Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your SUPAREE Wireless Magnetic LED Trailer Lights (Model CL1076). Please read this manual thoroughly before use to ensure safe and efficient operation.
Package Contents
Verify that all items are present in your package:
- 2 x Wireless LED Towing and Trailer Lights
- 1 x 7-Pin to 4-Pin Transmitter
- 1 x Dual USB Charging Cable
- 1 x USB Cigarette Adapter
- 1 x User Manual
- 2 x Metal Brackets (if included in specific kit)
- 2 x Plastic Case (if included in specific kit)
Setup Instructions
- Charge the Lights: Before first use, fully charge both wireless trailer lights using the provided dual USB charging cable and USB cigarette adapter. A full charge takes approximately 2.5 hours and provides up to 10 hours of continuous use.
- Connect the Transmitter: Insert the 7-pin to 4-pin transmitter into your vehicle's trailer wiring harness. Ensure a secure connection.
- Activate the Lights: Short press the power button on each trailer light to turn them on.
- Mount the Lights: The lights feature powerful magnets. Attach them securely to any steel body or magnet-friendly surface on your trailer. Ensure they are positioned correctly for visibility (e.g., rear of the trailer).
- Pairing (if necessary): If the lights do not sync with your vehicle's signals, quickly press the button on the light three times. The yellow indicator light will flash, indicating the devices are resetting and automatically re-pairing.
- License Plate Light: To turn the license plate light on or off, press and hold the button on the light for 5 seconds.
Operating Instructions
Lighting Modes
The SUPAREE wireless trailer lights offer four essential lighting functions:
- Running Lights: (14 LEDs) Provides continuous illumination for visibility.
- Brake Lights: (10 LEDs) Activates a bright red light when braking.
- Turn Signals: (10 LEDs) Flashes to indicate turns (left and right).
- License Plate Lights: (4 LEDs) Illuminates the license plate.
Wireless Signal Transmission
The lights utilize an advanced 2.4GHz frequency band for stable signal transmission, providing a coverage range of over 100 feet (30.5 meters). This technology helps prevent interference from other electronic devices, ensuring consistent synchronization with your vehicle's control system.
Battery Indicator
The lights are equipped with a visual battery indicator to show the remaining charge:
- Green: 100% charge (approx. 10 hours runtime)
- Yellow: 50% charge (approx. 5 hours runtime)
- Red: 25% charge (approx. 2 hours runtime)
Maintenance
Durability and Weather Resistance
The lights are constructed from durable ABS plastic, making them impact-resistant. They are rated IP68 waterproof, ensuring reliable performance in various weather conditions, including heavy rain and snow. The operating temperature range is from -40°C to 65°C (-40°F to 149°F).
Cleaning
To clean the lights, wipe them with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic housing or lens.
Storage
When not in use, store the lights in a cool, dry place. Ensure they are fully charged before long-term storage to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on or respond. | Low battery; Transmitter not connected; Lights not paired. | Charge the lights fully. Ensure the transmitter is securely plugged into the vehicle's harness. Try re-pairing the lights by pressing the power button three times quickly. |
| Lights flicker or signal is inconsistent. | Signal interference; Transmitter or lights too far apart. | Ensure no other 2.4GHz devices are causing interference. Verify the distance between the transmitter and lights is within 100 feet. Check for obstructions. |
| Lights fall off during transit. | Insufficient magnetic adhesion; Bumpy road conditions. | Ensure the mounting surface is clean and flat. For added security, especially on rough terrain, consider using additional securing methods like zip ties or safety chains (not included). |
| Charging port pins are damaged. | Improper insertion of charging cable; Physical damage. | Always insert the charging cable carefully and avoid forcing it. If pins are damaged, contact customer support for assistance. |
| Lights do not hold a charge well. | Battery degradation; Incomplete charging cycles. | Ensure lights are fully charged each time. Avoid completely draining the battery frequently. If battery life significantly decreases, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | SUPAREE |
| Model Number | CL1076 |
| Light Source Type | LED (Total 58*2835 LED chips) |
| Wattage | 11 watts |
| Material | ABS Plastic |
| Waterproof Rating | IP68 |
| Operating Temperature | -40°C to 65°C (-40°F to 149°F) |
| Charging Time | Approx. 2.5 hours |
| Runtime | Up to 10 hours (continuous) |
| Wireless Frequency | 2.4GHz |
| Wireless Range | Over 100 feet (30.5 meters) |
| Vehicle Service Type | Boat, Trailer, Truck (Universal Fit) |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official SUPAREE website. Keep your purchase receipt as proof of purchase.