Important Safety Information
Please read all instructions carefully before using the CuPiLo Foot Massager. Retain this manual for future reference.
- Use the massager responsibly, avoiding use near water or in damp environments.
- Consult a physician before use if you have medical conditions that may be affected by massage, including but not limited to: pregnancy, pacemakers, diabetes, phlebitis, thrombosis, or increased risk of blood clots.
- Do not use the massager on swollen, inflamed, or injured areas of the skin.
- Always unplug the unit from the electrical outlet immediately after use and before cleaning.
- Do not operate the massager if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Keep the power cord away from heated surfaces.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Always follow the manufacturer's instructions for safe use and maintenance.
Product Overview
The CuPiLo Foot Massager with Heat (Model CPL-5522) is designed to provide a comprehensive foot massage experience, combining kneading, compression, heat, and vibration functions.
Key Features:
- Deep Kneading Massage: Targets specific areas of the feet to relieve tension.
- Adjustable Compression: Five customizable levels for instep, heel, and ankle.
- Soothing Heat Function: Adjustable heat settings (113–131°F) to promote circulation and comfort.
- Vibration Massage: Three distinct modes to enhance relaxation and revitalize tired feet.
- Removable and Washable Foot Sleeves: Ensures hygiene and ease of cleaning.
- User-Friendly Control Panel: Intuitive interface for easy operation.
- Fits Up to Men's Size 13: Accommodates a wide range of foot sizes.



Setup
Unpacking and Initial Placement:
- Carefully remove the CuPiLo Foot Massager from its packaging.
- Place the massager on a flat, stable, and dry surface. Ensure there is enough space around the unit for proper ventilation.
- Inspect the power cord and the unit for any visible damage. Do not use if damage is present.
- Plug the power adapter into the massager's power input port, then plug the adapter into a standard electrical outlet.

Operating Instructions
The control panel on the top of the massager allows for easy selection and adjustment of massage functions.
Control Panel Overview:
Refer to Figure 1 for the layout of the control panel. It typically includes buttons for Power, Kneading, Heat, Compression, and Vibration.
Powering On/Off:
- Press the Power button to turn the unit on. The default massage mode may activate automatically.
- Press the Power button again to turn the unit off.
Adjusting Massage Modes:
- Kneading: Press the Knead button to cycle through different kneading intensities (e.g., L, M, H).
- Compression: Press the Air button to adjust the compression intensity. There are 5 levels available.
- Vibration: Press the Vibration button to select from 3 vibration modes (e.g., L, M, H).
Using the Heat Function:
- Press the Heat button to activate the heating function.
- Press the Heat button again to cycle through available heat levels (e.g., Low, High) or to turn it off. The temperature range is typically 113–131°F.
Recommended Usage:
- Insert your feet into the foot sleeves.
- Select your desired massage modes and intensities.
- A typical massage session lasts 15-20 minutes. The unit may have an automatic shut-off feature for safety.
- Adjust settings as needed for optimal comfort.



Maintenance
Cleaning:
- Always unplug the massager from the power outlet before cleaning.
- The removable foot sleeves can be unzipped and washed by hand with mild soap and water. Allow them to air dry completely before reattaching.
- Wipe the exterior of the massager with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Ensure all parts are completely dry before plugging the unit back in or storing it.

Storage:
- Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on top of the massager.
- Keep the power cord neatly coiled and avoid wrapping it tightly around the unit.
Troubleshooting
If you encounter any issues with your CuPiLo Foot Massager, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Not plugged in; power outlet malfunction; damaged cord/plug. | Ensure power cord is securely plugged into both the unit and a working outlet. Check for power at the outlet. If cord/plug is damaged, discontinue use and contact support. |
| Massage intensity feels too weak or too strong. | Incorrect setting selected. | Adjust the Kneading, Air (compression), or Vibration settings using the control panel buttons. |
| Heat function is not working. | Heat function not activated; unit malfunction. | Press the Heat button to activate. Allow a few minutes for the heat to build up. If still not working, contact customer support. |
| Unusual noises during operation. | Normal operation sounds; internal component issue. | Some operational sounds are normal. If the noise is loud, grinding, or unusual, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact CuPiLo customer support for further assistance.
Specifications
Technical Data:
- Model Number: CPL-5522
- Product Dimensions: 17.36 x 13.78 x 7.56 inches
- Item Weight: 6.59 Pounds
- Power Source: Corded Electric
- Material: Faux Leather
- Heat Settings: 113–131°F (approx.)
- Compression Levels: 5
- Vibration Modes: 3
- Maximum Foot Size: Men's US Size 13
Warranty and Support
Manufacturer's Warranty:
The CuPiLo Foot Massager is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official CuPiLo website for detailed information regarding warranty terms and conditions.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact CuPiLo customer support. Contact information can typically be found on the product packaging, the official CuPiLo website, or through your retailer.






