1. Introduction
This manual provides comprehensive instructions for the T-DAGGER TGK313 Bora Gaming Mechanical Keyboard. Please read it carefully to ensure proper installation, operation, and maintenance of your device. This keyboard features hot-swappable mechanical switches, rainbow LED lighting, and a full key non-conflict design for an enhanced gaming and typing experience.
Image 1: Front view of the T-DAGGER TGK313 Bora Mechanical Keyboard, showcasing its full layout and rainbow LED backlighting.
2. Package Contents
Verify that all items are present in the package:
- T-DAGGER TGK313 Bora Mechanical Keyboard
- User Manual
- Keycap Puller (typically included for hot-swappable keyboards)
- Switch Puller (typically included for hot-swappable keyboards)
3. Setup Instructions
3.1 Connecting the Keyboard
- Locate an available USB port on your computer or laptop.
- Plug the USB connector of the T-DAGGER TGK313 keyboard firmly into the USB port.
- The operating system will automatically detect and install the necessary drivers. This process may take a few moments.
- The keyboard is ready for use once the LED lighting illuminates, indicating successful connection.
Image 2: The T-DAGGER TGK313 Bora Mechanical Keyboard positioned on a desk, demonstrating its illuminated keys and ready-to-use state.
4. Operating Instructions
4.1 Basic Key Functions
The T-DAGGER TGK313 features a standard keyboard layout. Many keys have secondary functions accessible by pressing the Fn key simultaneously with the desired function key (e.g., F1-F12 keys for media control or system functions).
4.2 LED Lighting Control
The keyboard features dynamic Rainbow LED Lighting with multiple effects and customization options. Use the following key combinations to control the lighting:
- Fn + Ins: Cycle through various lighting modes.
- Fn + Home: Adjust lighting color within certain modes.
- Fn + PgUp: Increase lighting brightness.
- Fn + PgDn: Decrease lighting brightness.
- Fn + Del: Change lighting direction or speed for dynamic effects.
- Fn + End: Turn the LED lighting on or off.
Image 3: An angled view of the T-DAGGER TGK313 Bora Mechanical Keyboard, highlighting the vibrant rainbow LED lighting effects across the keys.
4.3 Hot-Swappable Switches
The T-DAGGER TGK313 features hot-swappable mechanical switches, allowing users to change switches without soldering. This enables customization of typing feel and sound. Follow these steps for switch replacement:
- Removing a Keycap: Use the provided keycap puller to gently lift the keycap straight up from the switch stem.
- Removing a Switch: Use the provided switch puller to grasp the top and bottom clips of the switch. Apply gentle, even pressure and pull the switch straight up from the PCB.
- Installing a New Switch: Align the two metal pins of the new switch with the corresponding holes on the PCB. Gently push the switch down until it clicks securely into place. Ensure the pins are not bent during insertion.
- Installing a Keycap: Place the keycap over the switch stem and press down firmly until it is fully seated.
Image 4: A close-up view illustrating the hot-swappable mechanical switches and detached keycaps, demonstrating the ease of customization.
5. Maintenance
5.1 Cleaning the Keyboard
- Always disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth dampened with water or a mild, non-abrasive cleaning solution to wipe the keycaps and keyboard frame.
- For dust and debris accumulated between keys, use compressed air or a small, soft brush.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the keyboard's finish or keycap legends.
5.2 Switch Care
While switches are hot-swappable, avoid frequent removal unless necessary to prevent wear on the PCB sockets. When installing new switches, ensure they are aligned correctly to prevent bent pins, which can damage the switch or the keyboard's PCB.
6. Troubleshooting
- Keyboard not responding:
- Ensure the USB cable is securely connected to both the keyboard and a functional USB port on your computer. Try a different USB port. Restart your computer. Verify that no other software is interfering with keyboard input.
- LED lighting not working or behaving unexpectedly:
- Check if the lighting is turned off using the Fn + End combination. Adjust brightness with Fn + PgUp/PgDn. Cycle through modes with Fn + Ins. Ensure your computer's drivers are up to date.
- Certain keys not working:
- If a specific key is not responding, the switch might be faulty or improperly seated. Use the switch puller to carefully remove and then re-insert the switch for that key, ensuring the pins are straight and fully engaged. If the issue persists, consider replacing the switch with a new one.
- Keys are sticky or feel inconsistent:
- This could be due to debris under the keycap or within the switch. Remove the keycap and use compressed air to clean the area. If the issue is with the switch itself, consider replacing it.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | Bora |
| Item Model Number | TGK313 |
| Connectivity | USB Wired |
| Keyboard Type | Mechanical |
| Switch Type | Black Switch (Hot-Swappable) |
| Backlighting | Rainbow LED Lighting |
| Key Rollover | Full Key Non-Conflict |
| Language Layout | English & Arabic Keys |
| Compatible Devices | Laptop, PC |
| Material | Plastic |
| Dimensions | 37.7 x 15.8 x 5.3 cm (approximate) |
| Weight | 500 g (approximate) |
8. Warranty and Support
T-DAGGER products are designed for reliability and performance. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your product. You may also visit the official T-DAGGER website for the most up-to-date support resources. Please retain your purchase receipt as proof of purchase for any warranty claims.
