1. Introduction
Thank you for choosing the Satisure Wireless Door Chime System. This system provides a reliable and convenient way to monitor doors and windows, alerting you with an audible chime when they are opened. Featuring a 600ft wireless range, 58 selectable chimes, and 5 adjustable volume levels, this system is designed for various applications including homes, businesses, and stores. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
Figure 1: System Components (1 Receiver, 2 Sensors)
2. Setup
2.1 Initial Installation
The door chime receiver and door sensors are pre-paired at the factory for your convenience. Follow these steps for initial setup:
- Mount the Door Sensor: Choose a door or window where you want to detect opening. Attach the two parts of the sensor to the door/window frame and the moving part (door/window) using the provided adhesive pads or screws. Ensure the distance between the two sensor parts does not exceed 0.4 inches (approximately 1 cm) when the door/window is closed. The small magnet part should align with the marked area on the larger sensor unit.
- Plug in the Receiver: Insert the chime receiver into a standard electrical outlet in a central location within your desired monitoring area.
Figure 2: Sensor and Receiver Placement Example
2.2 Pairing Additional Sensors/Receivers
The Satisure system supports pairing up to 58 additional sensors or receivers. To pair a new sensor or receiver:
- Enter Pairing Mode on Receiver: Press and hold the volume button on the receiver for approximately 5 seconds until the LED indicator flashes rapidly.
- Activate Sensor: Within 10 seconds, separate the two parts of the door sensor you wish to pair. The receiver will chime once to confirm successful pairing.
- Exit Pairing Mode: Press the volume button again briefly to exit pairing mode.
Video 1: How to pair the door chime with the door sensor. This video demonstrates the steps for pairing a new door sensor with the chime receiver.
Video 2: How to pair with another door sensor. This video illustrates the process of adding an additional door sensor to your existing chime system.
Video 3: How to pair with another door chime. This video explains how to pair an additional chime receiver with your existing door sensors.
3. Operation
3.1 Adjusting Volume
The receiver offers 5 adjustable volume levels (0-110dB). To change the volume:
- Press the Volume Button (usually marked with a speaker icon) on the side of the receiver repeatedly to cycle through the volume levels.
- The LED indicator will flash and the chime will sound at the selected volume level.
3.2 Changing Ringtones
Choose from 58 different ringtones:
- Press the Up/Down Buttons (usually marked with arrows) on the side of the receiver to cycle through the available ringtones.
- Stop pressing when you hear your preferred ringtone. The selected ringtone will be saved automatically.
Figure 3: Receiver Buttons for Volume and Ringtones
Video 4: How to change the ringtone. This video demonstrates how to select a different chime sound on the receiver.
3.3 LED Indicator
The receiver features an LED indicator that flashes when a door or window is opened. This is particularly useful for individuals with hearing impairments or when the chime is set to silent mode.
Figure 4: LED Indicator on Receiver
4. Maintenance
4.1 Battery Replacement (Door Sensor)
The door sensors are powered by an alkaline battery designed for long-lasting use (up to 7200 activations). When the sensor's performance degrades or it stops triggering the chime, it's time to replace the battery.
- Locate the battery compartment on the larger part of the door sensor.
- Slide the battery cover off in the direction indicated by the 'UP' arrow on the back of the sensor.
- Remove the old battery and insert a new battery of the same type (e.g., 23A 12V Alkaline battery), ensuring correct polarity.
- Slide the battery cover back on until it clicks into place.
Figure 5: Door Sensor Battery Compartment
Video 5: How to replace the battery. This video provides a visual guide for replacing the battery in the door sensor.
4.2 Cleaning
Wipe the surfaces of the receiver and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chime does not sound when door/window opens. |
|
|
| Reduced wireless range. |
|
|
| Chime sounds unexpectedly. |
|
|
6. Specifications
- Brand: Satisure
- Model: Door Chime (1 Receiver & 2 Sensors)
- Color: White
- Power Source (Receiver): AC Plug-in
- Power Source (Sensor): Battery Powered (Alkaline, 3 Volts)
- Audible Noise: Up to 110 Decibels
- Wireless Range: Up to 600 ft (180 meters) in open area; 80 meters (260 ft) stated in specifications. Actual range may vary based on environment.
- Number of Chimes: 58
- Volume Levels: 5
- Control Method: Touch (buttons on receiver)
- Mounting Type: Door Mount (adhesive or screws)
- Sensor Technology: Contact Sensor
7. Warranty and Support
Satisure provides a 30-day no-reason return service from the date of purchase. Additionally, lifetime enthusiastic after-sales service support is available for all customers. For any questions, issues, or support needs, please contact Satisure customer service through your purchase platform or the official Satisure website.