ScharkSpark NWT130 Remote Control Monster Truck Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective operation of your ScharkSpark NWT130 Remote Control Monster Truck. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Adult supervision is recommended during operation.
• Do not operate the vehicle near people, pets, or obstacles.
• Avoid contact with water or moisture to prevent damage to electronic components.
• Do not modify or disassemble the product.
• Ensure batteries are inserted with correct polarity.
• Remove batteries from the vehicle and remote control when not in use for extended periods.

Package Contents

Verify that all items are present in the package:

• Remote control car
• Remote control
• Rechargeable Lithium Ion Batteries (2 included)
• USB Charging Cable
• Small Screwdriver
• Water Dropper (for spray function)

Setup

1. Charging the Car Battery

1. Locate the battery compartment on the underside of the car. Use the provided screwdriver to open it.
2. Connect one of the rechargeable Lithium Ion batteries to the USB charging cable.
3. Plug the USB charging cable into a standard USB power adapter (not included).
4. The indicator light on the USB cable will show charging status (e.g., red for charging, off for fully charged).
5. A full charge typically takes approximately 60-90 minutes. Each battery provides about 30 minutes of playtime.
6. Once charged, disconnect the battery and securely place it into the car's battery compartment. Close the compartment with the screwdriver.

Image: The car's rechargeable battery connected to a USB charging cable, indicating the charging process.

2. Installing Remote Control Batteries

1. Open the battery compartment on the back of the remote control.
2. Insert two 1.5V 'AA' batteries (not included), ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

Image: The ScharkSpark NWT130 Remote Control Monster Truck with its accompanying remote control, illustrating the components.

3. Pairing the Remote Control

1. Turn on the car using the power switch located on the vehicle.
2. Turn on the remote control using its power switch.
3. The remote control and car will automatically pair. An indicator light on the remote may flash during pairing and become solid once connected.

4. Adding Water for Spray Function

1. Locate the water reservoir cap on the top rear of the car.
2. Carefully open the cap.
3. Use the provided water dropper to fill the reservoir with clean tap water. Do not overfill.
4. Close the cap securely.

Image: The remote control car with its mist spray function active, accompanied by visual cues for sound and light effects.

Operating Instructions

Basic Controls

• Left Joystick: Controls forward and backward movement.
• Right Joystick: Controls turning left and right.

Stunt Functions

The NWT130 is designed for various stunts:

• 360° Rotation: Push both joysticks in opposite directions (e.g., left joystick forward, right joystick backward) to perform a 360-degree spin in place.
• Upright Movement: The car can drive forward while standing on its rear wheels. Experiment with quick forward acceleration to initiate this stunt.

Image: The remote control car demonstrating its ability to perform various stunts, such as driving upright and rotating 360 degrees.

Light, Sound, and Spray Functions

The remote control features dedicated buttons for these effects:

• Mist Spray: Short press the designated spray button on the remote to activate the mist spray function. Ensure the water reservoir is filled.
• Light Effects: Long press the light button on the remote to cycle through three different light effects.
• Dinosaur Sound: The dinosaur sound can be controlled separately via a button on the remote.

Image: An illustration detailing the remote control car's sound, light, and spray features, with the remote control highlighting the corresponding buttons.

2.4GHz Anti-interference Control

The 2.4GHz frequency band allows multiple ScharkSpark NWT130 cars to be operated simultaneously without signal interference. This ensures a smooth and responsive control experience.

All-Terrain Capability

Equipped with flexible rubber tires and a powerful motor, the NWT130 is designed to operate on various surfaces, including:

• Room floor
• Grass
• Sand
• Light gravel

Image: The remote control car demonstrating its versatility by navigating different types of terrain, including rocky paths, wooden surfaces, roads, and grassy areas.

Maintenance

Cleaning

• Wipe the car with a soft, dry cloth after each use to remove dirt and debris.
• Do not use water or chemical cleaners directly on the electronic components.
• Ensure the water reservoir is emptied if the spray function will not be used for an extended period.

Battery Care and Storage

• Always remove batteries from both the car and the remote control when storing the product.
• Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• Do not store fully discharged batteries for long periods. Charge them periodically if storing for several months.

Troubleshooting

Specifications

• Model Number: NWT130
• Product Dimensions: 7.1 x 6.7 x 5.6 inches
• Item Weight: 1.48 pounds
• Control Frequency: 2.4GHz
• Car Battery: 2 Lithium Ion batteries (rechargeable)
• Remote Control Battery: 2 x 1.5V 'AA' batteries (not included)
• Manufacturer Recommended Age: 36 months - 12 years
• Material: Recyclable ABS, BPA-free

Warranty and Support

For warranty information or technical support, please contact ScharkSpark customer service directly. Refer to the product packaging or the official ScharkSpark website for contact details.