Introduction
The Nitho Drive Pro V16 is a multi-format gaming steering wheel designed to enhance your racing simulation experience across various platforms. It features realistic driving feedback, a 270-degree rotation, dual vibration motors, and a comprehensive set of controls including pedals and a shifter, providing an immersive and precise gaming experience.
Image: The Nitho Drive Pro V16 gaming steering wheel, pedals, and shifter components.
What's in the Box
Please check the contents of your package to ensure all items are present:
- Racing Wheel
- Foot Pedal
- 2x C-Clamps
- USB Cable
- Manual (this document)
Product Features
Multi-Platform Compatibility
The Drive Pro V16 is designed for broad compatibility, supporting PlayStation 4, PlayStation 3, Xbox Series X/S, Xbox One (all versions), Nintendo Switch, and PC (D-Input & X-Input).
Image: Diagram illustrating compatibility with PS4, PS3, PC, Xbox One, Xbox Series X|S, and Switch.
Realistic Driving Feedback
Experience realistic rumbling motor feedback and a precise mechanism with 3 sensitivity levels. The wheel offers a 270-degree lock-to-lock rotation, simulating authentic driving feel.
Image: Diagram showing the 270-degree turning radius of the steering wheel.
Integrated Gear Shifter and Paddle Shifters
The wheel includes an integrated sequential gear shifter on the right side and F1-style paddle shifters for quick and accurate gear changes, enhancing realism and control.
Image: Close-up of the integrated gear shifter.
Image: Close-up of the F1-style paddle shifters located behind the steering wheel.
Separate Floor Pedals
The included separate floor pedals allow for a realistic body position, enabling precise braking and acceleration as you would in a real car. The pedal unit features a foldable footrest for comfort and compact storage.
Image: The separate pedal unit showing the brake and throttle pedals and the foldable footrest.
Secure Mounting Options
The steering wheel can be securely mounted to a table or racing stand using the included sturdy C-clamps or via high-quality suction cups for a stable setup during intense gameplay.
Image: Close-up of the suction cups on the underside of the steering wheel base.
Image: The two C-clamps used for securing the steering wheel to a surface.
Setup Instructions
Follow these steps to connect your Nitho Drive Pro V16 to your gaming system.
General Connection Overview
First, connect the foot pedal unit to the racing wheel using the dedicated cable. Then, connect the racing wheel to your gaming console or PC via the USB cable.
PC Setup
- Connect the foot pedal cable to the port on the racing wheel.
- Connect the racing wheel's USB cable to an available USB port on your PC.
- The system should automatically detect and install the necessary drivers. If not, please refer to the Nitho support website for driver downloads.
Image: Diagram showing the racing wheel connected to a PC and the brake pedal connected to the racing wheel.
PlayStation 4 (PS4) Setup
- Connect the foot pedal cable to the port on the racing wheel.
- Connect the racing wheel's USB cable to an available USB port on your PS4 console.
- Connect your PS4 controller to the racing wheel's dedicated micro USB port using a micro USB cable (not included). This is required for authentication.
- The PS4 system should recognize the racing wheel.
Image: Diagram showing the racing wheel connected to a PS4, the brake pedal connected to the racing wheel, and a PS4 controller connected to the racing wheel via micro USB.
Nintendo Switch Setup
- Connect the foot pedal cable to the port on the racing wheel.
- Connect the racing wheel's USB cable to an available USB port on your Nintendo Switch dock.
- Ensure "Pro Controller Wired Communication" is enabled in your Switch system settings (System Settings > Controllers and Sensors > Pro Controller Wired Communication).
- The Switch should recognize the racing wheel.
Image: Diagram showing the racing wheel connected to a Nintendo Switch dock and the pedals connected to the racing wheel.
Mounting the Wheel
For optimal stability, use either the C-clamps or the suction cups to secure the racing wheel to a flat, stable surface.
- Using C-Clamps: Attach the two C-clamps to the designated slots on the underside of the racing wheel base. Tighten the screws to firmly secure the wheel to your table or racing stand.
- Using Suction Cups: Ensure the surface is clean and smooth. Press the racing wheel firmly onto the surface to engage the suction cups.
Operating Instructions
Once connected, the Nitho Drive Pro V16 is ready for use. Familiarize yourself with the controls for an optimal gaming experience.
Button Layout and Functions
The racing wheel features action buttons conveniently located for smooth access to racing controls. The D-pad, sensitivity adjustment, and mode selection buttons are on the left side of the wheel base.
Image: Overview of the racing wheel showing the main controls and their positions.
Sensitivity Adjustment
The Drive Pro V16 offers 3 sensitivity levels to customize your steering response. Use the sensitivity switch on the left side of the wheel base to cycle through the settings (Low, Medium, High) to match your preference and game requirements.
Using the Shifters
- Paddle Shifters: Use the F1-style paddle shifters located behind the wheel for quick upshifts and downshifts.
- Sequential Gear Shifter: The right-side sequential gear shifter provides an alternative method for gear changes, adding to the realism.
Maintenance
To ensure the longevity and optimal performance of your Nitho Drive Pro V16, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the steering wheel, pedals, and shifter. Avoid using abrasive cleaners or solvents, as they may damage the finish.
- Storage: When not in use, store the unit in a clean, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the USB and pedal cables. Do not pull on the cables to disconnect them; always grasp the plug.
- Suction Cups: Periodically clean the suction cups and the surface they adhere to for maximum grip.
Troubleshooting
If you encounter issues with your Nitho Drive Pro V16, please refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Wheel not recognized by console/PC. |
|
| No vibration feedback. |
|
| Pedals not responding. |
|
| Wheel feels loose or unstable. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | MLT-DP16-K |
| Product Dimensions | 17.32 x 12.8 x 10.83 inches |
| Item Weight | 8.82 pounds |
| Manufacturer | NiTHO |
| Rotation Angle | 270 degrees lock-to-lock |
| Vibration | Dual rumbling motors |
| Compatibility | PC, PS3, PS4, Xbox One, Xbox Series X|S, Switch |
| Cable Length | 2.1M USB Cable Length |
Safety Information and Warnings
Please read and adhere to the following safety warnings:
WARNING:
- Please do not place the product at a high place to avoid falling.
- To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or play pens. This bag is not a toy.
For additional safety guidelines and regulatory compliance information, please refer to the manufacturer's official website or the packaging.
Warranty and Support
For warranty information, technical support, or to register your product, please visit the official Nitho website or contact their customer service. Details can typically be found on the product packaging or the manufacturer's website.
Manufacturer: NiTHO
Website: www.nitho.com
