery (pre-installed)
- Official Branded Packaging
- 1-Year Warranty Information
Setup
Battery Installation (If not pre-installed)
The watch typically comes with the battery pre-installed. If replacement is needed, locate the battery compartment on the back of the watch. Use a small screwdriver to open the compartment, insert one CR2 battery with the correct polarity, and securely close the compartment.
Wearing the Watch
Adjust the strap to fit comfortably around the wrist. The traditional buckle closure allows for secure fastening. Ensure the watch is not too tight or too loose for optimal comfort.
Figure 2: Example of the watch being worn on a child's wrist, demonstrating fit and appearance.
Operating Instructions
Displaying Time and Date
The watch features a power-saving mode where the display is off. To view the time, press the button located on the side of the watch case. The LED display will illuminate, showing the current time (hours and minutes).
To view the date, press the button again shortly after the time is displayed. The display will switch to show the month and day.
Setting Time and Date
- Press the button once to activate the display.
- Press and hold the button for approximately 3-5 seconds until the hour digits begin to flash.
- While the hour digits are flashing, press the button repeatedly to advance the hour.
- Once the correct hour is set, press and hold the button again until the minute digits begin to flash.
- Press the button repeatedly to advance the minutes.
- After setting the minutes, press and hold the button to move to the month setting (if applicable, or it might automatically save and exit).
- Repeat the process for setting the month and day if they flash.
- Release the button and wait a few seconds for the settings to be saved and the display to turn off.
Note: The exact sequence for setting may vary slightly. If the display does not flash, try pressing and holding the button for a longer duration or consult the packaging for specific instructions.
Figure 3: Close-up of the watch face displaying the time in LED format.
Maintenance
Cleaning
Wipe the watch case and strap with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or printed design. Ensure the watch is dry before storing.
Battery Replacement
When the display becomes dim or stops working, it is likely time to replace the battery. This watch uses one CR2 battery. It is recommended to have battery replacement performed by a qualified technician to ensure proper sealing and functionality, though it can be done by the user with care.
Storage
Store the watch in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to heat or cold can affect battery life and watch performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not light up. | Low or dead battery. | Replace the CR2 battery. |
| Time is incorrect. | Time needs to be reset. | Follow the "Setting Time and Date" instructions. |
| Display is dim. | Low battery. | Replace the CR2 battery. |
| Watch not responding to button presses. | Battery issue or internal malfunction. | Replace battery. If problem persists, contact customer support. |
Specifications
- Model: LAS4087
- Brand: Disney
- Display Type: LED Digital
- Movement Type: Quartz
- Case Material: Plastic
- Case Thickness: 10.0 millimeters
- Band Width: 15.0 millimeters
- Battery: 1 x CR2 (included)
- Product Dimensions (L x W x H): 21.5 x 1.5 x 1 cm
- Weight: 40 grams
Warranty and Support
This Disney LAS4087 LED Lilo and Stitch Watch comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear. For warranty claims or technical support, please contact the retailer or the manufacturer, Peers Hardy, directly. Please retain your proof of purchase for warranty validation.
For further assistance, you may refer to the contact information provided on the product packaging or the official Disney consumer products website.
